contact us for more info at  sales@eurodontic.co.uk

THROUGHPUT MEETS PRECISION

The post SprintRay PRO 2 appeared first on Eurodontic.

We offer free CPD training and support to our customers, as well as offering a machine repair and loan service.

For machine purchases, we ask for a 70% deposit via BACS. We will contact you to arrange this once you place the order.

The compact Scheu Ministar device  is equipped with advanced scanning technology. The scanner reads the coded material, allowing programming of all important parameters such as heating time, temperature and cooling time.

A compressor is required to operate the Ministar. 

In other words, ultra precise pressure moulding results are achieved in record time, thanks to the rapid, patented heater and working pressure of 4.0 bar, adjustable via pressure regulator. The new generation machines are equipped with user-friendly membrane keypad and large display. All operating parameters are monitored and indicated on the display.

Technical data

• • Power: 230/115/100 V, 750 W
  • Working pressure: 0.5 – 4.0 bar
  • Dimensions (W × H × D): 500 × 210 × 400 mm
  • Weight: 9 kgs
  • 3 years warranty, 10 years availability of spare parts
• • . compressor is recommended with an output greater than 4 bars of pressure,  The Ministar S^® comes with airline and Euro male connection, you will need a Euro quick release coupling 1/4inch for your compressor.When you purchase a Bambi Compressor with Ministar S^® from Eurodontic save 5% and receive free installation.

Important

A manufacturer of medical devices must register with the MHRA  (Medicines and Health Regulatory Agency) and must understand and comply with (MDR) Medical Device Regulations. ​

The regulations stipulate that appliances must be manufactured with acceptable materials and must be signed off by a GDC-registered person. ​

A manufacturing organisation requires a responsible person who is two years post-qualification and is competent in the area of appliance manufacture.

MINISTAR_S

Ministar_Biostar_Application_manual

Trouble Shooting Biostar & Ministar

https://scheu-dental.com/en

The post SCHEU-DENTAL MINISTAR S® appeared first on Eurodontic.

Applications – occlusal splints and retainers.

For best results use with Isofolan spacer foil.

DURAN_Instructions

Ministar_Biostar_Application_manual.pdf (eurodontic.co.uk)

Datasheet-DURAN

The post Duran® appeared first on Eurodontic.

Scheu-Dental Biostar ®

Versatile pressure moulding machine for all applications in dental pressure moulding and orthodontics, equipped with scan technology and 6.0 bar working pressure, adjustable by pressure reducing valve on the unit. The unique thermally controlled infrared heater reaches working temperature in one second. All parameters such as temperature, heating and cooling times are programmed by reading the scanner or entering the corresponding code. The coloured 3.2″ LCD display with a resolution of 320 x 240 pixel leads you through the single working steps of the pressure moulding process, providing further information on scanned material, its indication as well as a library with illustrated application hints for fabrication. Rear port for easy updates. Large model cup facilitates embedding of mounted models. Pellet container ensures optimum dispensing and storing of pellets.

A compressor is required to operate the Ministar

Trouble Shooting Biostar & Ministar

Scheu-Dental Thermoforming Materials

https://scheu-dental.com/en

The post SCHEU-DENTAL BIOSTAR® appeared first on Eurodontic.

Applications – occlusal splints and retainers.

https://schttps://www.eurodontic.co.uk/product-category/pressure-moulding/materials-accessories/

https://scheu-dental.com/en 

Ministar_Biostar_Application_manual.pdf (eurodontic.co.uk)

DURAN+_Instructions

Datasheet-DURAN_plus

Description: DURAN®+ is a clear-transparent, tough and abrasion-resistant PET-G thermoforming material with outstanding properties in terms of breaking strength, elasticity and dimensional stability. DURAN®+ belongs to the family of polyester resins, combining extremely low water absorption and highest biocompatibility (it does not require pre-drying).
The material has been tested and approved in terms of cell biology.
Indication: is ideally suited for all indications in prosthetic and orthodontic splint therapy, such as Miniplast splints,
occlusal splints with and without adjustments, CMD splints, retention splints, Essix retainer and palatal expansion.
As hard-elastic splint material, DURAN®+ is predestined for tooth transpositions, fine corrections and retentions in
splint therapy.

Pessure moulding: Full models should be embedded in the pellets and dental arcade models should be placed on the model platform.
As you can see from the imprint directly on the material or on the packaging labels, the heating times for DURAN®+ are
extremely short. The initial thickness of DURAN®+ will be reduced slightly depending on the model height. Make sure
to remove the integrated protection foil after taking off the splint from the model and prior to inserting it.
Finishing: Up to a thickness of 1.0 mm, DURAN®+ can be easily trimmed with SD-Foil scissors A (REF 3460). For thicknesses exceeding 1.0 mm, we recommend using the finishing set (REF 3378). Final trimming and polishing can be most effectively done with DIMO / DIMO® PRO discs (REF 3380-3384/3376). Compound and adjustment with cold cure resins such as
DURASPLINT® are possible without any problems. For most C+B and/or temporary materials – especially bis-acrylic
composites – the use of a bonding agent is recommended. Make sure to check the suitability of the corresponding
bonding agent prior to using it.
Cleaning/care: Products from the CETRON® range are the best choice for daily cleaning and care. Detergents or products on the base
of alcohol or plants (e.g. Pyralvex®) as well as hot water or steam jets should not be used.
Note: Heating times of less than 20 seconds can not be coded in BIOSTAR® devices. In these cases, the heating time must
be entered manually using the key with the „clock symbol“.
Storage: Protect from sunlight. Store in a dry place.

The post Duran® + 125mm rd (with insulation foil attached) appeared first on Eurodontic.

BLUE-BLOKKER ®

SCHEU-DENTAL Light-curing, blue transparent blocking out and modelling material. For fabrication of space maintainers for bleaching splints and medical trays, and sealing saw cuts in set-up models. Can also be used in prosthetics. Curing in wavelength range of 380-470nm. 4×1.5g.

BLUE-BLOKKER® is applied directly from the dosing syringe and can be easily combined with conventional waxes. Light-hardened BLUE-BLOKKER® outdoor telescopes are stable and can be lifted off without tension. BLUE-BLOKKER® also burns at large layer thicknesses, residue-free. The casting results are absolutely dimensionally stable with excellent fit accuracy.
The thixotropic adjustment of the material as well as the micro- and Mini cannulas facilitate the targeted dosing and application of the
Material. Curing is carried out using commercially available UV lamps in the spectral range of 380-470 nm. Depending on the material order and Lamp type hardens BLUE-BLOKKER® in 10-30 sec.

– Sealing saw cuts and blocking teeth and teeth segments after adjustment in the set-up technique.

– Precise application of the gel reservoir – (depending on the bleaching
system) – in accurately defined thickness for bleaching and fluorisation splints and medical trays.

– Blocking out cervical margins, gaps, and strongly divergent teeth as
well as fixing wire elements when fabricating hard elastic splints.

– Applying BLUE-BLOKKER ® directly out of the dosing tip. BLUEBLOKKER ® can be very well combined with conventional waxes.
Light-cured BLUE-BLOKKER ® outer telescopes will be very stable
and can be removed easily without tension. Even when working with
higher thicknesses, BLUE-BLOKKER ® will burn without residues. The
results will show high dimensional stability and perfect fitting.

– The ideal viscosity and the micro and mini cannula allow precise application of the material. Curing with standard UV light in the spectral
range of 380-470 nm. Depending on material quantity and type of
light, BLUE-BLOKKER ® cures within 10-30 seconds.

BLUE-BLOKKER_VKP_0189_GB_Original_3366

https://scheu-dental.com/en

The post BLUE-BLOKKER ® appeared first on Eurodontic.

The BRUX CHECKER® foil registers occlusal interferences like bruxism through abrasion on the foil surface. The foil is moulded over a hard plaster model and worn for at least one night by the patient. The evaluation of this parafunctional grinding pattern allows the clinician to draw conclusions on possible causes of the disorder and to choose the appropriate treatment.

BRUX_CHECKER_BRO_0307_GB_Original_3028

BRUX_CHECKER_Sato_ATLAS_Occlusion_Diagnosis_07_13_GB_Original_5505

https://www.scheu-dental.com/en

Patient information
Your dentist has given you one or more BRUX CHECKER® foils, which
were shaped on a model of your teeth. The foil has a biocompatible colour
coating on one side, which will be abraded at the contact points between
your upper and lower teeth while you are wearing it. The resulting pattern
enables your dentist to identify any tooth and jaw misalignments.
In order to obtain a meaningful result, please observe the following:
• Make sure not to use any mouthwash containing alcohol, as this might
dissolve the lacquer coat of the splint and lead to a discoloration of the
tongue.
• The foil will be worn during sleep in the night.
• Carefully press the foil on your upper and lower jaw, first in the area of
the front teeth and then in the area of the molars.
• Please proceed in reverse order in the morning: Remove the foil using
your finger nails first in the area of the molars and then in the area of
the front teeth.
• Rinse the foil under lukewarm water and let it dry. Then put the foil again
over the plaster model, in order to avoid deformation.
• Each foil is for use during one night only.
• Please avoid alcohol and medication like sleeping pills, as this may lead
to a non-typical grinding pattern.
• Once you returned the model and the foil to your dentist, he will consult
you on the next measures to take.

The post BRUX CHECKER® appeared first on Eurodontic.

Use with Durasoft Seal to prevent discolouring.

PK 10 or PK 100 Durasoft® PD

• hard/soft ratio:
• 1.2 x 125 mm: 0.7 mm/0.5 mm
• 1.8 x 125 mm: 0.9 mm/0.9 mm
• 2.5 x 125 mm: 1.6 mm/0.9 mm
• 3.0 x 125 mm: 2.1 mm/0.9 mm
• 4.0 x 125 mm: 3.1 mm/0.9 mm

Patient Splint care

4391912_DURASOFT_pd_BPZ_0117_GB

4391528_Datasheet-DURASOFT_from-LOT-1714

https://www.scheu-dental.com/en

The post Durasoft® PD appeared first on Eurodontic.

DURASPLINT® LC  Light-curing, transparent resin, specifically designed for the adjustment of DURAN® splints with a minimal thickness of 1.5mm. Doesn’t require curing in an autoclave. For polymerisation, we recommend using the LC 6 Light Oven, with pre-set polymerisation times of 5 or 10 mins. Curing in the wavelength of 350-450nm. Prior to processing, LC Primer has to be applied to DURAN® splints. No yellow discolouration of material after light curing.

Pack includes 3 bars (38g).

Indications  anterior bite planes, Michigan Tanner, B-splits

DURASPLINT_LC_Instructions

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

https://www.scheu-dental.com/en 

The post DURASPLINT® LC appeared first on Eurodontic.

The post BIOPLAST® Colour appeared first on Eurodontic.