Special orthodontic acrylic for attaching clasp arms and relining expansion screws when pressure-moulding retention and expansion plates using BIOCRYL^® C. Material polymerises during the cooling phase in the pressure moulding unit. No need for time-consuming polymerisation in pressure pot.  BIOCRYL®-RESIN Monomer or Polymer ARE sold separately please select from drop down box.

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

https://www.scheu-dental.com/en 

The post BIOCRYL®-RESIN Monomer or Polymer appeared first on Eurodontic.

Application – Immediate dentures, orthodontic plates and retainers

Properties: BIOCRYL® C is a break-resistant acrylic material of pure PMMA. The material is monomer-free, without allergenic
irritants and bonds to acrylic. All availaible material thicknesses are already pre-dried ex works and vacuum-packed
in a foil bag for immediate use. The material has been tested and approved for its biological safety.
Indications: BIOCRYL® C is only suitable for the fabrication of immediate/interim dentures and orthodontic retainers and expanders.
Contraindication: Allergic reactions to components of BIOCRYL® C (PMMA) cannot be ruled out in sensitised people. Any use not stated
above is contraindicated.
Model Preparation: Larger areas, as for example the sublingual area, should be protected with blocking out putty (REF 3220). Smaller
undercuts can be blocked out using SIL-KITT (REF red 3442/REF 3443 transparent). ISOFOLAN® foil (REF 3207) is
recommended for isolation, providing at the same time optimum transparency and an aesthetically smooth inner side of the splint that can be easily cleaned. Depending on the application, clasps and screws – if required –
are fixed on the vestibular side with sticky wax. In case of preparing immediate dentures, the silicone matrix with the
prepared teeth must be fixed, too.
Pressure moulding: Embed the vestibular model parts up to the occlusal surfaces into the pellets. Mix BIOCRYL®-RESIN and apply it to
the retentions or under the teeth in the last 20 – 30 seconds of the heating time. For complete polymerization, the
cooling phase should be at least 300 seconds.
Finishing: The cutting bur (REF 3214) is best suited for initial finishing. The clasps and the labial arch can be exposed using
the finishing bur (REF 3377), made of a special soft alloy that will not damage the wire elements. The saw cut for the
expansion screw is done with the set-up manual saw (REF 5372) or the diamond separating disc (REF 5288).
For trimming and smoothing we recommend using DIMO® brown (REF 3382) and DIMO® green (REF 3383).
Cleansing/care: Our CETRON® cleansing and care products are the best choice for orthodontic plates made of BIOCRYL® C.
More detailed information on the various applications can be found on www.scheu-dental.com/en/download.
Note: After opening, must be used within 15 minutes, and only by qualified personnel. Only open undamaged, sealed barrier
bags.
For single use.
Serious incidents in relation to the use of the device must be reported to the manufacturer and the competent authority
immediately!

The post BIOCRYL® C appeared first on Eurodontic.