CONTACT US FOR PRE ORDER: 01142766813 – sales@eurodontic.co.uk

If we could 3D Print Enamel, This is it.

SprintRay Midas Restore is a definitive restorative resin filled to more than 75% by weight with glass ceramic and zirconia — engineered for full-coverage crowns, inlays, onlays, and veneers. It holds 98% of its polish after 5,000 brushing cycles, resists wear five times better than SprintRay Ceramic Crown, and matches the translucency range of milled lithium disilicate. Scan, press, polish, deliver — in a single visit.

Midas Restore takes the opposite approach. Its resin matrix arrests cracks
rather than simply resisting them, and its flexural modulus sits closer to
dentin than to a glass ceramic. When adhesively bonded to remaining
tooth structure, the restored tooth distributes function as a single unit –
instead of concentrating stress at the interface.

Indicated for definitive full single crowns, definitive partial crowns
(inlays and onlays) in the anterior and posterior, and single veneers.
Available in five natural shades – A1, A2, A3, and B1 –

resin capsules are validated for use with Midas Digital Press.

SPRINTRAY MIDAS RESTORE TECHNICAL DATA https://www.eurodontic.co.uk/
Property
Biaxial flexural
strength
Flexural modulus
Surface hardness
Midas Restore
215 MPa max.
180 MPa mean
10.5 GPa max.
10.0 GPa mean
81.9 ± 6.4 HV
Test Method
ISO 6872, piston-on-three-balls
ISO 4049, 3-point
Vickers microhardness,
ISO-referenced protocol,
independently measured at the
University of Alabama at
Birmingham School of
Dentistry.
What It Means Clinically
Resistance to fracture under occlusal load. Crown HT 203
max/ 168 mean; Ceramic Crown 205 max / 170 mean.
Closer to dentin (17.5 ± 3.8 GPa*). A bonded restoration that flexes
with the tooth transfers load through the interface rather than concentrating stress at it. Crown HT 7.4 GPa; Ceramic Crown 5.8 GPa.
Statistically equivalent to a leading nanofilled direct composite,
and roughly double the hardness of previous-generation printed
restorative resins (20–39 HV). Contributes to wear resistance and
polish retention.
Regulatory Status
CE marked – Class IIa medical device under
Regulation (EU) 2017/745 (EU MDR)
FDA 510(k) – K260661 · Class II · 21 CFR 872.3690,
Tooth Shade Resin Material · Rx only
Composition
More than 75% filler by weight – a dual
filler system combining glass ceramic
and zirconia powder in a lightcurable methacrylate resin matrix.
Test conditions
Unless otherwise noted, all values were
measured on specimens pressed on the
Midas Digital Press and post-processed
per the validated SprintRay workflow.
SURFACE & OPTICAL
PHYSICAL & SAFETY
CLINICAL HANDLING NOTES
Property
Gloss retention
Wear resistance
Translucency
parameter (TP)
Shade and color
stability
Polishability
Midas Restore
98% of initial gloss at
5,000 cycles
5x SprintRay Ceramic
Crown; comparable
to a milled hybrid
ceramic
13.5 (shade A1)
Pass
Polish to final
What It Means Clinically
A surface that holds its polish through daily brushing
resists staining and biofilm accumulation.
Wear performance in the range of a milled restoration, and
five times that of our previous-generation definitive material.
• Milled lithium disilicate HT 13.9
• SprintRay Crown HT 13.4
• SprintRay Ceramic Crown 10.9 (varies by shade).
Shade does not change under accelerated aging.
Green state zirconia or hybrid ceramic polishing systems.
No glaze required.
Test Method
Simulated
toothbrush abrasion
in water.
Internal testing on specimens,
200,000 cycles. No ISO
standard exists for this
method.
Higher TP = more translucent.
All materials measured under
the same protocol.
ISO 10477, after irradiation
and water sorption
ISO 10477 surface finish
MECHANICAL
Midas Restore
22–24 µg/mm³ (limit <40)
1.0–2.5 µg/mm³ (limit <7.5)
Not detectable
Radiopaque –
equivalent to aluminum
Pass
Pass
What It Means Clinically
Dimensional and optical stability in the oral environment.
Resistance to dissolution in the oral environment.
No detectable residual methyl methacrylate.
Margins and recurrent caries are assessable radiographically.
A restoration only works if it stays attached. Measures how firmly
the material holds to the tooth once cemented. A crown that
debonds fails the patient just as surely as one that fractures.
Tested for tissue contact exceeding 30 days.

https://sprintray.com/

The post SPRINTRAY MIDAS RESTORE appeared first on Eurodontic.

SprintRay Nano Series – available for pre order.

CONTACT US FOR PRE ORDER: 01142766813 – sales@eurodontic.co.uk

What Is the Nano Series?

The Nano Series is a chairside production workflow built for one-case-at-a-time dentistry. It brings together three new systems — NanoPrint, NanoWash and NanoCure — into a single, intelligently connected print, wash and cure workflow.

Together, NanoPrint, NanoWash and NanoCure fit within 30 in. of counter space, bringing a complete production sequence into a footprint designed for everyday chairside use.

Nano Series supports more than 16 indications and is validated across SprintRay’s restorative materials, bringing professional-grade production capability into a footprint sized for everyday chairside use — without compromising workflow or clinical versatility.

One thing is important to understand from the start: Nano Series isn’t a scaled-down version of SprintRay’s existing production systems. It’s a workflow engineered specifically around single-case chairside production.

Why Nano Series Is Built for Right-Sized Production

Most dental 3D printing workflows are designed around batch production — larger build volumes, multi-case runs, and post-processing steps that assume volume.

That’s not how most chairside cases work.

Nano Series approaches production differently. Rather than asking practices to manage full-scale production equipment for single-unit cases, Nano Series is purpose-built around the reality of one-case-at-a-time dentistry — without asking clinicians to sacrifice the connected, validated workflow they’d expect from a larger system.

Cloud connectivity, along with technologies like AutoPrint and Job Handoff, moves cases seamlessly from print through post-processing, so the case keeps moving even as it changes hands between steps.

The important distinction isn’t simply that Nano Series is smaller. It’s what the smaller footprint is engineered to accomplish once it’s part of a practice’s daily workflow.

What This Means Clinically

A chairside production system needs to do more than fit on a counter.

It needs to move a case through print, wash and cure efficiently without added handling, support the range of indications a practice actually sees day to day, and stay validated against the materials clinicians already trust.

Nano Series was engineered around those realities.

Right-Sized Without Compromise
Supporting more than 16 indications, Nano Series is built to handle the broad range  of chairside cases within a compact production footprint.

Connected by Design
AutoPrint and Job Handoff help a case move through the print, wash and cure sequence automatically, reducing the manual handoffs that typically slow chairside workflows down.

Validated Materials
Nano Series is validated across SprintRay’s restorative material lineup, giving practices access to a broad portfolio across the Nano workflow.

Bringing Scanning Into the Workflow: Foundation and ScanOS

Nano Series addresses production. Foundation and ScanOS address what happens before it.

Foundation is the first intraoral scanner built for ScanOS, extending SprintRay’s connected workflow all the way back to the start of the digital case.

ScanOS makes scanning a native part of the SprintRay Workspace environment — alongside Design Suite and Print Setup. Rather than moving between separate scanner software, separate accounts and manual file transfers, clinicians can move a single case through scan, design, print setup and production within one unified cloud connected digital environment.

That matters because the biggest source of friction in digital workflows is rarely any one step. It’s what happens at the seams between steps — the export, the upload, the format conversion, the second login. ScanOS is designed to remove those seams.

From Scan to Delivery, in One Connected System

Despite the range of technology behind these announcements, the clinical workflow is intentionally straightforward.

Scan the case on Foundation. Move it through Design and Print Setup within ScanOS. Produce it chairside on Nano Series, with AutoPrint and Job Handoff carrying the case through print, wash and cure. Then deliver.

The goal is a connected workflow in which clinicians spend less time moving between technologies and more time focused on the case itself.

Right-sized, per Patient.

For ten years, SprintRay has been advancing chairside dental 3D printing. Now, we’ve taken everything we’ve learned and brought it together in a complete, compact workflow designed to make professional 3D printing easier to bring into more practices, in under 76 cm counter space.

• NanoPrint – Right-sized, per patient. Print, wash and cure for single-patient workflows, in the most compact system we have ever built. 40
• NanoWash – Six minutes. Sealed. Bone dry after one wash and dry cycle, right on the build platform.
• NanoCure – The one that started “Nano” – dual-wavelength technology for optimized biocompatibility and mechanical properties, no nitrogen needed.

The post SprintRay Nano Series – Promotional Offer. appeared first on Eurodontic.

• Biocompatible
• Transparent
• Polishable
• Stain-resistant

Use up and down arrow keys to resize the meta box pane.

Move upMove downShow or hide panel

Move upMove downShow or hide panel

• SEO
• Readability
• Schema
• Social

Optimise your content for discovery.

Focus keyphrase

Focus keyphrase

Keysplint Soft™

KeySplint Soft is fully biocompatible, and is in compliance with international medical device regulations and standards. Its robust formulation has three years of guaranteed shelf life, is color stable, and is validated in multiple open-source printers. No other dental splint resin can deliver the quality and performance of KeySplint Soft.

Biocompatible
Transparent
Polishable
Stain-resistant
INDEPENDENT STUDY ON WEAR EXPECTATIONS
KEYSPLINT SOFT IN IDT
DOCTOR TESTIMONIALS
Utilizing unique patent-pending technologies, Keystone Industries has developed a one-of-a-kind 3D printing resin for the fabrication of flexible dental splints, nightguards, and bleaching trays. This DLP-optimized resin is an exceptional printing material, that combines the strength needed to protect teeth against disorders like bruxism with added flexibility for better patient comfort. KeySplint Soft is also easily cleaned by the patient.
Within the USA, KeyPrint® KeySplint Soft® is indicated for the fabrication of orthodontic and dental appliances such as mouthguards, nightguards, splints, repositioners, and bleaching trays.

Outside the USA, KeyPrint® KeySplint Soft® is indicated for the fabrication of orthodontic and dental appliances such as bite planes, mouthguards, nightguards, snoring appliances, splints, and repositioners.

PROPERTIES METHOD

Ultimate Flexural Strength ISO 20795-2 2.6–4.4 MPa
Flexural Modulus ASTM D790 1356 MPa
Tensile Strength ASTM D638 52 MPa
Young’s Modulus Tensile ASTM D638 1790 MPa
Water Sorption ISO 20795-2 < 18 μg/mm3
Elongation at Break ASTM D638 110%
Biocompatability Pass ISO 10993-1

Utilizing unique technologies, Keystone Industries has developed a one-of-akind 3D printing resin for the fabrication of flexible, durable dental splints and
nightguards. This DLP-optimized resin is an exceptional printing material that
combines the strength needed to protect teeth against disorders like bruxism,
with added flexibility for better patient comfort. https://keyprint.keystoneindustries.com/

The post Keyprint Keysplint Soft appeared first on Eurodontic.

Biocompatible, tasteless, and odorless, KeyOrtho IBT is ideal for manufacturing indirect bonding trays. Drastically reduce chair time and increase patient comfort during the orthodontic bracket setting process.

In an industry that is increasingly defined by the ability to innovate, adapt, and produce consistent results, Keystone Industries introduced KeyPrint in 2018, a line of precision 3D resins specifically formulated for the dental industry. Keystone has combined its unique blend of dental and photopolymer expertise to deliver the highest quality 3D printing resins to the dental market.

https://www.eurodontic.co.uk/?s=keyprint&post_type=product&wps-title=1&wps-excerpt=1&wps-content=1&wps-categories=1&wps-attributes=1&wps-tags=1&wps-sku=1&ixwps=1

https://dental.keystoneindustries.com/

The post Keyprint KeyOrtho IBT Resin appeared first on Eurodontic.

Keyprint® KeyGuide™ Resin Features

• Strong
• Easy to polish
• Autoclavable and colour stab

https://keyprint.keystoneindustries.com/keysplint-soft/

https://www.eurodontic.co.uk/?s=keyprint&post_type=product&wps-title=1&wps-excerpt=1&wps-content=1&wps-categories=1&wps-attributes=1&wps-tags=1&wps-sku=1&ixwps=1

https://dental.keystoneindustries.com/

In an industry that is increasingly defined by the ability to innovate, adapt, and produce consistent results, Keystone Industries introduced KeyPrint in 2018, a line of precision 3D resins specifically formulated for the dental industry. Keystone has combined its unique blend of dental and photopolymer expertise to deliver the highest quality 3D printing resins to the dental market.

Entirely designed and produced in the USA, the full KeyPrint line is available throughout North America, Europe, and other global territories. KeyPrint resins are compatible with DLP, LED and LCD printers (wavelengths of 385-405 nm). Keystone is profiling 3D printers on an ongoing basis to ensure our KeyPrint resins work reliably in multiple open-source printers.

Prioritizing patient safety, KeyPrint resins are subjected to a battery of biocompatibility tests in accordance with global regulatory standards. Each biocompatible print complies with international standards to ensure efficacy and effectiveness for the patient. KeyPrint’s robust formulations guarantee a 3-year shelf life, along with color stability.

Where we’ve been
Dedication & Innovation
Keystone’s dedication to high-quality, US-made products & customer satisfaction has always been second to none since the company’s inception in 1908.

Where we are
Taking Dentistry By Storm
Through the years, Keystone Industries has maintained a strong reputation of producing innovative dental products for the dental laboratory, operatory and preventive realms.

Where we’re going
Expanding Exponentially
The state-of-the-art, 250,000 square foot facility in Gibbstown, NJ allows Keystone Industries to expand capabilities in manufacturing pharmaceutical products for the dental industry.

The post Keyprint KeyGuide appeared first on Eurodontic.

Flexible Partial Dentures

Breakthrough materials deliver comfort, precision, and aesthetics

Schedule a Demo https://sprintray.com/en-uk/apex-flex-request-a-sample/

Meet Apex Flex

Apex Flex allows you to produce natural-looking, flexible partial dentures in your practice to meet patient needs and reduce the time to teeth.

Use Pro 2 with the Duo Kit to print the base and teeth simultaneously, then bond in NanoCure for partial dentures delivered in under an hour.

Apex Flex allows you to produce natural-looking, flexible partial dentures in your practice to meet patient needs and reduce the time to teeth.

Use Pro 2 with the Duo Kit to print the base and teeth simultaneously, then bond in NanoCure for partial dentures delivered in under an hour.https://www.eurodontic.co.uk/shop/

xceptional toughness

>25 MPa flexural strength for strong clasps that hold up to chewing forces

Remarkably flexible

50% elongation at break allows the prosthetic to move naturally without cracking

Comfortable

Flexural modulus >700 MPa delivers flexibility for exceptional comfort

Strong, load-bearing

Virtually unbreakable under normal use with >5000 J/m² work of fracture

Apex Flex is SprintRay’s biocompatible resin for flexible partial
denture bases. Designed for comfort, it delivers tissue-friendly
fit with exceptional strength. Validated to work seamlessly with
SprintRay Apex Teeth, Apex Flex enables the rapid production
of flexible partial dentures through SprintRay’s complete
digital workflow.
Sprintray Apex Flex Partial Base
Standard Pink (500g) – SRI-0202187
Light Pink (500g) – SRI-0202188

ENGINEERED FOR STRENGTH AND FLEXIBILITY
Uniquely formulated to provide the ideal balance
of durability, flexibility, and load-bearing performance –
ensuring reliability across all functional demands of a flexible
partial denture.
Work of Fracture >5000 J/m²
Unmatched durability and virtually unbreakable under normal
use, providing exceptional resistance to catastrophic failure.
Elongation at Break >50%
Superior flexibility allows the appliance to move naturally
with the patient, ensuring premium comfort without cracking
or stress.
Flexural Strength >26.5 MPa
Engineered with the ideal strength profile to reliably withstand
the functional forces placed on flexible partials and clasps.
Flexural Modulus >700 MPa
Delivers precisely targeted flexibility, allowing for comfortable
insertion, excellent clasp retention, and absorption of shock
from bite forceshttps://sprintray.com/design-3d-print-flexible-partial-dentures/

The post NEW APEX FLEX by SprintRay appeared first on Eurodontic.

Our values

What drives us

For almost 100 years, we have been dedicated to innovation and the highest quality in the field of dental technology. In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.

What is our tradition?

Tradition

We do what we can – and have been doing so for a very long time. We have been supplying the dental industry with high-quality dental technology since 1926. In the process, we have developed some classics that are still decisive today in terms of function and durability: for example, the SCHEU anchor. But it is not only our products and our expertise that make up the tradition at SCHEU-DENTAL.

An integral part of our company history is the responsibility we take for our region and our employees. We employ over 300 people, some of whom have not only worked for us for several decades, but often for several generations. We are proud of this, because our employees are the face of our company.

The post Bioperm® Trimmer appeared first on Eurodontic.

Keyprint® KeyModel Ultra™,Light-curing, methacrylate-based, for 3D printing. For the fabrication of precise dental and orthodontic models. For DLP/LED printers with a wavelength of 385 to 405 nm. Also suitable for a number of LCD monochrome printers.

Uses and Advantages

• Ultra-fast printing
• Thermoforming quick-release agent
• Flawless detail
• Multiple available colors
• Carve-able without chipping
• Pairs perfectly with KeyMask™

Keyprint® KeyModel Ultra™ is available in Ivory and Light Grey 1kg & 4KGhttps://keyprint.keystoneindustries.com/

Uses and Advantages

• Ultra-fast printing
• Thermoforming quick-release agent
• Flawless detail
• Multiple available colors
• Carve-able without chipping
• Pairs perfectly with KeyMask™

KeyModel Ultra™ 4 KG BOTTLE £298.41

KeyModel Ultra™ 4 KG BOTTLE £298.41

KeyModel Ultra™ is a liquid photopolymer
resin designed for additive manufacturing
in Vat Polymerization DLP printers utilizing
wavelengths between 385nm–405nm.
Characterized by its fast print speed,
flawless surface detail, and integrated
thermoforming release agent, KeyModel
Ultra™ is a material designed for 3D
printing of dental and orthodontic models.
The user should review all applicable
product labeling, including Instructions
for Use, user manuals, and associated
labeling for any component(s) used in
conjunction with KeyModel Ultra™.
Strict adherence to all labeling is
critical in assuring a safe and effective
printed appliance.
Contraindications: Contains acrylate
monomers and oligomers, which, although
rare, may cause an allergic reaction
in individuals sensitive to acrylic
containing products.

Compatible Equipment
To ensure the printed model meets our
standards for high quality, Keystone
Industries collaborates with printer
manufacturers to provide validated printer
and post-cure settings. Visit Keystone
Industries’ website for a list of completed
and in-process validations.

Processing Printed Parts
1. Pour the liquid material in the reservoir of
the printer. Follow the printers’ instructions
for use.
2. Print the part according to your printers’
Instructions for use.
Keystone recommends two nesting
orientations for dental models (1) Flat,
with the occlusal plane parallel to the build
plate or (2) Vertical, with the occlusal plane
perpendicular to the build plate.
3. Remove printed parts from the
build plate.

The post KeyModel Ultra™ 4 KG BOTTLE £298.41 appeared first on Eurodontic.

Keyprint® Keymask® -Pink Resin  flexible yet firm gingival mask that simulates the look and feel of gum tissue https://www.eurodontic.co.uk/product/keyprint-keymask-pink-resin/

• Perfect for digital restoration planning
• Easily trimmed to create a proper emergence profile or sculpted for proper pontic shape

0.5Kg

Keyprint® Keymask® -Pink Resin

Since 1908, Keystone Industries has maintained a strong reputation of producing innovative high-tech dental products in both the operatory and laboratory realms. We are committed to the goal of total customer satisfaction. We are dedicated to the achievement of this goal by meeting or exceeding our customer expectations for product quality, competitive pricing and prompt delivery and customer service.

In an industry that is increasingly defined by the ability to innovate, adapt, and produce consistent results, Keystone Industries introduced KeyPrint in 2018, a line of precision 3D resins specifically formulated for the dental industry. Keystone has combined its unique blend of dental and photopolymer expertise to deliver the highest quality 3D printing resins to the dental market.

Entirely designed and produced in the USA, the full KeyPrint line is available throughout North America, Europe, and other global territories. KeyPrint resins are compatible with DLP, LED and LCD printers (wavelengths of 385-405 nm). Keystone is profiling 3D printers on an ongoing basis to ensure our KeyPrint resins work reliably in multiple open-source printers.

Prioritizing patient safety, KeyPrint resins are subjected to a battery of biocompatibility tests in accordance with global regulatory standards. Each biocompatible print complies with international standards to ensure efficacy and effectiveness for the patient. KeyPrint’s robust formulations guarantee a 3-year shelf life, along with color stability. https://dental.keystoneindustries.com/

Keystone Industries

U.S. Dental Manufacturer Since 1908

Where we’ve been

Dedication & Innovation

Keystone’s dedication to high-quality, US-made products & customer satisfaction has always been second to none since the company’s inception in 1908.

Where we are

Taking Dentistry By Storm

Through the years, Keystone Industries has maintained a strong reputation of producing innovative dental products for the dental laboratory, operatory and preventive realms.

Where we’re going

Expanding Exponentially

The state-of-the-art, 250,000 square foot facility in Gibbstown, NJ allows Keystone Industries to expand capabilities in manufacturing pharmaceutical products for the dental industry.

The post Keyprint® Keymask® -Pink Resin appeared first on Eurodontic.

Build Platform and Resin tank are purchase separately, please select both for SprintRay Crown Kit.https://www.eurodontic.co.uk/product/sprintray-crown-resin/

• The Crown Kit consists of a compact build platform and a specialized tank, allowing less material use and fast printing of up to 6 crowns in under 15 minutes.
• The Crown Kit is compatible with our SprintRay Crown resin, allowing a workflow from data acquisition to patient delivery in 45 minutes – making this the first real 3D printing Chairside solution in the world.
• AI Crown Design Services in Europe. With artificial intelligence, customers simply need to upload their scan in order to receive a ready-to-print STL file of a posterior crown within a few minutes. This makes the workflow even more frictionless. Sprintray, already serve all customers who design themselves.

The SprintRay Pro S Crown Kit is the first 3D printing solution designed specifically to fabricate ceramic restorations. With the Crown Kit, you can produce up to 6 single unit crowns in 10 minutes, all while reducing resin waste. In this bundle:

– SprintRay Crown Build Platform
A new, compact build platform with a hard anodized aluminum surface and powerful onboard heater. Its 1.5” x 2” build area can fit up to 6 single unit crowns.

– SprintRay Crown Resin Tank
With a 50mL capacity, the compact tank uses resin efficiently and heats up rapidly. Works with the Pro S to track resin usage and lifetime, expected up to 15 liters.

A new, compact resin tank for SprintRay Pro S printers designed for 3D printing ceramic crowns. Features a 50mL capacity for efficient resin usage and rapid heat transfer. Works in tandem with the Pro S printer to track resin usage and tank lifetime. The Crown Kit Resin Tank has an expected life of up to 15 liters of resin. Must be used with the Crown Kit Build Platform .

SprintRay Crown by BEGO® is a ceramic filled hybrid material for 3D printing single crowns, inlays, onlay, and veneers. This material is easy to finish and polish using traditional methods, and features excellent aesthetics to blend with existing teeth.

High strength and resistance to wear make SprintRay Crown by BEGO® a go-to material for restorative 3D printing. And because SprintRay Crown by BEGO® is FDA 510(k) cleared and fulfills all the requirements for a Class II medical device, you can place with confidence.

Crown is available in seven shades: A1, A2, A3, B1, B3, C2, and D3. Available for sale in the US, EU, UK, and EFTA.

• Biocompatible, FDA 510(k) cleared and fulfills all the requirements for a Class II medical device
• Versatile: use as a single crown on natural tooth or abutment, as an inlay, onlay or veneer
• Very low water absorption reduces the tendency to age while a smooth surface means low plaque accumulationhttps://www.eurodontic.co.uk/product/sprintray-crown-resin/

Final-003-EU-ENG-CERAMIC CROWN KIT-Brochure_View_

The post SprintRay Crown Kit RESIN TANK appeared first on Eurodontic.