Applications – occlusal splints and retainers.

https://schttps://www.eurodontic.co.uk/product-category/pressure-moulding/materials-accessories/

https://scheu-dental.com/en 

Ministar_Biostar_Application_manual.pdf (eurodontic.co.uk)

DURAN+_Instructions

Datasheet-DURAN_plus

Description: DURAN®+ is a clear-transparent, tough and abrasion-resistant PET-G thermoforming material with outstanding properties in terms of breaking strength, elasticity and dimensional stability. DURAN®+ belongs to the family of polyester resins, combining extremely low water absorption and highest biocompatibility (it does not require pre-drying).
The material has been tested and approved in terms of cell biology.
Indication: is ideally suited for all indications in prosthetic and orthodontic splint therapy, such as Miniplast splints,
occlusal splints with and without adjustments, CMD splints, retention splints, Essix retainer and palatal expansion.
As hard-elastic splint material, DURAN®+ is predestined for tooth transpositions, fine corrections and retentions in
splint therapy.

Pessure moulding: Full models should be embedded in the pellets and dental arcade models should be placed on the model platform.
As you can see from the imprint directly on the material or on the packaging labels, the heating times for DURAN®+ are
extremely short. The initial thickness of DURAN®+ will be reduced slightly depending on the model height. Make sure
to remove the integrated protection foil after taking off the splint from the model and prior to inserting it.
Finishing: Up to a thickness of 1.0 mm, DURAN®+ can be easily trimmed with SD-Foil scissors A (REF 3460). For thicknesses exceeding 1.0 mm, we recommend using the finishing set (REF 3378). Final trimming and polishing can be most effectively done with DIMO / DIMO® PRO discs (REF 3380-3384/3376). Compound and adjustment with cold cure resins such as
DURASPLINT® are possible without any problems. For most C+B and/or temporary materials – especially bis-acrylic
composites – the use of a bonding agent is recommended. Make sure to check the suitability of the corresponding
bonding agent prior to using it.
Cleaning/care: Products from the CETRON® range are the best choice for daily cleaning and care. Detergents or products on the base
of alcohol or plants (e.g. Pyralvex®) as well as hot water or steam jets should not be used.
Note: Heating times of less than 20 seconds can not be coded in BIOSTAR® devices. In these cases, the heating time must
be entered manually using the key with the „clock symbol“.
Storage: Protect from sunlight. Store in a dry place.

The post Duran® + 125mm rd (with insulation foil attached) appeared first on Eurodontic.

UNIQ pd

The ideal solution for every aligner treatment.
Scheu-Dental innovative thermoforming sheet sets new standards for greater efficiency and comfort during aligner treatment. With just one layer, the UNIQ achieves what many multilayer foils cannot achieve. With its single layer material, it permanently withstands forces
during the entire treatment. The result? A pleasant wearing comfort with gentle initial forces and constant restoring forces. With UNIQ, we have developed a foil that achieves maximum benefits in every aligner treatment with just one layer!

Innovative
With just one layer, UNIQ offers outstanding material properties and also stands out from other aligner foils with its wide range of thicknesses. This makes it a versatile and attractive option for orthodontists and patients.

Long-term elasticity
With UNIQ pd , we achieve remarkably high elasticity while guaranteeing consistently good performance throughout the entire aligner treatment. This performance is achieved with just a single layer – a benchmark that many cannot even achieve with multiple layers.

Comfortable
Reduced initial forces and constant restoring forces not only ensure a gentle wearing sensation, but also smooth planning during the entire aligner treatment with UNIQ.

Reliable
The single layer material of the UNIQ makes post-processing considerably easier compared to multilayer foils. Fewer breaks can also ensure a smooth clinical procedure.

Sustainable
Compared to multilayer foils, UNIQ requires significantly less energy during production, which not only protects the environment in the long term, but is also much more cost-efficient. The surplus material from production is also recyclable and can be reused.

Conventional single layer aligner materials typically have a high initial force, which quickly decreases during the course of treatment. In comparison,
UNIQ exerts less pressure due to its improved material properties, but maintains this pressure over a longer period of time. The initial force of the
aligner is lower and the force level remains constant during treatment. For the patient, this means smoother and more effective movement of the
teeth with greater comfort.

https://scheu-dental.com/en 

The post UNIQ pd appeared first on Eurodontic.