Water-based, blue transparent gel for insulation when fabricating removable orthodontic appliances on 3D printed models. Optimal insulating effect using IMPRIMO® LC resins and STEADY-RESIN autopolymerisates. Apply a thin layer with appropriate brush and let it dry properly. Not suitable for 3D models generated by a filament printer!

Available as 100 ml pump bottle with brush or as 500 ml refill bottle. Download the STL file to print yourself a rack for both pump bottle and brush.

No hazardous material in terms of transport regulations.

(brush comes with the 100ml bottle and is not sold separately)

Processing/application:

Once the position for the expansion screw has been marked, mill a recess for the screw spacer. Bend the wire elements. Block out undercuts using thermal wax. Apply the IMPRIMO® Model Separator from the pump bottle, distribute it evenly with the enclosed brush and allow to dry well.
The use of the LC-6 Light Oven is recommended to shorten the drying time. Fix the expansion screw(s) and wire elements as usual with adhesive wax on the dry and insulated resin model. Process resin following the instructions for the orthodontic technique. Once the resin has polymerised, carefully lift the orthodontic plate from the 3D model using a plaster knife. Rinse model and expansion plate under running water.

Remove wax residues using steam jet. Finish and polish the expansion plate conventionally

Light wavelength 350nm and 450nm

IMPRIMO_Model_Separator_PM0319_GB_Original_10222

IMPRIMO® Model Separator – application video — Eurodontic

www.scheu-dental.com/fileadmin/SCHEU-DENTAL/Downloads/10_Support_und_Software/Rack_for_6551_Scheu_brush.STL

https://www.scheu-dental.com/en

The post IMPRIMO® 3d Model Separator appeared first on Eurodontic.

3D Model Insulation is best suited for insulation of acrylate-based printed models. Once the insulation applied, it is possible to manufacture orthodontic plates on the models using cold cure resin like STEADY-RESIN S in the salt and pepper technique.
For an optimum insulation effect resin against resin it is sufficient to apply just one or two layers with the enclosed brush. In order to prevent skin contact we recommend wearing gloves.
The drying time of the 3D model insulation is approx. 30 min.
After polymerisation, the orthodontic plate should be cleaned by steam blasting and in an ultrasonic bath in order to remove any insulation residues.
Use CETRON® spray to make the surface shine.
Important notice: Only for extraoral application.

3D_Model_Instructions

3D-Model_Datasheet

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

https://www.scheu-dental.com/en 

The post 3D Model insulating agent appeared first on Eurodontic.