Keyprint® Keysplint Soft™  is fully biocompatible, and is in compliance with international medical device regulations and standards. Its robust formulation has three years of guaranteed shelf life, is color stable, and is validated in multiple open-source printers. No other dental splint resin can deliver the quality and performance of KeySplint Soft.

• Biocompatible
• Transparent
• Polishable
• Stain-resistant

Keysplint-Soft_Polishing Instructions

KeySplint-Soft-TDS-physical-properties

Keysplint Soft™

KeySplint Soft is fully biocompatible, and is in compliance with international medical device regulations and standards. Its robust formulation has three years of guaranteed shelf life, is color stable, and is validated in multiple open-source printers. No other dental splint resin can deliver the quality and performance of KeySplint Soft.

Biocompatible
Transparent
Polishable
Stain-resistant
INDEPENDENT STUDY ON WEAR EXPECTATIONS
KEYSPLINT SOFT IN IDT
DOCTOR TESTIMONIALS
Utilizing unique patent-pending technologies, Keystone Industries has developed a one-of-a-kind 3D printing resin for the fabrication of flexible dental splints, nightguards, and bleaching trays. This DLP-optimized resin is an exceptional printing material, that combines the strength needed to protect teeth against disorders like bruxism with added flexibility for better patient comfort. KeySplint Soft is also easily cleaned by the patient.
Within the USA, KeyPrint® KeySplint Soft® is indicated for the fabrication of orthodontic and dental appliances such as mouthguards, nightguards, splints, repositioners, and bleaching trays.

Outside the USA, KeyPrint® KeySplint Soft® is indicated for the fabrication of orthodontic and dental appliances such as bite planes, mouthguards, nightguards, snoring appliances, splints, and repositioners.

https://www.eurodontic.co.uk/?s=keyprint&post_type=product&wps-title=1&wps-excerpt=1&wps-content=1&wps-categories=1&wps-attributes=1&wps-tags=1&wps-sku=1&ixwps=1

https://keyprint.keystoneindustries.com/keysplint-soft/

PROPERTIES METHOD

Ultimate Flexural Strength ISO 20795-2 2.6–4.4 MPa
Flexural Modulus ASTM D790 1356 MPa
Tensile Strength ASTM D638 52 MPa
Young’s Modulus Tensile ASTM D638 1790 MPa
Water Sorption ISO 20795-2 < 18 μg/mm3
Elongation at Break ASTM D638 110%
Biocompatability Pass ISO 10993-1

Utilizing unique technologies, Keystone Industries has developed a one-of-akind 3D printing resin for the fabrication of flexible, durable dental splints and
nightguards. This DLP-optimized resin is an exceptional printing material that
combines the strength needed to protect teeth against disorders like bruxism,
with added flexibility for better patient comfort.

The post Keyprint® Keysplint Soft™ appeared first on Eurodontic.

We offer free CPD training and support to our customers, as well as offering a machine repair and loan service.

For machine purchases, we ask for a 70% deposit via BACS. We will contact you to arrange this once you place the order.

The compact Scheu Ministar device  is equipped with advanced scanning technology. The scanner reads the coded material, allowing programming of all important parameters such as heating time, temperature and cooling time.

A compressor is required to operate the Ministar. 

In other words, ultra precise pressure moulding results are achieved in record time, thanks to the rapid, patented heater and working pressure of 4.0 bar, adjustable via pressure regulator. The new generation machines are equipped with user-friendly membrane keypad and large display. All operating parameters are monitored and indicated on the display.

Technical data

• • Power: 230/115/100 V, 750 W
  • Working pressure: 0.5 – 4.0 bar
  • Dimensions (W × H × D): 500 × 210 × 400 mm
  • Weight: 9 kgs
  • 3 years warranty, 10 years availability of spare parts
• • . compressor is recommended with an output greater than 4 bars of pressure,  The Ministar S^® comes with airline and Euro male connection, you will need a Euro quick release coupling 1/4inch for your compressor.When you purchase a Bambi Compressor with Ministar S^® from Eurodontic save 5% and receive free installation.

Important

A manufacturer of medical devices must register with the MHRA  (Medicines and Health Regulatory Agency) and must understand and comply with (MDR) Medical Device Regulations. ​

The regulations stipulate that appliances must be manufactured with acceptable materials and must be signed off by a GDC-registered person. ​

A manufacturing organisation requires a responsible person who is two years post-qualification and is competent in the area of appliance manufacture.

MINISTAR_S

Ministar_Biostar_Application_manual

Trouble Shooting Biostar & Ministar

https://scheu-dental.com/en

The post SCHEU-DENTAL MINISTAR S® appeared first on Eurodontic.

Applications – mouthguards, bruxism splints, (bleaching trays 2 mm or more- recommend Bioplast Bleach product code 3190 if you require 1mm which is firmer than Bioplast 1 mm)

Description: BIOPLAST® is a soft elastic rubber-like thermoforming material made of ethylene vinyl acetate (EVA) that does not bond
to acrylic. BIOPLAST® has been tested and approved for its biological safety.

Indication: Duplicating moulds for plaster situation models, mouth guard, bruxism splints, positioner, OSAMU-Retainer®.

Model Preparation: If necessary, block out strong undercuts using BLUE-BLOKKER® before pressurizing. For model insulation we recommend BIOPLAST® insulating agent (REF 3189/3166). Apply one layer of the insulating agent to the model, making sure
to prevent the liquid from accumulating in the cavities as well as from drying out.

Pressure Moulding: We recommend to place dental arcade models on the model platform and to embed full models in the pellets. Adhesion
of pellets to the model and the resulting loss of pellets can be considerably reduced by using the pellet cover (REF 3006
large/REF 3007 small).

Finishing: You can reduce the splint to its final extension using SD foil scissors A (REF 3460) or B (REF 3461). The BIOPERM
trimmer (REF 3226), DIMO®PRO (REF 3381), DIMO®PRO SLIM (REF 3376) and POLYFIX (REF 3371) are best suited for
finishing. Best polishing results are achieved using the OSAMU polisher (REF 3247) at 5000 – 10000 rpm.

Cleansing/care: Our CETRON® cleansing and care products are the best choice for splints made of BIOPLAST®.

Storage: Protect from sunlight. Store in a dry place.

Safety note: To be used only for the above indication and by qualified personnel. For single use. Serious incidents in connection with the
use of the product must be reported immediately to the manufacturer and the competent authority!

BIOPLAST_VKP_0373_GB_Original_3288

https://scheu-dental.com/en

The post Bioplast® appeared first on Eurodontic.

SCHEU-DENTAL  Bioplast® Bleach Soft,

Bioplast® Bleach pliable, rubber-like, transparent material. Does not bond to acrylic.

Applications –  bleach -trays-for-teeth-whitening use with Bioplast insulating agent

4391502_Datasheet-BIOPLAST-bleach 4392990_BIOPLAST_bleach_BPZ_PM0249_DE_GB_FR_ES

4392990_BIOPLAST_bleach_BPZ_PM0249_DE_GB_FR_ES

https://scheu-dental.com/en

https://www.scheu-dental.com/en

Description: BIOPLAST® bleach is a soft elastic rubber-like thermoforming material made of ethylene vinyl acetate (EVA) that
does not bond to acrylic. The material does not require predrying before pressure moulding, as it is not hygroscopic.
The material has been tested and approved for its biological safety.

Indication: Due to its material characteristics, BIOPLAST® bleach is ideally suited for  bleach trays for teeth whitening and medical trays. The material has a higher degree of stability than the standard BIOPLAST® material, ensuring a more precise marginal adaptation.

Contraindication: Allergic reactions to components of BIOPLAST® bleach (EVA) cannot be ruled out in sensitized people. Any use not
stated above is contraindicated.

Preparing the model: Apply BLUE-BLOKKER® that serves as a space holder in the required layer thickness to the surfaces that you want to
bleach or treat. We recommend using BIOPLASTIC® insulating agent (REF 3189/3166) for model isolation. Apply one
thin layer of the insulating agent to the model, making sure to prevent the liquid from accumulating in the cavities as
well as from drying out.

Pressure moulding: Generally speaking, we recommend to place dental arches on the model and to embed full models into the pellets.
Adhesion of pellets to the model and the resulting loss of pellets can be considerably reduced by using the pellet cover
(REF 3006 large/REF 3007 small).

Finishing: You can reduce the splint to its final extension using the foil scissors A (REF 3460) and DIMO® PRO SLIM (REF 3376).

Cleansing/care: Our CETRON® cleansing and care products are the best choice for  bleach trays for teeth whitening made of BIOPLAST® bleach.

Note: The product must only be used for the indication specified above and by qualified personnel. For single use. Any serious

The post Bioplast® Bleach appeared first on Eurodontic.