BLUE-BLOKKER ®

SCHEU-DENTAL Light-curing, blue transparent blocking out and modelling material. For fabrication of space maintainers for bleaching splints and medical trays, and sealing saw cuts in set-up models. Can also be used in prosthetics. Curing in wavelength range of 380-470nm. 4×1.5g.

BLUE-BLOKKER® is applied directly from the dosing syringe and can be easily combined with conventional waxes. Light-hardened BLUE-BLOKKER® outdoor telescopes are stable and can be lifted off without tension. BLUE-BLOKKER® also burns at large layer thicknesses, residue-free. The casting results are absolutely dimensionally stable with excellent fit accuracy.
The thixotropic adjustment of the material as well as the micro- and Mini cannulas facilitate the targeted dosing and application of the
Material. Curing is carried out using commercially available UV lamps in the spectral range of 380-470 nm. Depending on the material order and Lamp type hardens BLUE-BLOKKER® in 10-30 sec.

– Sealing saw cuts and blocking teeth and teeth segments after adjustment in the set-up technique.

– Precise application of the gel reservoir – (depending on the bleaching
system) – in accurately defined thickness for bleaching and fluorisation splints and medical trays.

– Blocking out cervical margins, gaps, and strongly divergent teeth as
well as fixing wire elements when fabricating hard elastic splints.

– Applying BLUE-BLOKKER ® directly out of the dosing tip. BLUEBLOKKER ® can be very well combined with conventional waxes.
Light-cured BLUE-BLOKKER ® outer telescopes will be very stable
and can be removed easily without tension. Even when working with
higher thicknesses, BLUE-BLOKKER ® will burn without residues. The
results will show high dimensional stability and perfect fitting.

– The ideal viscosity and the micro and mini cannula allow precise application of the material. Curing with standard UV light in the spectral
range of 380-470 nm. Depending on material quantity and type of
light, BLUE-BLOKKER ® cures within 10-30 seconds.

BLUE-BLOKKER_VKP_0189_GB_Original_3366

https://scheu-dental.com/en

The post BLUE-BLOKKER ® appeared first on Eurodontic.

Also available in 0.1x 120mm (100) NOT FORR MINISTAR

Ministar_Biostar_Application_manual

Datasheet-ISOFOLAN

https://www.scheu-dental.com/en

The post Isofolan® appeared first on Eurodontic.

Scheu-Dental Blocking Out Putty is a permanently plastic putty for blocking-out large-scale undercuts.

PDB-blocking-out-putty-GB_Original_3041 (2)

https://www.scheu-dental.com/en/

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company

The post Blocking-out putty appeared first on Eurodontic.

3 blocks of 50 g.

https://www.eurodontic.co.uk/

The post Set-up wax blocks appeared first on Eurodontic.

Alginate insulation for plaster models. Single apply provides optimum insulation.

https://www.scheu-dental.com/en/

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company

The post Orthodontic Insulating Agent appeared first on Eurodontic.

Water-based, blue transparent gel for insulation when fabricating removable orthodontic appliances on 3D printed models. Optimal insulating effect using IMPRIMO® LC resins and STEADY-RESIN autopolymerisates. Apply a thin layer with appropriate brush and let it dry properly. Not suitable for 3D models generated by a filament printer!

Available as 100 ml pump bottle with brush or as 500 ml refill bottle. Download the STL file to print yourself a rack for both pump bottle and brush.

No hazardous material in terms of transport regulations.

(brush comes with the 100ml bottle and is not sold separately)

Processing/application:

Once the position for the expansion screw has been marked, mill a recess for the screw spacer. Bend the wire elements. Block out undercuts using thermal wax. Apply the IMPRIMO® Model Separator from the pump bottle, distribute it evenly with the enclosed brush and allow to dry well.
The use of the LC-6 Light Oven is recommended to shorten the drying time. Fix the expansion screw(s) and wire elements as usual with adhesive wax on the dry and insulated resin model. Process resin following the instructions for the orthodontic technique. Once the resin has polymerised, carefully lift the orthodontic plate from the 3D model using a plaster knife. Rinse model and expansion plate under running water.

Remove wax residues using steam jet. Finish and polish the expansion plate conventionally

Light wavelength 350nm and 450nm

IMPRIMO_Model_Separator_PM0319_GB_Original_10222

IMPRIMO® Model Separator – application video — Eurodontic

www.scheu-dental.com/fileadmin/SCHEU-DENTAL/Downloads/10_Support_und_Software/Rack_for_6551_Scheu_brush.STL

https://www.scheu-dental.com/en

The post IMPRIMO® 3d Model Separator appeared first on Eurodontic.

Bioplast® Insulanting Agent instructions:

BIOPLAST_Insulating agent instructions

E-3D-Modellisolierung

https://scheu-dental.com/en #

https://www.eurodontic.co.uk/product-category/pressure-moulding/ministar-biostar/

Bioplast bleach for bleaching trays:

Description: BIOPLAST® bleach is a soft elastic rubber-like thermoforming material made of ethylene vinyl acetate (EVA) that
does not bond to acrylic. The material does not require predrying before pressure moulding, as it is not hygroscopic.
The material has been tested and approved for its biological safety.

Indication: Due to its material characteristics, BIOPLAST® bleach is ideally suited for  bleach trays for teeth whitening and medical trays. The material has a higher degree of stability than the standard BIOPLAST® material, ensuring a more precise marginal adaptation.

Contraindication: Allergic reactions to components of BIOPLAST® bleach (EVA) cannot be ruled out in sensitized people. Any use not
stated above is contraindicated.

Preparing the model: Apply BLUE-BLOKKER® that serves as a space holder in the required layer thickness to the surfaces that you want to
bleach or treat. We recommend using BIOPLASTIC® insulating agent (REF 3189/3166) for model isolation. Apply one
thin layer of the insulating agent to the model, making sure to prevent the liquid from accumulating in the cavities as
well as from drying out.

Pressure moulding: Generally speaking, we recommend to place dental arches on the model and to embed full models into the pellets.
Adhesion of pellets to the model and the resulting loss of pellets can be considerably reduced by using the pellet cover
(REF 3006 large/REF 3007 small).

Finishing: You can reduce the splint to its final extension using the foil scissors A (REF 3460) and DIMO® PRO SLIM (REF 3376).

Cleansing/care: Our CETRON® cleansing and care products are the best choice for  bleach trays for teeth whitening made of BIOPLAST® bleach.

Note: The product must only be used for the indication specified above and by qualified personnel. For single use. Any serious

The post Bioplast® Insulanting Agent appeared first on Eurodontic.

3D Model Insulation is best suited for insulation of acrylate-based printed models. Once the insulation applied, it is possible to manufacture orthodontic plates on the models using cold cure resin like STEADY-RESIN S in the salt and pepper technique.
For an optimum insulation effect resin against resin it is sufficient to apply just one or two layers with the enclosed brush. In order to prevent skin contact we recommend wearing gloves.
The drying time of the 3D model insulation is approx. 30 min.
After polymerisation, the orthodontic plate should be cleaned by steam blasting and in an ultrasonic bath in order to remove any insulation residues.
Use CETRON® spray to make the surface shine.
Important notice: Only for extraoral application.

3D_Model_Instructions

3D-Model_Datasheet

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

https://www.scheu-dental.com/en 

The post 3D Model insulating agent appeared first on Eurodontic.

https://www.scheu-dental.com/en

Scheu-Dental

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

From family business to corporate network.

With SCHEU-DENTAL GmbH, SCHEU-DENTAL custom-made GmbH and  SMILE-Dental-Handelsgesellschaft mbH, we offer you three reliable partners who are at your side in the field of dental technology. We create sophisticated designs with sensitivity and experience. Through regular product inspections in accordance with the latest certification standards, we ensure that our quality standards are always maintained.

The post CA® FLASH appeared first on Eurodontic.

Withstands temperatures used in thermoforming.

SIL-KITT Available in Red or Clear

Scheu-Dental 

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

https://www.scheu-dental.com/en

The post SIL-KITT appeared first on Eurodontic.