Applications – mouthguards, bruxism splints, (bleaching trays 2 mm or more- recommend Bioplast Bleach product code 3190 if you require 1mm which is firmer than Bioplast 1 mm)

Description: BIOPLAST® is a soft elastic rubber-like thermoforming material made of ethylene vinyl acetate (EVA) that does not bond
to acrylic. BIOPLAST® has been tested and approved for its biological safety.

Indication: Duplicating moulds for plaster situation models, mouth guard, bruxism splints, positioner, OSAMU-Retainer®.

Model Preparation: If necessary, block out strong undercuts using BLUE-BLOKKER® before pressurizing. For model insulation we recommend BIOPLAST® insulating agent (REF 3189/3166). Apply one layer of the insulating agent to the model, making sure
to prevent the liquid from accumulating in the cavities as well as from drying out.

Pressure Moulding: We recommend to place dental arcade models on the model platform and to embed full models in the pellets. Adhesion
of pellets to the model and the resulting loss of pellets can be considerably reduced by using the pellet cover (REF 3006
large/REF 3007 small).

Finishing: You can reduce the splint to its final extension using SD foil scissors A (REF 3460) or B (REF 3461). The BIOPERM
trimmer (REF 3226), DIMO®PRO (REF 3381), DIMO®PRO SLIM (REF 3376) and POLYFIX (REF 3371) are best suited for
finishing. Best polishing results are achieved using the OSAMU polisher (REF 3247) at 5000 – 10000 rpm.

Cleansing/care: Our CETRON® cleansing and care products are the best choice for splints made of BIOPLAST®.

Storage: Protect from sunlight. Store in a dry place.

Safety note: To be used only for the above indication and by qualified personnel. For single use. Serious incidents in connection with the
use of the product must be reported immediately to the manufacturer and the competent authority!

BIOPLAST_VKP_0373_GB_Original_3288

https://scheu-dental.com/en

The post Bioplast® appeared first on Eurodontic.