Applications – occlusal splints and retainers.

For best results use with Isofolan spacer foil.

DURAN_Instructions

Ministar_Biostar_Application_manual.pdf (eurodontic.co.uk)

Datasheet-DURAN

The post Duran® appeared first on Eurodontic.

Applications – occlusal splints and retainers.

https://schttps://www.eurodontic.co.uk/product-category/pressure-moulding/materials-accessories/

https://scheu-dental.com/en 

Ministar_Biostar_Application_manual.pdf (eurodontic.co.uk)

DURAN+_Instructions

Datasheet-DURAN_plus

Description: DURAN®+ is a clear-transparent, tough and abrasion-resistant PET-G thermoforming material with outstanding properties in terms of breaking strength, elasticity and dimensional stability. DURAN®+ belongs to the family of polyester resins, combining extremely low water absorption and highest biocompatibility (it does not require pre-drying).
The material has been tested and approved in terms of cell biology.
Indication: is ideally suited for all indications in prosthetic and orthodontic splint therapy, such as Miniplast splints,
occlusal splints with and without adjustments, CMD splints, retention splints, Essix retainer and palatal expansion.
As hard-elastic splint material, DURAN®+ is predestined for tooth transpositions, fine corrections and retentions in
splint therapy.

Pessure moulding: Full models should be embedded in the pellets and dental arcade models should be placed on the model platform.
As you can see from the imprint directly on the material or on the packaging labels, the heating times for DURAN®+ are
extremely short. The initial thickness of DURAN®+ will be reduced slightly depending on the model height. Make sure
to remove the integrated protection foil after taking off the splint from the model and prior to inserting it.
Finishing: Up to a thickness of 1.0 mm, DURAN®+ can be easily trimmed with SD-Foil scissors A (REF 3460). For thicknesses exceeding 1.0 mm, we recommend using the finishing set (REF 3378). Final trimming and polishing can be most effectively done with DIMO / DIMO® PRO discs (REF 3380-3384/3376). Compound and adjustment with cold cure resins such as
DURASPLINT® are possible without any problems. For most C+B and/or temporary materials – especially bis-acrylic
composites – the use of a bonding agent is recommended. Make sure to check the suitability of the corresponding
bonding agent prior to using it.
Cleaning/care: Products from the CETRON® range are the best choice for daily cleaning and care. Detergents or products on the base
of alcohol or plants (e.g. Pyralvex®) as well as hot water or steam jets should not be used.
Note: Heating times of less than 20 seconds can not be coded in BIOSTAR® devices. In these cases, the heating time must
be entered manually using the key with the „clock symbol“.
Storage: Protect from sunlight. Store in a dry place.

The post Duran® + 125mm rd (with insulation foil attached) appeared first on Eurodontic.

Also available in 0.1x 120mm (100) NOT FORR MINISTAR

Ministar_Biostar_Application_manual

Datasheet-ISOFOLAN

https://www.scheu-dental.com/en

The post Isofolan® appeared first on Eurodontic.

Applications – occlusal splints and retainers.

Datasheet-DURAN

SCHEU DENTAL

Our values

About us

In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

https://scheu-academy.com/

The post Duran® Square appeared first on Eurodontic.

Important: If you are making custom made dental appliances you must be registered with MHRA www.gov.uk/government/publications/custom-made-medical-devices/custom-made-devices-in-great-britain

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

As a manufacturer of medical devices, we also bear a special responsibility. That is why we comply with the requirements of the EU Medical Device Regulation 2017/745 (MDR) with the utmost care. Our products stand for the highest standards of quality, safety and performance – confirmed by our MDR certification.

https://www.scheu-dental.com/en

https://www.eurodontic.co.uk/

The post Fabrication of a retainer splint appeared first on Eurodontic.