https://www.rmoeurope.com/product-category/wires/elgiloy-en/?lang=en

https://www.rmoeurope.com/company/?lang=en

The Rocky Mountain^® Orthodontics (RMO effort began around 1930. Since then, the company has made dramatic advances in the science of orthodontics, establishing itself as one of the leaders of a rapidly evolving field – a field that down through the decades has made people’s lives better. Since its formal incorporation in 1933 as Rocky Mountain Metal Products, RMO^® has been known as a company of energy and ideas – traits that remain at the core of the company’s philosophy today.

RMO is much more than a business and model of excellence among Colorado corporations. The company is the oldest privately held orthodontic firm in the United States, and is a Denver institution whose company history is inextricably linked with the history of Denver and orthodontics itself.

The post RMO® Yellow Elgiloy appeared first on Eurodontic.

RMO Blue Elgiloy^®   is initially the softest of the tempers. It can be welded with low heat, and soldered without embrittling. Blue Elgiloy is recommended when the wire to be used is over .020” (0.508mm) or when the wire requires considerable bending, welding or soldering. Excellent for edgewise arches, lingual arches, retainers and removables. 14″

The Rocky Mountain^® Orthodontics (RMO effort began around 1930. Since then, the company has made dramatic advances in the science of orthodontics, establishing itself as one of the leaders of a rapidly evolving field – a field that down through the decades has made people’s lives better. Since its formal incorporation in 1933 as Rocky Mountain Metal Products, RMO^® has been known as a company of energy and ideas – traits that remain at the core of the company’s philosophy today.

RMO is much more than a business and model of excellence among Colorado corporations. The company is the oldest privately held orthodontic firm in the United States, and is a Denver institution whose company history is inextricably linked with the history of Denver and orthodontics itself.

https://www.rmoeurope.com/?s=blue+elgiloy&post_type=product&lang=en

nstitution and Determination

Before the advent of chrome alloy (stainless steel) and prior to the founding of RMO, orthodontists had to be skilled craftsmen as well as doctors. In fact, much of their time was spent devising, constructing, and maintaining their own oral appliances. Because those appliances were typically fabricated from gold alloy, which tended to loosen in a short period of time, a large part of an orthodontist’s work was dedicated to repairing and adjusting the appliances after they had been put into use.
The orthodontist’s job demanded mechanical skill, diligence, and even artistry. And yet, for all of the effort involved, the occupation was often less than rewarding. Even the best orthodontic appliances of the day were woefully limited in their effectiveness.

All that changed with the development of versatile stainless steel alloys, coupled with the ingenuity and foresight of RMO‘s founder, Dr. Archie Brusse, a pioneer Denver orthodontist. With a small but capable staff, and with help from an executive at the American Steel and Wire Company, RMO set about developing the first set of prefabricated orthodontic appliance options. After much clinical research and experimentation, the first system of options was unveiled in 1933 at the annual meeting of the American Association of Orthodontists. Reception was negative. Most recognized leaders of that day said it wouldn’t work.

The post RMO® Blue Elgiloy® Wire 14″ appeared first on Eurodontic.

Round straight 14 inch length

Great for bonded retainers

RMO® Inc.

The Rocky Mountain^® Orthodontics (RMO effort began around 1930. Since then, the company has made dramatic advances in the science of orthodontics, establishing itself as one of the leaders of a rapidly evolving field – a field that down through the decades has made people’s lives better. Since its formal incorporation in 1933 as Rocky Mountain Metal Products, RMO^® has been known as a company of energy and ideas – traits that remain at the core of the company’s philosophy today.

RMO is much more than a business and model of excellence among Colorado corporations. The company is the oldest privately held orthodontic firm in the United States, and is a Denver institution whose company history is inextricably linked with the history of Denver and orthodontics itself.

Institution and Determination

Before the advent of chrome alloy (stainless steel) and prior to the founding of RMO, orthodontists had to be skilled craftsmen as well as doctors. In fact, much of their time was spent devising, constructing, and maintaining their own oral appliances. Because those appliances were typically fabricated from gold alloy, which tended to loosen in a short period of time, a large part of an orthodontist’s work was dedicated to repairing and adjusting the appliances after they had been put into use.
The orthodontist’s job demanded mechanical skill, diligence, and even artistry. And yet, for all of the effort involved, the occupation was often less than rewarding. Even the best orthodontic appliances of the day were woefully limited in their effectiveness.

All that changed with the development of versatile stainless steel alloys, coupled with the ingenuity and foresight of RMO‘s founder, Dr. Archie Brusse, a pioneer Denver orthodontist. With a small but capable staff, and with help from an executive at the American Steel and Wire Company, RMO set about developing the first set of prefabricated orthodontic appliance options. After much clinical research and experimentation, the first system of options was unveiled in 1933 at the annual meeting of the American Association of Orthodontists. Reception was negative. Most recognized leaders of that day said it wouldn’t work.

In time, the impact of these prefabricated devices on the world of orthodontics was dramatic. Simply put, they changed the face of dentistry. The wide variety of appliance shapes and sizes supplied by RMO^® enabled orthodontists to treat a diverse array of patients more effectively.

“What was developed was a way of putting things together that provided more effective and creative options for doctors,” says Martin Brusse, RMO^® Chairman and Chief Executive Officer, and son of the company’s founder. “The orthodontist could employ a greater variety of different techniques through more individualized diagnosis and treatment. Patients would benefit.”

The post Supra-Flex™ Twisted Wire (6 strands) appeared first on Eurodontic.

Our MENZANIUM® coil wires are diamond drawn and high gloss polished. Processing by joining techniques such as laser-welding and welding. Measurements, tolerances and quality in accordance with DIN EN ISO 15841.

• Laboratory coil: 10-50 m wire length
• Clincial coil: 58-330 m wire length (coil of 500g)

*Nickel trace elements of 0 – 0.2% are procedurally possible.

Data sheet

https://www.scheu-dental.com/en/

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

The post MENZANIUM® coil wire appeared first on Eurodontic.

Our MENZANIUM® wire rods, crosscut and aligned, come in packages of 500 g.

*Nickel trace elements of 0 – 0.2% are procedurally possible.

https://www.scheu-dental.com/en/

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company

The post MENZANIUM® wire rods appeared first on Eurodontic.

QuadHelix_BPZ_PM0115_GB_Original_3372

Important information!
The Quad Helix should be securely
ligated into the lingual/palatal sheath with
steel or elastic ligatures!
FOR SINGLE USE ONLY
This product contains nickel and chromium.
Patients known to be allergic to these metals
should not be treated with this product.

https://scheu-dental.com/en 

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

https://www.scheu-dental.com/en

The post Lingual/ palatal sheath appeared first on Eurodontic.

QuadHelix_BPZ_PM0115_GB_Original_3372

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

https://www.scheu-dental.com/en

The post Quad Helix appeared first on Eurodontic.

SCHEU-DENTAL Crosscut and aligned wire rods made of chrome nickel steel (DIN material no. 1.4310), available in two versions hard (1400-1600 N/mm²) and spring hard (1800-2000 N mm²). Processing by joining techniques such as laser-welding and welding. Measurements, tolerances and quality in accordance with DIN EN ISO 15841.

All packages contain 500 g.

SCHEU DENTAL

About us

In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

As a manufacturer of medical devices, we also bear a special responsibility. That is why we comply with the requirements of the EU Medical Device Regulation 2017/745 (MDR) with the utmost care. Our products stand for the highest standards of quality, safety and performance – confirmed by our MDR certification.

https://www.scheu-dental.com/en/

The post CHROMIUM wire rods appeared first on Eurodontic.

• Laboratory coil: 10-50 m wire length
• Clinical coil: 26-324 m (coil of 500g)

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

https://www.scheu-dental.com/en

The post CHROMIUM coil wire appeared first on Eurodontic.