CHAIRSIDE RESTORATIONS HAVE NEVER BEEN
                            SMART AND SIMPLE

SprintRay Midas is the ultimate chairside restoration solution. It uses patented Digital Press Stereolithography (DPS) technology and an innovative capsule system to make producing crowns, inlays, onlays and veneers as easy as using your coffee machine. When you buy Midas, you’ll unlock access to AI Studio and unlimited AI designs for one year.

• Fast – print up to 3 full-contour crowns, 6 inlays/onlays or 9 veneers in less than 10 minutes
• Easy to use – £8,500.00 Midas guides users intuitively from scan upload to design and fabrication. It’s easy to use, clean and maintain.
• Revolutionary – patented DPS and capsule technology allow Midas to print without viscosity limitations, including highly filled composites for future biomaterial innovation.

SprintRay Midas Features

3D Printing Technology

Viscosity-agnostic Digital Press Stereolithography (DPS)
Continuous pressurized printing system
Advanced cure depth control

Resin Curing Unit

385 nm UV-A LED
SprintRay custom-built UV projector
Factory calibrated for light uniformity and intensity

Minimum Feature Size

45 µm (XY Resolution)

Print Speed

Print up to 3 capsules in less than 10 minutes

Print Glass

Heated glass printing surface
3-capsule max capacity
Removable print template
Easy to clean with IPA and glass cleaner

Resin Capsule

Print Volume (Per capsule)
15 mm diameter
20 mm height
Resin Volume (Per capsule)
4 mL of resin

Connectivity

2.4 and 5 GHz Wi-Fi chipset
Local network via Wi-Fi b/g/n
Local network via Ethernet cable

User Controls

7” glass touchscreen
Direct print via front-facing USB-C port
Android-based PrintOS onboard software
8-core onboard computer

Power Requirement

100-240V, 50-60Hz, 140 watts
Operating Temperature Range 70 – 85°F (21 – 29°C)
Unit Dimensions
(W x D x H)
8 x 8 x 14.5 in.
20 x 20 x 37 cm

Shipping Dimensions & Weight

13 x 18.5 x 14 in.
33 x 47 x 35.5 cm
24 lb.
11 kg

https://www.eurodontic.co.uk/product-category/cad-cam/sprintray/

https://sprintray.com/en-uk/?mtm_campaign=Sprintray%20UK&gad_source=1&gclid=Cj0KCQiA_NC9BhCkARIsABSnSTa06wyG2wptVjTVTgDqtqSBAY_sfNXpinram8Tn4L_EHM88ULmGI6waAnzvEALw_wcB 

The post SprintRay Midas appeared first on Eurodontic.

SprintRay-CrownDesignGuidelines-V3

The post SprintRay Crown Resin appeared first on Eurodontic.

Introducing SprintRay OnX Tough 2, a groundbreaking dental 3D printing resin for use in creating fixed hybrid dentures. This resin leverages the cutting-edge NanoFusion™ technology, which set a new industry
standard by offering exceptional durability and visual quality.

The result is a remarkably natural appearance that closely resembles natural enamel.
OnX Tough 2 empowers dental professionals to fabricate fixed hybrids
chairside while rivaling milled PMMA material qualities – all without extra
mixing or rolling. OnX Tough 2 ensures unmatched strength and
high-quality aesthetics, streamlining the process for increased efficiency
and fewer appointments.
500g bottles available now in: A1, A2, B1, Bleach and Hollywood White.

Full Arch Implant Rehabilitation
Rehabilitation of full arch edentulous patients was the primary reason and indication
for dental implants back in 1977 when Branemark introduced the osseointegration
process and endosseous dental implants.
Rehabilitation of patients with the need for full arch implant supported prosthesis
(often called hybrid prosthesis) has been growing rapidly among dental practitioners
and is demanded by many patients nationwide.
1
This treatment enables restoration of
function and aesthetics in very reasonable timeframes. The current trend in implant
rehabilitations is to develop materials to improve the aesthetics and mechanical
properties, reduce treatment time, and ultimately simplify treatment procedures.2
Conventional Methods of Hybrid Denture Fabrication
Conventionally, the provisional prosthesis delivered to patients during the healing
period would be fabricated by connecting temporary cylinders to a premade
PMMA based prosthesis. This procedure, which is performed either on the day of
surgery in case of immediate loading, or at a later time when the implants are fully
osseointegrated. In case of delayed loading, it is time consuming and can cause
discomfort for patients. However, introduction of CAD/CAM in dentistry and
improvements in digital dentistry workflows has enabled clinicians to reduce the
postoperative complications, improve the patient satisfaction, and provide more
predictable treatment outcome.
3
To date, the search for optimum material is
ongoing and constant research and innovation has created very unique materials
applicable for full arch implant rehabilitations.

Flexural Strength and Flexural Modulus
Objective
This study evaluated the flexural strength and flexural modulus of the samples
printed with available dental 3D printing hybrid denture materials in the market.
This study provides a valuable insight into the mechanical properties of these
3D printed resins.
Materials and Methods
For this evaluation, bars with 4 mm thickness, 12.7 mm width, and 125 mm length
were fabricated according to the ASTM D790. For this test the support span was
set at 64 mm. Moreover, bars with 2 mm thickness, 2 mm width, and 25 mm length
dimensions were fabricated according to the ISO 4049 standard. For this test the
support span was set at 20 mm. The materials printed for this study were OnX Tough
2 (SprintRay), Flexcera Smile Ultra Plus (Desktop Health), Rodin Sculpture (Pac-Dent),
and Trusana (Myerson). All samples were printed and cured according to the
manufacturer’s IFU.

https://sprintray.com/en-uk/?mtm_campaign=Sprintray%20UK&gad_source=1&gclid=Cj0KCQiA_NC9BhCkARIsABSnSTa06wyG2wptVjTVTgDqtqSBAY_sfNXpinram8Tn4L_EHM88ULmGI6waAnzvEALw_wcB 

The post OnX Tough 2 appeared first on Eurodontic.

• The Crown Kit consists of a compact build platform and a specialized tank, allowing less material use and fast printing of up to 6 crowns in under 15 minutes.
• The Crown Kit is compatible with our SprintRay Crown resin, allowing a workflow from data acquisition to patient delivery in 45 minutes – making this the first real 3D printing Chairside solution in the world.
• AI Crown Design Services in Europe. With artificial intelligence, customers simply need to upload their scan in order to receive a ready-to-print STL file of a posterior crown within a few minutes. This makes the workflow even more frictionless. Sprintray, already serve all customers who design themselves.

The SprintRay Pro S Crown Kit is the first 3D printing solution designed specifically to fabricate ceramic restorations. With the Crown Kit, you can produce up to 6 single unit crowns in 10 minutes, all while reducing resin waste. In this bundle:

– SprintRay Crown Build Platform
A new, compact build platform with a hard anodized aluminum surface and powerful onboard heater. Its 1.5” x 2” build area can fit up to 6 single unit crowns.

– SprintRay Crown Resin Tank
With a 50mL capacity, the compact tank uses resin efficiently and heats up rapidly. Works with the Pro S to track resin usage and lifetime, expected up to 15 liters.

A new, compact resin tank for SprintRay Pro S printers designed for 3D printing ceramic crowns. Features a 50mL capacity for efficient resin usage and rapid heat transfer. Works in tandem with the Pro S printer to track resin usage and tank lifetime. The Crown Kit Resin Tank has an expected life of up to 15 liters of resin. Must be used with the Crown Kit Build Platform .

• Biocompatible, FDA 510(k) cleared and fulfills all the requirements for a Class II medical device
• Versatile: use as a single crown on natural tooth or abutment, as an inlay, onlay or veneer
• Very low water absorption reduces the tendency to age while a smooth surface means low plaque accumulation

Final-003-EU-ENG-CERAMIC CROWN KIT-Brochure_View_

https://sprintray.com/en-uk/indications/ 

https://www.eurodontic.co.uk/product/sprintray-crown/

Crowns & Bridges

The post SprintRay Crown Kit appeared first on Eurodontic.