The ideal solution for every aligner treatment.
Scheu-Dental innovative thermoforming sheet sets new standards for greater efficiency and comfort during aligner treatment. With just one layer, the Scheu-Dental UNIQ+ pd achieves what many multilayer foils cannot achieve. With its single layer material, it permanently withstands forces
during the entire treatment. The result? A pleasant wearing comfort with gentle initial forces and constant restoring forces. With UNIQ, we have developed a foil that achieves maximum benefits in every aligner treatment with just one layer!

Innovative
With just one layer, UNIQ offers outstanding material properties and also stands out from other aligner foils with its wide range of thicknesses. This makes it a versatile and attractive option for orthodontists and patients.

Long-term elasticity
With UNIQ, we achieve remarkably high elasticity while guaranteeing consistently good performance throughout the entire aligner treatment. This performance is achieved with just a single layer – a benchmark that many cannot even achieve with multiple layers.

Comfortable
Reduced initial forces and constant restoring forces not only ensure a gentle wearing sensation, but also smooth planning during the entire aligner treatment with UNIQ.

Reliable
The single layer material of the UNIQ makes post-processing considerably easier compared to multilayer foils. Fewer breaks can also ensure a smooth clinical procedure.

Sustainable
Compared to multilayer foils, UNIQ requires significantly less energy during production, which not only protects the environment in the long term, but is also much more cost-efficient. The surplus material from production is also recyclable and can be reused.

https://scheu-dental.com/en

https://www.eurodontic.co.uk/product-category/pressure-moulding/materials-accessories/

The post UNIQ+ pd appeared first on Eurodontic.

Applications – occlusal splints and retainers.

https://schttps://www.eurodontic.co.uk/product-category/pressure-moulding/materials-accessories/

https://scheu-dental.com/en 

Ministar_Biostar_Application_manual.pdf (eurodontic.co.uk)

DURAN+_Instructions

Datasheet-DURAN_plus

Description: DURAN®+ is a clear-transparent, tough and abrasion-resistant PET-G thermoforming material with outstanding properties in terms of breaking strength, elasticity and dimensional stability. DURAN®+ belongs to the family of polyester resins, combining extremely low water absorption and highest biocompatibility (it does not require pre-drying).
The material has been tested and approved in terms of cell biology.
Indication: is ideally suited for all indications in prosthetic and orthodontic splint therapy, such as Miniplast splints,
occlusal splints with and without adjustments, CMD splints, retention splints, Essix retainer and palatal expansion.
As hard-elastic splint material, DURAN®+ is predestined for tooth transpositions, fine corrections and retentions in
splint therapy.

Pessure moulding: Full models should be embedded in the pellets and dental arcade models should be placed on the model platform.
As you can see from the imprint directly on the material or on the packaging labels, the heating times for DURAN®+ are
extremely short. The initial thickness of DURAN®+ will be reduced slightly depending on the model height. Make sure
to remove the integrated protection foil after taking off the splint from the model and prior to inserting it.
Finishing: Up to a thickness of 1.0 mm, DURAN®+ can be easily trimmed with SD-Foil scissors A (REF 3460). For thicknesses exceeding 1.0 mm, we recommend using the finishing set (REF 3378). Final trimming and polishing can be most effectively done with DIMO / DIMO® PRO discs (REF 3380-3384/3376). Compound and adjustment with cold cure resins such as
DURASPLINT® are possible without any problems. For most C+B and/or temporary materials – especially bis-acrylic
composites – the use of a bonding agent is recommended. Make sure to check the suitability of the corresponding
bonding agent prior to using it.
Cleaning/care: Products from the CETRON® range are the best choice for daily cleaning and care. Detergents or products on the base
of alcohol or plants (e.g. Pyralvex®) as well as hot water or steam jets should not be used.
Note: Heating times of less than 20 seconds can not be coded in BIOSTAR® devices. In these cases, the heating time must
be entered manually using the key with the „clock symbol“.
Storage: Protect from sunlight. Store in a dry place.

The post Duran® + 125mm rd (with insulation foil attached) appeared first on Eurodontic.

Applications:

PRO – final and high-gloss finishing of splints
SLIM – for finishing splints, particularly interdentally and in the area of ligaments.

PKs 10 0r Pks 50

https://www.scheu-dental.com/en

https://www.eurodontic.co.uk/product-category/pressure-moulding/ministar-s-biostar-materials-and-finishing-tool-starter-kit/ 

DIMO® PRO / DIMO® PRO SLIM
It’s the combination of a special elastomer compound and fine fibre
structure that makes DIMO®PRO so versatile. You can achieve the best
results in grinding and smoothing as well as in polishing using different
speeds.
Application
DIMO®PRO: Finishing of large-scale marginal areas and for final and
high-gloss polishing of splints, positioners, mouth guard and orthodontic
appliances. Provides highly-polished rims and uniform surfaces of
hard/soft sandwich material.
DIMO®PRO SLIM: With tapered rim for finishing splints, best suited for
the gaps in the area of the frenulum and for interdental finishing.

SCHEU DENTAL

We offer you the 360° solution for the dental medicine of the future

Quality and innovation are our driving force.

We continuously develop new dental technology products for you – according to the latest state of knowledge and in close cooperation with recognized research institutions. Even with established products, we are always on the lookout for potential improvements, which is why we count on a constant exchange of ideas with dental practices and laboratories. This is the only way we can develop products that genuinely make the day-to-day work of orthodontists, dentists and dental technicians easier.

We are always at your side with competent advice, even after the purchase of our dental instruments – be it by personally setting up your technical SCHEU equipment or by answering specific practice related inquiries.

The post DIMO® PRO / DIMO® SLIM appeared first on Eurodontic.

A win for your daily laboratory and practice routine!
Productive, precise and flexible – start your own high-end production now, enabling you to thermoform up to 4 aligners at the same time.

High Productivity

Make your workflow more comfortable and efficient. With the SCHEU DENTAL BIOSTAR® 4-Aligner it is possible to thermoform up to
4 foils at the same time and thus 120 aligners in one hour.

Precise Results

Each foil is individually heated in its own pressure chamber and thermoformed at 4 bar. The foils fit perfectly to the
tooth rim, thus achieving optimum pressure molding results with the usual high aligner quality.

Flexible Processes

With the Scheu Dental Biostar 4 Aligner , you can choose from various SCHEU-DENTAL foil formats depending on your individual
preference: Round foils (Ø 120-125 mm) or rectangular stripes exclusively available from SCHEU-DENTAL for
quadruple application (499 x 114 mm).

Features BIOSTAR® 4-Aligner

BIOSTAR® 4-Aligner 95-230 V
REF #3030
Power 1450 watt
Working pressure 4 bar
Dimensions (W x D x H) 612 x 337 x 524 mm
Weight 50 kg

With the BIOSTAR® 4-Aligner, you can choose from various SCHEU-DENTAL foil formats depending on your individual
preference: Round foils (Ø 120-125 mm) or rectangular stripes exclusively available from SCHEU-DENTAL for
quadruple application (499 x 114 mm)

An unbeatable combination.

Perfect results with the innovative foil format from SCHEU-DENTAL.

The stripes, which are exclusively available from SCHEU-DENTAL, are designed for quadruple application and are provided with a scannable code. As with all SCHEU-DENTAL thermoforming units, all you have to do is scan the code on the stripes and the parameters for the thermoforming process, such as heating and cooling times, are preset. Round foils (Ø 120-125 mm) can also be thermoformed easily with the BIOSTAR® 4-Aligner to produce up to 2 aligners at the same time.

BIOSTAR 4-Aligner_BRO_PM5374_11_23

SCHEU-DENTAL: Your expert for dental technology / SCHEU-DENTAL

The post Scheu-Dental Biostar® 4-Aligner appeared first on Eurodontic.

CA^® Pro+ can be used as independent aligner material or within the 3-splint-system of the CA^® protocol.

With integrated insulation foil.

The powerful thermoforming material with flexible
elastomer layer

More endurance, less pressure: CA® Pro is setting new standards in
aligner treatment. A flexible elastomer core in a hard-elastic double shell
ensures a continuous power level at a reduced initial force and higher
patient comfort.
CA® Pro can be used as single-splint aligner material as well as within the
3-splint system according to the CA® protocol.

high elasticity and break resistance thanks to a flexible elastomer layer
continuous force transmission, minimal loss of power
high wearing comfort thanks to gentle initial force
also available: CA® Pro+ with integrated protection foil

Standard single-layer aligner material is usually
loosing its high initial force with the resulting
unfavourable physiological effects quickly during
the treatment period.
Due to its double shell construction with elastomer
core, CA® Pro exerts less pressure – while at the
same time keeping it much longer. By starting with
a lower initial force and maintaining a relatively
constant force level over the treatment period, the
patient will benefit from a gentler and more effective tooth movement with higher wearing comfort.

The forces between aligner and teeth lead to a
permanent deformation of the aligner during wearing time. As a consequence, this deformation also
reduces the aligner`s potential to move teeth. With
standard single-layer aligner material, the loss of
transposition potential amounts to almost 50 %
after the first day of treatment.
This is where CA® Pro comes in with improved
elastic properties: thanks to the elastomer core,
the aligner can withstand deformation for a longer
period of time, thus transferring its transposition force onto the teeth over a longer distance.
Compared to single-layer aligner material, this
leads to a 72 % higher transposition potential after
six days of treatment and thus to a more continuous tooth movement over the wearing time

CA_Pro-e-Leaflet.pdf (eurodontic.co.uk)

Datasheet-CA-Pro

https://scheu-dental.com/en

The post CA® Pro+ (with insulation foil attached) appeared first on Eurodontic.

CETRON

CETRON_Patient Infomation

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

https://www.scheu-dental.com/en/

The post Cetron® Cleanser appeared first on Eurodontic.

HM Tricutter

SCHEU-DENTAL Fine, triangular bur for interdental finishing. Pkt of 6.

Cutting bur

Spiral cutting bur for quick, neat cutting of hard pressure moulding
material.

HM Carbide cutter

Triangular carbide cutting bur for quick, neat cutting of hard pressure
moulding material.

HM Tricutter fine

Fine triangular cutter for interdental finishing of splints.

Finishing bur

Square cutting bur made of special soft alloy that will not damage
clasps and wires.

Cutting bur 6 pieces #3214
HM Carbide cutter, yellow 6 pieces #3369
HM Tricutter fine, green 6 pieces #3370
Finishing bur, red 6 pieces #3377

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

https://www.scheu-dental.com/en/about-us 

The post HM Tricutter appeared first on Eurodontic.

Cutting bur

Spiral cutting bur for quick, neat cutting of hard pressure moulding
material.

HM Carbide cutter

Triangular carbide cutting bur for quick, neat cutting of hard pressure
moulding material.

HM Tricutter fine

Fine triangular cutter for interdental finishing of splints.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

https://www.scheu-dental.com/en/about-us 

The post Cutting Bur appeared first on Eurodontic.

Cutting bur

Spiral cutting bur for quick, neat cutting of hard pressure moulding
material.

HM Carbide cutter

Triangular carbide cutting bur for quick, neat cutting of hard pressure
moulding material.

HM Tricutter fine

Fine triangular cutter for interdental finishing of splints.

Finishing bur

Square cutting bur made of special soft alloy that will not damage
clasps and wires

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

https://www.scheu-dental.com/en/about-us 

The post HM Carbide Cutter appeared first on Eurodontic.

UNIQ pd

The ideal solution for every aligner treatment.
Scheu-Dental innovative thermoforming sheet sets new standards for greater efficiency and comfort during aligner treatment. With just one layer, the UNIQ achieves what many multilayer foils cannot achieve. With its single layer material, it permanently withstands forces
during the entire treatment. The result? A pleasant wearing comfort with gentle initial forces and constant restoring forces. With UNIQ, we have developed a foil that achieves maximum benefits in every aligner treatment with just one layer!

Innovative
With just one layer, UNIQ offers outstanding material properties and also stands out from other aligner foils with its wide range of thicknesses. This makes it a versatile and attractive option for orthodontists and patients.

Long-term elasticity
With UNIQ pd , we achieve remarkably high elasticity while guaranteeing consistently good performance throughout the entire aligner treatment. This performance is achieved with just a single layer – a benchmark that many cannot even achieve with multiple layers.

Comfortable
Reduced initial forces and constant restoring forces not only ensure a gentle wearing sensation, but also smooth planning during the entire aligner treatment with UNIQ.

Reliable
The single layer material of the UNIQ makes post-processing considerably easier compared to multilayer foils. Fewer breaks can also ensure a smooth clinical procedure.

Sustainable
Compared to multilayer foils, UNIQ requires significantly less energy during production, which not only protects the environment in the long term, but is also much more cost-efficient. The surplus material from production is also recyclable and can be reused.

Conventional single layer aligner materials typically have a high initial force, which quickly decreases during the course of treatment. In comparison,
UNIQ exerts less pressure due to its improved material properties, but maintains this pressure over a longer period of time. The initial force of the
aligner is lower and the force level remains constant during treatment. For the patient, this means smoother and more effective movement of the
teeth with greater comfort.

https://scheu-dental.com/en 

The post UNIQ pd appeared first on Eurodontic.