Applications:

PRO – final and high-gloss finishing of splints
SLIM – for finishing splints, particularly interdentally and in the area of ligaments.

PKs 10 0r Pks 50

https://www.scheu-dental.com/en

https://www.eurodontic.co.uk/product-category/pressure-moulding/ministar-s-biostar-materials-and-finishing-tool-starter-kit/ 

DIMO® PRO / DIMO® PRO SLIM
It’s the combination of a special elastomer compound and fine fibre
structure that makes DIMO®PRO so versatile. You can achieve the best
results in grinding and smoothing as well as in polishing using different
speeds.
Application
DIMO®PRO: Finishing of large-scale marginal areas and for final and
high-gloss polishing of splints, positioners, mouth guard and orthodontic
appliances. Provides highly-polished rims and uniform surfaces of
hard/soft sandwich material.
DIMO®PRO SLIM: With tapered rim for finishing splints, best suited for
the gaps in the area of the frenulum and for interdental finishing.

SCHEU DENTAL

We offer you the 360° solution for the dental medicine of the future

Quality and innovation are our driving force.

We continuously develop new dental technology products for you – according to the latest state of knowledge and in close cooperation with recognized research institutions. Even with established products, we are always on the lookout for potential improvements, which is why we count on a constant exchange of ideas with dental practices and laboratories. This is the only way we can develop products that genuinely make the day-to-day work of orthodontists, dentists and dental technicians easier.

We are always at your side with competent advice, even after the purchase of our dental instruments – be it by personally setting up your technical SCHEU equipment or by answering specific practice related inquiries.

The post DIMO® PRO / DIMO® SLIM appeared first on Eurodontic.

DURASPLINT® LC  Light-curing, transparent resin, specifically designed for the adjustment of DURAN® splints with a minimal thickness of 1.5mm. Doesn’t require curing in an autoclave. For polymerisation, we recommend using the LC 6 Light Oven, with pre-set polymerisation times of 5 or 10 mins. Curing in the wavelength of 350-450nm. Prior to processing, LC Primer has to be applied to DURAN® splints. No yellow discolouration of material after light curing.

Pack includes 3 bars (38g).

Indications  anterior bite planes, Michigan Tanner, B-splits

DURASPLINT_LC_Instructions

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

https://www.scheu-dental.com/en 

The post DURASPLINT® LC appeared first on Eurodontic.

Our MENZANIUM® wire rods, crosscut and aligned, come in packages of 500 g.

*Nickel trace elements of 0 – 0.2% are procedurally possible.

https://www.scheu-dental.com/en/

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company

The post MENZANIUM® wire rods appeared first on Eurodontic.

Steady-Resin S+M

Universal monomer, can be processed with all STEADY-RESIN polymer versions. The clear monomer can be mixed with STEADY-RESIN coloured monomers.

Available in Clear and Pink   500ml Steady-Resin S+M

STEADY-RESIN is a highly transparent cold-cure resin, specifically designed for orthodontics and available in three different polymer versions
–S, M and VARIO– in accordance with the different processing types (see below). All STEADY-RESIN monomers can be combined with all
STEADY-RESIN polymers. STEADY-RESIN is fabricated on the base of methyl methacrylate, contains no cadmium and contains tertiary amines
for polymerisation. When processed properly, STEADY-RESIN is a safe medical product and highly biocompatible. Mica (available in silver, gold,
blue, red, green, rainbow, rainbow green, rainbow violet/REF 8144-8152) can be added to polymer; however overdosing can affect the polymerisation process or the stability.
Indication: STEADY-RESIN is intended solely for dental explications and indicated for expansion plates, retainers, activators, splints with adjusted surfaces etc.
Contraindication: The material is not indicated for production of dentures.
Intolerances: Allergy to methyl methacrylate (CAS 80-62-6) or dibenzoyl peroxide (CAS 94-36-0) or p-tolyldiethanolamine (CAS 3077-12-1). In case of highly
sensitized patients it is recommended to place the appliance in water for several hours to minimize the residual monomer content. Please refer to
the corresponding safety data sheet at www.scheu-dental.com/en/download.
Preparation: It is recommended to put the models in warm water at a temperature of 35°–40° C for about 10 min. in order to avoid bubble formation at the
basal surfaces.
Isolation: Apply one thin layer of orthodontic insulating agent (REF 8364) to the models. We rececommend using IMPRIMO® Model Separator (REF 6551)
for insulating 3D-printed models.
Processing: STEADY-RESIN S used for the so called “salt-and-pepper” technique is characterized by excellent stability. The resin is directly applied to the
model that has been insulated with orthodontic insulating agent. Apply monomer first and then alternately apply polymer and monomer using the
spray bottles (REF 8141) and spray nozzles (REF 8138/8139). The last layer to be applied before the polymerisation process should be polymer.
STEADY-RESIN M for the modelling technique is distinguished by excellent values in terms of flowability and processing range. It is mixed in
RESIMIX® cups prior to applying it to the model that has been pre-treated with orthodontic insulating agent.
STEADY-RESIN VARIO can be used universally for both, the salt-and-pepper and the modelling techniques thanks to the extended processing time.
Working parameters: The indicated values are to be understood as recommendations only and may be affected by room temperature and mixing ratio.
Processing time: 6– 8 minutes
Mixing ratio: STEADY-RESIN S 10 : 4 weight proportion polymer : monomer
STEADY-RESIN M / STEADY-RESIN VARIO 10 : 5 weight proportion polymer : monomer
This mixing ratio corresponds to about 2.7 : 1 volume of polymer : monomer.
Polymerisation: Curing shall always be carried out in a pressure pot filled with clean water; polymerisation shall not be interrupted and the values given below
should be neither higher nor lower. Any change to the parameters can lead to the formation of bubbles, inhomogeneity, increased shrinkage and
higher residual monomer content.
Temperature: approx: 45 – 48 °C / ≈ 113 °F
Pressure: 1.8 – 2.0 bar / ≈ 30 psi
Time: 15 – 20 min.
Finishing: Once polymerisation is completed, STEADY- RESIN can be finished and polished conventionally using carbide cutters. The use of respiratory
protection or local exhaust systems is recommended.
Shelf life/storage: For information on the shelf life/storage of the polymers and monomers see label imprint. Processing after the expiration date should be subject
to prior examination of the product. Once the resin has been filled in the transparent dosing bottles, these must be protected from direct sunlight,
as this may lead to polymerisation reactions and to changes in colour. The resin should always be stored in sealed dry containers at a temperature of max. 25 °C and protected from light.
Hazard warnings: The liquid is easily flammable! The liquid causes irritations of the eye, skin and respiratory tracts. Keep away from sources of ignition and
keep well ventilated, do not allow to enter the sewage system. Prolonged and direct skin contact with uncured material and inhalation of
monomer vapours can lead to irritations. Ensure to follow the instructions on wearing protective clothing as well as the information in
the safety data sheets at www.scheu-dental.com/en/download.
Hints: To be used only for the above indication and by qualified personnel. For single use. Serious incidents in connection with the use of the product

https://www.scheu-dental.com/en

The post Steady-Resin S+M appeared first on Eurodontic.

Available in Black and White

200g

STEADY-RESIN_Instructions

Data Sheet Steady Resin

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

https://www.eurodontic.co.uk/

The post STEADY-RESIN Polymer appeared first on Eurodontic.

Cutting bur

Spiral cutting bur for quick, neat cutting of hard pressure moulding
material.

HM Carbide cutter

Triangular carbide cutting bur for quick, neat cutting of hard pressure
moulding material.

HM Tricutter fine

Fine triangular cutter for interdental finishing of splints.

Finishing bur

Square cutting bur made of special soft alloy that will not damage
clasps and wires.

Cutting bur 6 pieces #3214
HM Carbide cutter, yellow 6 pieces #3369
HM Tricutter fine, green 6 pieces #3370
Finishing bur, red 6 pieces #3377

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

Scheu Dental

The post Finishing Bur appeared first on Eurodontic.

HM Tricutter

SCHEU-DENTAL Fine, triangular bur for interdental finishing. Pkt of 6.

Cutting bur

Spiral cutting bur for quick, neat cutting of hard pressure moulding
material.

HM Carbide cutter

Triangular carbide cutting bur for quick, neat cutting of hard pressure
moulding material.

HM Tricutter fine

Fine triangular cutter for interdental finishing of splints.

Finishing bur

Square cutting bur made of special soft alloy that will not damage
clasps and wires.

Cutting bur 6 pieces #3214
HM Carbide cutter, yellow 6 pieces #3369
HM Tricutter fine, green 6 pieces #3370
Finishing bur, red 6 pieces #3377

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

Scheu Dental

The post HM Tricutter appeared first on Eurodontic.

Cutting bur

Spiral cutting bur for quick, neat cutting of hard pressure moulding
material.

HM Carbide cutter

Triangular carbide cutting bur for quick, neat cutting of hard pressure
moulding material.

HM Tricutter fine

Fine triangular cutter for interdental finishing of splints.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

Scheu Dental

The post Cutting Bur appeared first on Eurodontic.

Cutting bur

Spiral cutting bur for quick, neat cutting of hard pressure moulding
material.

HM Carbide cutter

Triangular carbide cutting bur for quick, neat cutting of hard pressure
moulding material.

HM Tricutter fine

Fine triangular cutter for interdental finishing of splints.

Finishing bur

Square cutting bur made of special soft alloy that will not damage
clasps and wires

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

Scheu Dental

The post HM Carbide Cutter appeared first on Eurodontic.

VECTOR® Standard Expansion Screw

Scheu-Dental Skeletal expansion screw with bright yellow directional arrow for transversal expansion of the lower jaw. For treatment of Angle Class II cases we recommend using VECTOR® 100 in combination with VECTOR® 900.

VECTOR® Standard Expansion Screw available in 1pc or 50pcs

VECTOR_BRO_PM0135_GB_Original_2958

Vector Datasheet

H

ints on use of orthodontic screws
No matter how careful the manufacturing of the screws, a minimal gap between space-holder and
screw body can always occur. In order to prevent resin from penetrating in this gap and blocking the
screw thread as a result, we recommend to proceed as follows:
• Before inserting the screw make sure to tighten the marginal gap (if any) with liquid wax. We recommend
using paraffin-free wax.
• Apply a small amount of food-safe and resin-free oil to the screw spindle before polymerisation, in order to
guarantee free mobility of the screw.
• Once the resin has cured in the pressure pot, remove the space holder, separate the plate and soak it
shortly (for less than a minute) in no longer boiling water.
• Make sure to insert the key completely into the activation hole, exerting continuous pressure from both
sides in order to open the screw for the first time.
• In order to ensure optimal function, clean the screw thoroughly using steam jet after several turns.

Note:
For the pressure moulding method it is mandatory to use a thermoforming machine with positive pressure in
order to guarantee complete polymerization of the used resin (BIOCRYL® RESIN).
We recommend the following specialized literature for further information:
CA® Book Volume 2 Advanced
English: REF 5309 / German: REF 5307 / Spanish: REF 5318
Important:
Make sure not to exceed the maximal tooth movement in the CA® CLEAR ALIGNER technique acc. to
Dr. Pablo Echarri (CA® Book volume 2, Advanced, pages 52/53).

The post VECTOR® Standard Expansion Screws appeared first on Eurodontic.