Steady-Resin S+M

Universal monomer, can be processed with all STEADY-RESIN polymer versions. The clear monomer can be mixed with STEADY-RESIN coloured monomers.

Available in Clear and Pink   500ml Steady-Resin S+M

STEADY-RESIN is a highly transparent cold-cure resin, specifically designed for orthodontics and available in three different polymer versions
–S, M and VARIO– in accordance with the different processing types (see below). All STEADY-RESIN monomers can be combined with all
STEADY-RESIN polymers. STEADY-RESIN is fabricated on the base of methyl methacrylate, contains no cadmium and contains tertiary amines
for polymerisation. When processed properly, STEADY-RESIN is a safe medical product and highly biocompatible. Mica (available in silver, gold,
blue, red, green, rainbow, rainbow green, rainbow violet/REF 8144-8152) can be added to polymer; however overdosing can affect the polymerisation process or the stability.
Indication: STEADY-RESIN is intended solely for dental explications and indicated for expansion plates, retainers, activators, splints with adjusted surfaces etc.
Contraindication: The material is not indicated for production of dentures.
Intolerances: Allergy to methyl methacrylate (CAS 80-62-6) or dibenzoyl peroxide (CAS 94-36-0) or p-tolyldiethanolamine (CAS 3077-12-1). In case of highly
sensitized patients it is recommended to place the appliance in water for several hours to minimize the residual monomer content. Please refer to
the corresponding safety data sheet at www.scheu-dental.com/en/download.
Preparation: It is recommended to put the models in warm water at a temperature of 35°–40° C for about 10 min. in order to avoid bubble formation at the
basal surfaces.
Isolation: Apply one thin layer of orthodontic insulating agent (REF 8364) to the models. We rececommend using IMPRIMO® Model Separator (REF 6551)
for insulating 3D-printed models.
Processing: STEADY-RESIN S used for the so called “salt-and-pepper” technique is characterized by excellent stability. The resin is directly applied to the
model that has been insulated with orthodontic insulating agent. Apply monomer first and then alternately apply polymer and monomer using the
spray bottles (REF 8141) and spray nozzles (REF 8138/8139). The last layer to be applied before the polymerisation process should be polymer.
STEADY-RESIN M for the modelling technique is distinguished by excellent values in terms of flowability and processing range. It is mixed in
RESIMIX® cups prior to applying it to the model that has been pre-treated with orthodontic insulating agent.
STEADY-RESIN VARIO can be used universally for both, the salt-and-pepper and the modelling techniques thanks to the extended processing time.
Working parameters: The indicated values are to be understood as recommendations only and may be affected by room temperature and mixing ratio.
Processing time: 6– 8 minutes
Mixing ratio: STEADY-RESIN S 10 : 4 weight proportion polymer : monomer
STEADY-RESIN M / STEADY-RESIN VARIO 10 : 5 weight proportion polymer : monomer
This mixing ratio corresponds to about 2.7 : 1 volume of polymer : monomer.
Polymerisation: Curing shall always be carried out in a pressure pot filled with clean water; polymerisation shall not be interrupted and the values given below
should be neither higher nor lower. Any change to the parameters can lead to the formation of bubbles, inhomogeneity, increased shrinkage and
higher residual monomer content.
Temperature: approx: 45 – 48 °C / ≈ 113 °F
Pressure: 1.8 – 2.0 bar / ≈ 30 psi
Time: 15 – 20 min.
Finishing: Once polymerisation is completed, STEADY- RESIN can be finished and polished conventionally using carbide cutters. The use of respiratory
protection or local exhaust systems is recommended.
Shelf life/storage: For information on the shelf life/storage of the polymers and monomers see label imprint. Processing after the expiration date should be subject
to prior examination of the product. Once the resin has been filled in the transparent dosing bottles, these must be protected from direct sunlight,
as this may lead to polymerisation reactions and to changes in colour. The resin should always be stored in sealed dry containers at a temperature of max. 25 °C and protected from light.
Hazard warnings: The liquid is easily flammable! The liquid causes irritations of the eye, skin and respiratory tracts. Keep away from sources of ignition and
keep well ventilated, do not allow to enter the sewage system. Prolonged and direct skin contact with uncured material and inhalation of
monomer vapours can lead to irritations. Ensure to follow the instructions on wearing protective clothing as well as the information in
the safety data sheets at www.scheu-dental.com/en/download.
Hints: To be used only for the above indication and by qualified personnel. For single use. Serious incidents in connection with the use of the product

https://www.scheu-dental.com/en

The post Steady-Resin S+M appeared first on Eurodontic.

IMPRIMO® LC Temp Resin fetures

• Viscosity: approx. 1.5 PAS
• Material hardness after curing: approx. 80 shore D

IMPRIMO® System –
Universal and reliable.
The development of a consistent process for medical 3D printing and post-processing is currently a crucial issue in the utilisation of digital orthodontics in the dental field. We, too, have
taken our cue from this trend and developed a complete system
for you:
The IMPRIMO® system allows for a coordinated process chain
from 3D printing to cleaning and light curing. Our extensive
material portfolio is tailored to the needs of laboratories and
practices. Of course, individual support is included when it
comes to setting up and using the printers and the peripheral
equipment.
The IMPRIMO® printer portfolio ranges from the DLP printer
Asiga MAX™ to the high-end models Asiga PRO 4K meeting
the needs of volume users.
The cleaning unit RS wash and the polymersisation unit
RS cure complement our equipment range, reflecting a continuous and process-reliable 3D printing workflow.

Moreover, SCHEU-DENTAL offers a wide range of resins for
different printing systems. Whether you are a beginner, an advanced user or a professional – our IMPRIMO® system with its
tailored range of consumables, devices and accessories will
meet all your demands in medical 3D printing.
Service is important to us, so please get in touch regarding
installation and support. We are happy to assist!

https://scheu-dental.com/en

IMPRIMO_LC

The post IMPRIMO® LC Temp Resin appeared first on Eurodontic.

SCHEU-DENTAL  IMPRIMO® LC Impression Resin at the base of methyacrylate for the fabrication of individual impression trays and bases for bite registrations. Neon orange. Compatible with 3D printing system with 385nm light source.

IMPRIMO_LC

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

https://www.scheu-dental.com/en/

The post IMPRIMO® LC Impression Resin appeared first on Eurodontic.

• Density: approx. 1.1 g/ml
• Viscosity: approx. 0.3 PAS
• Material hardness after curing: approx. 85 shore D

IMPRIMO_LC

https://www.scheu-dental.com/en

Scheu-Dental

We offer you the 360° solution for the dental medicine of the future.

We are constantly developing new dental products for you – based on the latest knowledge and in close cooperation with recognizsed research institutions. We are also always on the lookout for optimisation potential in existing products, which is why we rely on constant exchange with practices and dental laboratories. This is the only way we can develop products that really make the day-to-day work of orthodontists, dentists and technicians easier. Even after you have purchased our dental products, we are always on hand to provide you with expert advice – be it by personally setting up your technical SCHEU devices or answering specific questions from your practice.

From family business to corporate network.

With SCHEU-DENTAL GmbH, SCHEU-DENTAL custom-made GmbH and  SMILE-Dental-Handelsgesellschaft mbH, we offer you three reliable partners who are at your side in the field of dental technology. We create sophisticated designs with sensitivity and experience. Through regular product inspections in accordance with the latest certification standards, we ensure that our quality standards are always maintained.

The post IMPRIMO® LC Cast Resin appeared first on Eurodontic.

Data Sheet Steady Resin

STEADY-RESIN_Instructions

SCHEU DENTAL

About us

In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

Our quality

We want to offer you dental technology that takes you further. This includes both long-lasting and reliable classics that have been part of our range for decades, as well as innovative products that offer new and efficient solutions for dental technology. That is why we are constantly asking ourselves: What challenges do our quality products face?
What can be improved with the latest technology? Which industry offers us developments that we can utilise for the dental sector? We then translate these as a solution into a new product that simplifies the day-to-day work of dental technicians and dentists in the long term. In doing so, we regularly put the quality of our products – whether classic or new – are regularly put to the test.

As a manufacturer of medical devices, we also bear a special responsibility. That is why we comply with the requirements of the EU Medical Device Regulation 2017/745 (MDR) with the utmost care. Our products stand for the highest standards of quality, safety and performance – confirmed by our MDR certification.

https://www.scheu-dental.com/en/about-us

The post STEADY RESIN S POLYMER appeared first on Eurodontic.