screws Archives — Eurodontic

PSM Benefit® Screw 2.0mm

Ward Leonora — Fri, 03 Jan 2025 15:13:24 +0000

PSM Benefit® Screw 2.0mm is the standard implant for appliances like TADMAN BENEslider, Mesialslider, Hybrid Hyrax etc. The implant is delivered in a sterile blister and is picked up with the screwholder from the color-coded sterile holder ready for insertion to the patient.

About PSM

Always making the world of orthodontics a little bit better – that is our mission. Started as a pioneer, PSM Medical is now one of the world’s most important manufacturers of orthodontic implants and everything that goes with them. With the BENEfit® screw, we have developed a standard in the field of palatal and skeletal anchorage. The fact that, in addition to screws, implants, instruments and a wide set of accessories are now also part of the PSM portfolio underlines our claim to be a top manufacturer and premium partner for orthodontics.

The BENEfit®-System, PSM Benefit® Screw 2.0mm

In collaboration with leading specialists, PSM Medical launched the unique BENEfit® Implant System back in 2007. One of the most important requirements for a successful orthodontic treatment is a very stable and reliable anchorage. In this area, our BENEfit® system has established itself worldwide as the benchmark for temporary skeletal anchorage over the past 15 years.

One of the most important advantages is the low surgical invasivity, as well as the low costs.

Compared to conventional mini-implant systems, which sometimes reach their limits when it comes to the connection from the mini-implant to the orthodontic appliance, the BENEfit® system offers a secure connection. Due to the internal thread in the head of the screw, a wide variety of equipment can be integrated safely and reliably.

A variety of prefabricated appliance parts, like plates, abutments etc. are rounding the system off appropriately and are serving almost every indication in modern orthodontics.

Sustainability

What does sustainability mean to you? For us at PSM Medical, sustainability is more than just values, results and numbers – sustainability has a lot to do with attitude and conviction. This is why we set out, and not just since yesterday.

The post PSM Benefit® Screw 2.0mm appeared first on Eurodontic.

VECTOR® Standard Expansion Screws

Ward Leonora — Sat, 18 May 2024 17:35:33 +0000

VECTOR® Standard Expansion Screw

Scheu-Dental Skeletal expansion screw with bright yellow directional arrow for transversal expansion of the lower jaw. For treatment of Angle Class II cases we recommend using VECTOR® 100 in combination with VECTOR® 900.

W x H x L

6.20 x 2.80 x 12.00 mm

expansion

5.00 mm

expansion per 1/1 turn

0.70 mm

expansion per ¼ turn

0.175 mm

VECTOR® Standard Expansion Screw available in 1pc or 50pcs

VECTOR_BRO_PM0135_GB_Original_2958

Vector Datasheet

ints on use of orthodontic screws
No matter how careful the manufacturing of the screws, a minimal gap between space-holder and
screw body can always occur. In order to prevent resin from penetrating in this gap and blocking the
screw thread as a result, we recommend to proceed as follows:
• Before inserting the screw make sure to tighten the marginal gap (if any) with liquid wax. We recommend
using paraffin-free wax.
• Apply a small amount of food-safe and resin-free oil to the screw spindle before polymerisation, in order to
guarantee free mobility of the screw.
• Once the resin has cured in the pressure pot, remove the space holder, separate the plate and soak it
shortly (for less than a minute) in no longer boiling water.
• Make sure to insert the key completely into the activation hole, exerting continuous pressure from both
sides in order to open the screw for the first time.
• In order to ensure optimal function, clean the screw thoroughly using steam jet after several turns.

Note:
For the pressure moulding method it is mandatory to use a thermoforming machine with positive pressure in
order to guarantee complete polymerization of the used resin (BIOCRYL® RESIN).
We recommend the following specialized literature for further information:
CA® Book Volume 2 Advanced
English: REF 5309 / German: REF 5307 / Spanish: REF 5318
Important:
Make sure not to exceed the maximal tooth movement in the CA® CLEAR ALIGNER technique acc. to
Dr. Pablo Echarri (CA® Book volume 2, Advanced, pages 52/53).

The post VECTOR® Standard Expansion Screws appeared first on Eurodontic.

BENEfit® Starter Kit S

Ward Leonora — Tue, 20 Feb 2024 12:18:24 +0000

BENEfit® Starter Kit S

33-55000 PSM BENEfit® Starter Instrument Set S without implants consisting of:

BENEfit® Starter Instrument Set S
73-31990 BENEfit® small instrument tray, empty BENEfit®
33-18236 Thumb screw for Dental mandrel
33-54512 Screwdriver for abutment, 20mm
10-67513 Drill, 1.4 x 33 mm WL 15 mm, DENTAL, red
33-18232 Screwholder for implants

https://psm-medical.com/en/

The BENEfit®-System

One of the most important advantages is the low surgical invasivity, as well as the low costs.

A variety of prefabricated appliance parts, like plates, abutments etc. are rounding the system off appropriately and are serving almost every indication in modern orthodontics.

About PSM
Always making the world of orthodontics a little bit better – that is our mission. Started as a pioneer, PSM Medical is now one of the world’s most important manufacturers of orthodontic implants and everything that goes with them. With the BENEfit® screw, we have developed a standard in the field of palatal and skeletal anchorage. The fact that, in addition to screws, implants, instruments and a wide set of accessories are now also part of the PSM portfolio underlines our claim to be a top manufacturer and premium partner for orthodontics.

Sustainability

The post BENEfit® Starter Kit S appeared first on Eurodontic.