We offer free CPD training and support to our customers, as well as offering a machine repair and loan service.

For machine purchases, we ask for a 70% deposit via BACS. We will contact you to arrange this once you place the order.

The compact Scheu Ministar device  is equipped with advanced scanning technology. The scanner reads the coded material, allowing programming of all important parameters such as heating time, temperature and cooling time.

A compressor is required to operate the Ministar. 

In other words, ultra precise pressure moulding results are achieved in record time, thanks to the rapid, patented heater and working pressure of 4.0 bar, adjustable via pressure regulator. The new generation machines are equipped with user-friendly membrane keypad and large display. All operating parameters are monitored and indicated on the display.

Technical data

• • Power: 230/115/100 V, 750 W
  • Working pressure: 0.5 – 4.0 bar
  • Dimensions (W × H × D): 500 × 210 × 400 mm
  • Weight: 9 kgs
  • 3 years warranty, 10 years availability of spare parts
• • . compressor is recommended with an output greater than 4 bars of pressure,  The Ministar S^® comes with airline and Euro male connection, you will need a Euro quick release coupling 1/4inch for your compressor.When you purchase a Bambi Compressor with Ministar S^® from Eurodontic save 5% and receive free installation.

Important

A manufacturer of medical devices must register with the MHRA  (Medicines and Health Regulatory Agency) and must understand and comply with (MDR) Medical Device Regulations. ​

The regulations stipulate that appliances must be manufactured with acceptable materials and must be signed off by a GDC-registered person. ​

A manufacturing organisation requires a responsible person who is two years post-qualification and is competent in the area of appliance manufacture.

MINISTAR_S

Ministar_Biostar_Application_manual

Trouble Shooting Biostar & Ministar

https://scheu-dental.com/en

The post SCHEU-DENTAL MINISTAR S® appeared first on Eurodontic.

Scheu-Dental Biostar ®

Versatile pressure moulding machine for all applications in dental pressure moulding and orthodontics, equipped with scan technology and 6.0 bar working pressure, adjustable by pressure reducing valve on the unit. The unique thermally controlled infrared heater reaches working temperature in one second. All parameters such as temperature, heating and cooling times are programmed by reading the scanner or entering the corresponding code. The coloured 3.2″ LCD display with a resolution of 320 x 240 pixel leads you through the single working steps of the pressure moulding process, providing further information on scanned material, its indication as well as a library with illustrated application hints for fabrication. Rear port for easy updates. Large model cup facilitates embedding of mounted models. Pellet container ensures optimum dispensing and storing of pellets.

A compressor is required to operate the Ministar

Trouble Shooting Biostar & Ministar

Scheu-Dental Thermoforming Materials

https://scheu-dental.com/en

The post BIOSTAR® appeared first on Eurodontic.

A win for your daily laboratory and practice routine!
Productive, precise and flexible – start your own high-end production now, enabling you to thermoform up to 4 aligners at the same time.

High Productivity

Make your workflow more comfortable and efficient. With the SCHEU DENTAL BIOSTAR® 4-Aligner it is possible to thermoform up to
4 foils at the same time and thus 120 aligners in one hour.

Precise Results

Each foil is individually heated in its own pressure chamber and thermoformed at 4 bar. The foils fit perfectly to the
tooth rim, thus achieving optimum pressure molding results with the usual high aligner quality.

Flexible Processes

With the Scheu Dental Biostar 4 Aligner , you can choose from various SCHEU-DENTAL foil formats depending on your individual
preference: Round foils (Ø 120-125 mm) or rectangular stripes exclusively available from SCHEU-DENTAL for
quadruple application (499 x 114 mm).

Features BIOSTAR® 4-Aligner

BIOSTAR® 4-Aligner 95-230 V
REF #3030
Power 1450 watt
Working pressure 4 bar
Dimensions (W x D x H) 612 x 337 x 524 mm
Weight 50 kg

With the BIOSTAR® 4-Aligner, you can choose from various SCHEU-DENTAL foil formats depending on your individual
preference: Round foils (Ø 120-125 mm) or rectangular stripes exclusively available from SCHEU-DENTAL for
quadruple application (499 x 114 mm)

An unbeatable combination.

Perfect results with the innovative foil format from SCHEU-DENTAL.

The stripes, which are exclusively available from SCHEU-DENTAL, are designed for quadruple application and are provided with a scannable code. As with all SCHEU-DENTAL thermoforming units, all you have to do is scan the code on the stripes and the parameters for the thermoforming process, such as heating and cooling times, are preset. Round foils (Ø 120-125 mm) can also be thermoformed easily with the BIOSTAR® 4-Aligner to produce up to 2 aligners at the same time.

BIOSTAR 4-Aligner_BRO_PM5374_11_23

SCHEU-DENTAL: Your expert for dental technology / SCHEU-DENTAL

The post Scheu-Dental Biostar® 4-Aligner appeared first on Eurodontic.

Applications – mouthguards, bruxism splints, (bleaching trays 2 mm or more- recommend Bioplast Bleach product code 3190 if you require 1mm which is firmer than Bioplast 1 mm)

Description: BIOPLAST® is a soft elastic rubber-like thermoforming material made of ethylene vinyl acetate (EVA) that does not bond
to acrylic. BIOPLAST® has been tested and approved for its biological safety.

Indication: Duplicating moulds for plaster situation models, mouth guard, bruxism splints, positioner, OSAMU-Retainer®.

Model Preparation: If necessary, block out strong undercuts using BLUE-BLOKKER® before pressurizing. For model insulation we recommend BIOPLAST® insulating agent (REF 3189/3166). Apply one layer of the insulating agent to the model, making sure
to prevent the liquid from accumulating in the cavities as well as from drying out.

Pressure Moulding: We recommend to place dental arcade models on the model platform and to embed full models in the pellets. Adhesion
of pellets to the model and the resulting loss of pellets can be considerably reduced by using the pellet cover (REF 3006
large/REF 3007 small).

Finishing: You can reduce the splint to its final extension using SD foil scissors A (REF 3460) or B (REF 3461). The BIOPERM
trimmer (REF 3226), DIMO®PRO (REF 3381), DIMO®PRO SLIM (REF 3376) and POLYFIX (REF 3371) are best suited for
finishing. Best polishing results are achieved using the OSAMU polisher (REF 3247) at 5000 – 10000 rpm.

Cleansing/care: Our CETRON® cleansing and care products are the best choice for splints made of BIOPLAST®.

Storage: Protect from sunlight. Store in a dry place.

Safety note: To be used only for the above indication and by qualified personnel. For single use. Serious incidents in connection with the
use of the product must be reported immediately to the manufacturer and the competent authority!

BIOPLAST_VKP_0373_GB_Original_3288

https://scheu-dental.com/en

The post Bioplast® appeared first on Eurodontic.

The ideal solution for every aligner treatment.
Scheu-Dental innovative thermoforming sheet sets new standards for greater efficiency and comfort during aligner treatment. With just one layer, the UNIQ achieves what many multilayer foils cannot achieve. With its single layer material, it permanently withstands forces
during the entire treatment. The result? A pleasant wearing comfort with gentle initial forces and constant restoring forces. With UNIQ, we have developed a foil that achieves maximum benefits in every aligner treatment with just one layer!

Innovative
With just one layer, UNIQ offers outstanding material properties and also stands out from other aligner foils with its wide range of thicknesses. This makes it a versatile and attractive option for orthodontists and patients.

Long-term elasticity
With UNIQ, we achieve remarkably high elasticity while guaranteeing consistently good performance throughout the entire aligner treatment. This performance is achieved with just a single layer – a benchmark that many cannot even achieve with multiple layers.

Comfortable
Reduced initial forces and constant restoring forces not only ensure a gentle wearing sensation, but also smooth planning during the entire aligner treatment with UNIQ.

Reliable
The single layer material of the UNIQ makes post-processing considerably easier compared to multilayer foils. Fewer breaks can also ensure a smooth clinical procedure.

Sustainable
Compared to multilayer foils,

Uniq® + Strips requires significantly less energy during production, which not only protects the environment in the long term, but is also much more cost-efficient. The surplus material from production is also recyclable and can be reused.

https://scheu-dental.com/en 

https://www.eurodontic.co.uk/product-category/pressure-moulding/materials-accessories/

Scheu-Dental Biostar® 4-Aligner

The post Biostar® 4-Aligner Uniq®+ Strips appeared first on Eurodontic.