CONTACT US FOR PRE ORDER: 01142766813 – sales@eurodontic.co.uk https://www.eurodontic.co.uk/login/

The Multi Unit Capsule features more than 3x the build area of the Single Unit Capsule and is designed for large-format restorations.

Multi Unit Capsule -Key Features

• Expanded build area
• Supports multi-unit and arch-based cases
• Same DPS high-viscosity capability

Multi Unit Capsule Common Applications

• Smile mock-ups
• Front six restorations
• Split front eight restorations
• Multi-unit bridges
• Temporary bridges
• Temporary implant bridges

The Multi Unit Capsule is ideal for extended restorations and bridge fabrication.

• Use Digital Press Stereolithography
• Support highly-filled composite materials
• Require no resin tanks or reusable build platforms
• Use barcode scanning for automated setup

The choice depends on restoration size, not material capability.

The Multi Unit Capsule features more than 3x the build area of the Single Unit Capsule and is designed for large-format restorations.

Midas Capsules are available for multiple restorative materials, including:

• Crown HT
• Ceramic Crown
• OnX Tough 2
• Digital Temp

Material availability may vary by capsule format and indication.

midascapsule

Overview

Midas uses Digital Press Stereolithography (DPS), a patented printing method that replaces traditional resin bottles, resin tanks, and reusable build platforms with a sealed Resin Capsule. Each capsule contains the build platform, material, and press mechanism in one single-use unit.

This capsule-based workflow eliminates exposed resin handling while enabling highly-filled, high-viscosity composite printing for chairside restorations.https://sprintray.com/

The post Multi Unit Capsule – Pre Order appeared first on Eurodontic.

CONTACT US FOR PRE ORDER: 01142766813 – sales@eurodontic.co.uk

If we could 3D Print Enamel, This is it.

SprintRay Midas Restore is a definitive restorative resin filled to more than 75% by weight with glass ceramic and zirconia — engineered for full-coverage crowns, inlays, onlays, and veneers. It holds 98% of its polish after 5,000 brushing cycles, resists wear five times better than SprintRay Ceramic Crown, and matches the translucency range of milled lithium disilicate. Scan, press, polish, deliver — in a single visit.

Midas Restore takes the opposite approach. Its resin matrix arrests cracks
rather than simply resisting them, and its flexural modulus sits closer to
dentin than to a glass ceramic. When adhesively bonded to remaining
tooth structure, the restored tooth distributes function as a single unit –
instead of concentrating stress at the interface.

Indicated for definitive full single crowns, definitive partial crowns
(inlays and onlays) in the anterior and posterior, and single veneers.
Available in five natural shades – A1, A2, A3, and B1 –

resin capsules are validated for use with Midas Digital Press.

SPRINTRAY MIDAS RESTORE TECHNICAL DATA https://www.eurodontic.co.uk/
Property
Biaxial flexural
strength
Flexural modulus
Surface hardness
Midas Restore
215 MPa max.
180 MPa mean
10.5 GPa max.
10.0 GPa mean
81.9 ± 6.4 HV
Test Method
ISO 6872, piston-on-three-balls
ISO 4049, 3-point
Vickers microhardness,
ISO-referenced protocol,
independently measured at the
University of Alabama at
Birmingham School of
Dentistry.
What It Means Clinically
Resistance to fracture under occlusal load. Crown HT 203
max/ 168 mean; Ceramic Crown 205 max / 170 mean.
Closer to dentin (17.5 ± 3.8 GPa*). A bonded restoration that flexes
with the tooth transfers load through the interface rather than concentrating stress at it. Crown HT 7.4 GPa; Ceramic Crown 5.8 GPa.
Statistically equivalent to a leading nanofilled direct composite,
and roughly double the hardness of previous-generation printed
restorative resins (20–39 HV). Contributes to wear resistance and
polish retention.
Regulatory Status
CE marked – Class IIa medical device under
Regulation (EU) 2017/745 (EU MDR)
FDA 510(k) – K260661 · Class II · 21 CFR 872.3690,
Tooth Shade Resin Material · Rx only
Composition
More than 75% filler by weight – a dual
filler system combining glass ceramic
and zirconia powder in a lightcurable methacrylate resin matrix.
Test conditions
Unless otherwise noted, all values were
measured on specimens pressed on the
Midas Digital Press and post-processed
per the validated SprintRay workflow.
SURFACE & OPTICAL
PHYSICAL & SAFETY
CLINICAL HANDLING NOTES
Property
Gloss retention
Wear resistance
Translucency
parameter (TP)
Shade and color
stability
Polishability
Midas Restore
98% of initial gloss at
5,000 cycles
5x SprintRay Ceramic
Crown; comparable
to a milled hybrid
ceramic
13.5 (shade A1)
Pass
Polish to final
What It Means Clinically
A surface that holds its polish through daily brushing
resists staining and biofilm accumulation.
Wear performance in the range of a milled restoration, and
five times that of our previous-generation definitive material.
• Milled lithium disilicate HT 13.9
• SprintRay Crown HT 13.4
• SprintRay Ceramic Crown 10.9 (varies by shade).
Shade does not change under accelerated aging.
Green state zirconia or hybrid ceramic polishing systems.
No glaze required.
Test Method
Simulated
toothbrush abrasion
in water.
Internal testing on specimens,
200,000 cycles. No ISO
standard exists for this
method.
Higher TP = more translucent.
All materials measured under
the same protocol.
ISO 10477, after irradiation
and water sorption
ISO 10477 surface finish
MECHANICAL
Midas Restore
22–24 µg/mm³ (limit <40)
1.0–2.5 µg/mm³ (limit <7.5)
Not detectable
Radiopaque –
equivalent to aluminum
Pass
Pass
What It Means Clinically
Dimensional and optical stability in the oral environment.
Resistance to dissolution in the oral environment.
No detectable residual methyl methacrylate.
Margins and recurrent caries are assessable radiographically.
A restoration only works if it stays attached. Measures how firmly
the material holds to the tooth once cemented. A crown that
debonds fails the patient just as surely as one that fractures.
Tested for tissue contact exceeding 30 days.

https://sprintray.com/

The post SPRINTRAY MIDAS RESTORE appeared first on Eurodontic.

ONX TOUGH 2

Introducing SprintRay OnX Tough 2, a groundbreaking dental 3D printing resin for use in creating fixed hybrid dentures. This resin leverages the cutting-edge NanoFusion™ technology, which set a new industry
standard by offering exceptional durability and visual quality.https://www.eurodontic.co.uk/product/onx-tough-2/

he result is a remarkably natural appearance that closely resembles natural enamel.
OnX Tough 2 empowers dental professionals to fabricate fixed hybrids
chairside while rivaling milled PMMA material qualities – all without extra
mixing or rolling. OnX Tough 2 ensures unmatched strength and
high-quality aesthetics, streamlining the process for increased efficiency
and fewer appointments.
500g bottles available now in: A1, A2, B1, Bleach and Hollywood White.

Full Arch Implant Rehabilitation
Rehabilitation of full arch edentulous patients was the primary reason and indication
for dental implants back in 1977 when Branemark introduced the osseointegration
process and endosseous dental implants.
Rehabilitation of patients with the need for full arch implant supported prosthesis
(often called hybrid prosthesis) has been growing rapidly among dental practitioners
and is demanded by many patients nationwide.
1
This treatment enables restoration of
function and aesthetics in very reasonable timeframes. The current trend in implant
rehabilitations is to develop materials to improve the aesthetics and mechanical
properties, reduce treatment time, and ultimately simplify treatment procedures.2
Conventional Methods of Hybrid Denture Fabrication
Conventionally, the provisional prosthesis delivered to patients during the healing
period would be fabricated by connecting temporary cylinders to a premade
PMMA based prosthesis. This procedure, which is performed either on the day of
surgery in case of immediate loading, or at a later time when the implants are fully
osseointegrated. In case of delayed loading, it is time consuming and can cause
discomfort for patients. However, introduction of CAD/CAM in dentistry and
improvements in digital dentistry workflows has enabled clinicians to reduce the
postoperative complications, improve the patient satisfaction, and provide more
predictable treatment outcome.
3
To date, the search for optimum material is
ongoing and constant research and innovation has created very unique materials
applicable for full arch implant rehabilitations.

Flexural Strength and Flexural Modulus
Objective
This study evaluated the flexural strength and flexural modulus of the samples
printed with available dental 3D printing hybrid denture materials in the market.
This study provides a valuable insight into the mechanical properties of these
3D printed resins.
Materials and Methods
For this evaluation, bars with 4 mm thickness, 12.7 mm width, and 125 mm length
were fabricated according to the ASTM D790. For this test the support span was
set at 64 mm. Moreover, bars with 2 mm thickness, 2 mm width, and 25 mm length
dimensions were fabricated according to the ISO 4049 standard. For this test the
support span was set at 20 mm. The materials printed for this study were OnX Tough
2 (SprintRay), Flexcera Smile Ultra Plus (Desktop Health), Rodin Sculpture (Pac-Dent),
and Trusana (Myerson). All samples were printed and cured according to the
manufacturer’s IFU. https://sprintray.com/

The post OnX Tough 2 appeared first on Eurodontic.

UPRGADE AND SAVE!! Get 10%off your total when you purchase the SprintRay Arch Kit Resin Tank together with the platform. https://www.eurodontic.co.uk/product/sprintray-pro-2-arch-kit/

Introducing the all new SprintRay PRO 2 Arch Kit.

Pro 2 Arch Kit comes with the proprietary Optical Polish Technology, enabling users to 3d printed appliances with a pre-polished surface, reducing post -processing time significantly.

Streamline Workflow Efficiency

SprintRay PRO 2 3D Printer.

The SprintRay Arch Kit is designed to unlock the speed potential of SprintRay PRO 2 3D printers.

3D print 2 dental models in as little as 13 minutes, maximize resin usage, and provide more same-day care.

Built for Single-Patient Prints

The Arch Kit build platform features a powerful onboard heater and a hard anodized coating to resist corrosion and oxidation.

Reduce Resin Waste

The 125 ml capacity compact tank uses resin efficiently and heats up rapidly to form a perfect pair with the Arch Kit Build Platform.

3D Print More, Faster

3D print the most common dental appliances up to 2X faster without compromising quality or accuracy

Appliance Print Times

Digital Dentures

Standard Kit 110 mins

Arch Kit 70 mins

Implant Dentures

Standard Kit 35 mins

Arch Kit 20 mins

Night Guard

Standard Kit 45 mins

Arch Kit 22 mins

Dental Model

Standard Kit 25 mins

Arch Kit 12 mins

PLATFORM

Pro 2 Arch Kit Build Platform is a compact build platform that ensures faster printing. Made from hard anodized aluminum, this platform is designed for durability and precision and includes a powerful built-in heater. The 4.1”x2.9” print area can fit up to 2 full arches, making it perfect for various full arch applications such as models, night guards, surgical guides, full arch hybrids, and dentures. Must be used with the  (SRI-0503047) Arch kit resin Tank.

RESIN TANK

SprintRay Pro 2 Arch Kit Resin Tank is a compact resin tank with a 150mL capacity. This tank ensures faster prints and optimal resin usage and rapid heat transfer for Pro 2 series printers. Must be used with the  (SRI-0503046) Pro 2 Arch Kit Build Platform

https://sprintray.com/pro-s-dental-3d-printer/.

The post SprintRay Pro 2 ArchKit – 10% BUNDLE DISCOUNT (SAVE £251.58) appeared first on Eurodontic.

Build Platform and Resin tank are purchase separately, please select both for SprintRay Crown Kit.https://www.eurodontic.co.uk/product/sprintray-crown-resin/

• The Crown Kit consists of a compact build platform and a specialized tank, allowing less material use and fast printing of up to 6 crowns in under 15 minutes.
• The Crown Kit is compatible with our SprintRay Crown resin, allowing a workflow from data acquisition to patient delivery in 45 minutes – making this the first real 3D printing Chairside solution in the world.
• AI Crown Design Services in Europe. With artificial intelligence, customers simply need to upload their scan in order to receive a ready-to-print STL file of a posterior crown within a few minutes. This makes the workflow even more frictionless. Sprintray, already serve all customers who design themselves.

The SprintRay Pro S Crown Kit is the first 3D printing solution designed specifically to fabricate ceramic restorations. With the Crown Kit, you can produce up to 6 single unit crowns in 10 minutes, all while reducing resin waste. In this bundle:

– SprintRay Crown Build Platform
A new, compact build platform with a hard anodized aluminum surface and powerful onboard heater. Its 1.5” x 2” build area can fit up to 6 single unit crowns.

– SprintRay Crown Resin Tank
With a 50mL capacity, the compact tank uses resin efficiently and heats up rapidly. Works with the Pro S to track resin usage and lifetime, expected up to 15 liters.

A new, compact resin tank for SprintRay Pro S printers designed for 3D printing ceramic crowns. Features a 50mL capacity for efficient resin usage and rapid heat transfer. Works in tandem with the Pro S printer to track resin usage and tank lifetime. The Crown Kit Resin Tank has an expected life of up to 15 liters of resin. Must be used with the Crown Kit Build Platform .

SprintRay Crown by BEGO® is a ceramic filled hybrid material for 3D printing single crowns, inlays, onlay, and veneers. This material is easy to finish and polish using traditional methods, and features excellent aesthetics to blend with existing teeth.

High strength and resistance to wear make SprintRay Crown by BEGO® a go-to material for restorative 3D printing. And because SprintRay Crown by BEGO® is FDA 510(k) cleared and fulfills all the requirements for a Class II medical device, you can place with confidence.

Crown is available in seven shades: A1, A2, A3, B1, B3, C2, and D3. Available for sale in the US, EU, UK, and EFTA.

• Biocompatible, FDA 510(k) cleared and fulfills all the requirements for a Class II medical device
• Versatile: use as a single crown on natural tooth or abutment, as an inlay, onlay or veneer
• Very low water absorption reduces the tendency to age while a smooth surface means low plaque accumulationhttps://www.eurodontic.co.uk/product/sprintray-crown-resin/

Final-003-EU-ENG-CERAMIC CROWN KIT-Brochure_View_

The post SprintRay Crown Kit RESIN TANK appeared first on Eurodontic.

Sprintray NanoCure is host to a triple-threat of technologies in a compact form factor. Expand your capacity while improving speed to care without losing counter space.

• Enables Current and Future BioMaterials Innovations
• Office Space Saver – 50% smaller than ProCure 2
• Easy to Use Touchscreen with WiFi connectivity and Automatic Updates
• Dual Wavelength 365nm and 385nm for maximum biocompatibility
• Up to 4 full arch models, 8 quads models
• Nitrogen free
• Powerful instant heater

SprintRay Nanocure

Speed

Post cure your prints in just
a few minutes with no need for nitrogen tanks

Power

Maximize mechanical properties
with 365+385 nm LEDs and smart
thermal management

Chemistry

Unlock a whole new
generation of material
chemistry for digital dentistry

Prosthetics
Cemented Restorations: 5 mins
Hybrid Dentures: 5 mins
Conventional Dentures: 15 mins

Orthodontics
Models for Aligners: 2 mins
Models for Retainers: 2 mins

IDB Trays: 2 mins

General Dentistry
Night Guards: 4 mins
Surgical Guides: 3 mins
Dental Models: 2 mins

Maxed out Mechanicals

Long-wavelength light and heat create
cross-linked reactions, maximizing the
mechanical properties of your appliances.

Shade Perfect

NanoCure produces restorations with
shades closer than ever to your shade
guide, helping meet patient expectations.

Biocompatibility, Fast

Short-wavelength light scatters across the
surface of your parts to quickly cure for
maximum biocompatibility, every time.

Goodbye, Nitrogen

Our Biomaterials Lab formulates resin that
works in perfect harmony with our hardware,
eliminating the need for nitrogen

SPRINTRAY MIDAS + NANOCURE £11, 150.00
SPRINTRAY MIDAS + NANOCURE MIDAS BUNDLE OFFER

Save more with Eurodontic – bundle the SprintRay Midas and Nano Cure for an exclusive deal. For more information : sales@eurodontic.co.uk

Sprintray Midas features
3D Printing Technology

Viscosity-agnostic Digital Press Stereolithography (DPS)
Continuous pressurized printing system
Advanced cure depth control

Resin Curing Unit

385 nm UV-A LED
SprintRay custom-built UV projector
Factory calibrated for light uniformity and intensity

Minimum Feature Size

45 µm (XY Resolution)

Print Speed

Print up to 3 capsules in less than 10 minutes

Print Glass

Heated glass printing surface
3-capsule max capacity
Removable print template
Easy to clean with IPA and glass cleaner

Resin Capsule

Print Volume (Per capsule)
15 mm diameter
20 mm height
Resin Volume (Per capsule)
4 mL of resin

The post SprintRay NanoCure appeared first on Eurodontic.

CHAIRSIDE RESTORATIONS HAVE NEVER BEEN
                            SMART AND SIMPLE

SprintRay Midas is the ultimate chairside restoration solution. It uses patented Digital Press Stereolithography (DPS) technology and an innovative capsule system to make producing crowns, inlays, onlays and veneers as easy as using your coffee machine. When you buy Midas, you’ll unlock access to AI Studio and unlimited AI designs for one year.

• Fast – print up to 3 full-contour crowns, 6 inlays/onlays or 9 veneers in less than 10 minutes
• Easy to use – £8,500.00 Midas guides users intuitively from scan upload to design and fabrication. It’s easy to use, clean and maintain.
• Revolutionary – patented DPS and capsule technology allow Midas to print without viscosity limitations, including highly filled composites for future biomaterial innovation.

SprintRay Midas Features

3D Printing Technology

Viscosity-agnostic Digital Press Stereolithography (DPS)
Continuous pressurized printing system
Advanced cure depth control

Resin Curing Unit

385 nm UV-A LED
SprintRay custom-built UV projector
Factory calibrated for light uniformity and intensity

Minimum Feature Size

45 µm (XY Resolution)

Print Speed

Print up to 3 capsules in less than 10 minutes

Print Glass

Heated glass printing surface
3-capsule max capacity
Removable print template
Easy to clean with IPA and glass cleaner

Resin Capsule

Print Volume (Per capsule)
15 mm diameter
20 mm height
Resin Volume (Per capsule)
4 mL of resin

Connectivity

2.4 and 5 GHz Wi-Fi chipset
Local network via Wi-Fi b/g/n
Local network via Ethernet cable

User Controls

7” glass touchscreen
Direct print via front-facing USB-C port
Android-based PrintOS onboard software
8-core onboard computer

Power Requirement

100-240V, 50-60Hz, 140 watts
Operating Temperature Range 70 – 85°F (21 – 29°C)
Unit Dimensions
(W x D x H)
8 x 8 x 14.5 in.
20 x 20 x 37 cm

Shipping Dimensions & Weight

13 x 18.5 x 14 in.
33 x 47 x 35.5 cm
24 lb.
11 kg https://sprintray.com/en-uk/3d-printing-products/sprintray-resins/#tan2

The post SprintRay Midas appeared first on Eurodontic.

Sprintray have a large selection of dental 3D printing materials which are designed to get the most out of SprintRay 3D printers. Developed and tested for market-leading performance in digital dentistry, SprintRay resins are built to achieve high quality results while providing great value for money. With a large selection of biocompatible and model materials, our resins are designed for dental 3D printing.

•  Long-term temporaries
•  Denture teeth
•  Fast fabrication

SprintRayTemporary Crown Resin a biocompatible resins for temporary crowns and bridges, as well as for temporary use in the anterior region. The SprintRay EU Temporary Crown & Teeth material is also excellent for long-term temporaries due to its material properties.

About SprintRay https://sprintray.com/en-uk/3d-printing-products/sprintray-resins/#tan2

Established 2014

SprintRay is a technology company that builds end-to-end 3D printing solutions for dental practices and laboratories. Because we are in charge of the design, manufacturing, and support of our products, we can provide full-stop additive manufacturing solutions that are both cutting-edge and user-friendly.

Dentistry as focal point

For us, finding and solving problems is a way of life. Our design and engineering choices are not just informed by the dental community, they are created in service to the community. We build our products so that they solve problems today, while being prepared for tomorrow.

Product expertise instead of product jumble

We’re here to make a carefully-curated selection of the best manufacturing tools the dental industry has ever seen. Our catalogue isn’t filled with dozens of products in search of solutions. For us to stamp our name on something, it must be carefully considered, targeted, and meticulously designed to meet your needs.

For the Next 100 Years of Dentistry

Our 3D printing products are born from the dental community. They are a collaboration between master designers, world-class dental professionals, and superlative engineers who operate in total alignment with a single goal: revolutionize dentistry by bringing affordable, easy, in-office 3D manufacturing to every dental practice in the world.

We Give Physical Form to Digital Technologies

Intraoral scanning, CAD/CAM design, digital design collaboration, virtual waxups, and many more contemporary dental technologies have changed the way dentistry is practiced. These powerful tools have helped clinicians improve care and efficiency the world.

The post SprintRayTemporary Crown Resin appeared first on Eurodontic.

CHAIRSIDE RESTORATIONS HAVE NEVER BEEN
                            SMART AND SIMPLE

SprintRay Midas is the ultimate chairside restoration solution. It uses patented Digital Press Stereolithography (DPS) technology and an innovative capsule system to make producing crowns, inlays, onlays and veneers as easy as using your coffee machine. When you buy Midas, you’ll unlock access to AI Studio and unlimited AI designs for one year.

• Fast – print up to 3 full-contour crowns, 6 inlays/onlays or 9 veneers in less than 10 minutes
• Easy to use – Midas guides users intuitively from scan upload to design and fabrication. It’s easy to use, clean and maintain.
• Revolutionary – patented DPS and capsule technology allow Midas to print without viscosity limitations, including highly filled composites for future biomaterial innovation.

SprintRay Midas Features

3D Printing Technology

Viscosity-agnostic Digital Press Stereolithography (DPS)
Continuous pressurized printing system
Advanced cure depth control

Resin Curing Unit

385 nm UV-A LED
SprintRay custom-built UV projector
Factory calibrated for light uniformity and intensity

Minimum Feature Size

45 µm (XY Resolution)

Print Speed

Print up to 3 capsules in less than 10 minutes

Print Glass

Heated glass printing surface
3-capsule max capacity
Removable print template
Easy to clean with IPA and glass cleaner

Resin Capsule

Print Volume (Per capsule)
15 mm diameter
20 mm height
Resin Volume (Per capsule)
4 mL of resin

Connectivity

2.4 and 5 GHz Wi-Fi chipset
Local network via Wi-Fi b/g/n
Local network via Ethernet cable

User Controls

7” glass touchscreen
Direct print via front-facing USB-C port
Android-based PrintOS onboard software
8-core onboard computer

Power Requirement

100-240V, 50-60Hz, 140 watts
Operating Temperature Range 70 – 85°F (21 – 29°C)
Unit Dimensions
(W x D x H)
8 x 8 x 14.5 in.
20 x 20 x 37 cm

Shipping Dimensions & Weight

13 x 18.5 x 14 in.
33 x 47 x 35.5 cm
24 lb.
11 kg https://sprintray.com/en-uk/

The post SprintRay Midas appeared first on Eurodontic.

Contact Us for more information : sales@eurodontic.co.uk

Sprintray Midas featureshttps://www.eurodontic.co.uk/product/sprintray-midas-nanocure/

3D Printing Technology

Viscosity-agnostic Digital Press Stereolithography (DPS)
Continuous pressurized printing system
Advanced cure depth control

Resin Curing Unit

385 nm UV-A LED
SprintRay custom-built UV projector
Factory calibrated for light uniformity and intensity

Minimum Feature Size

45 µm (XY Resolution)

Print Speed

Print up to 3 capsules in less than 10 minutes

Print Glass

Heated glass printing surface
3-capsule max capacity
Removable print template
Easy to clean with IPA and glass cleaner

Resin Capsule

Print Volume (Per capsule)
15 mm diameter
20 mm height
Resin Volume (Per capsule)
4 mL of resin

Connectivity

2.4 and 5 GHz Wi-Fi chipset
Local network via Wi-Fi b/g/n
Local network via Ethernet cable

User Controls

7” glass touchscreen
Direct print via front-facing USB-C port
Android-based PrintOS onboard software
8-core onboard computer

Power Requirement

100-240V, 50-60Hz, 140 watts
Operating Temperature Range 70 – 85°F (21 – 29°C)
Unit Dimensions
(W x D x H)
8 x 8 x 14.5 in.
20 x 20 x 37 cm

Shipping Dimensions & Weight

13 x 18.5 x 14 in.
33 x 47 x 35.5 cm
24 lb.
11 kg

SprintRay NanoCure

NanoCure is host to a triple-threat of technologies in a compact form factor. Expand your capacity while improving speed to care without losing counter space.

• Enables Current and Future BioMaterials Innovations
• Office Space Saver – 50% smaller than ProCure 2
• Easy to Use Touchscreen with WiFi connectivity and Automatic Updates
• Dual Wavelength 365nm and 385nm for maximum biocompatibility
• Up to 4 full arch models, 8 quads models
• Nitrogen free
• Powerful instant heater

Speed

Post cure your prints in just
a few minutes with no need for nitrogen tanks

Power

Maximize mechanical properties
with 365+385 nm LEDs and smart
thermal management

Chemistry

Unlock a whole new
generation of material
chemistry for digital dentistry

Prosthetics
Cemented Restorations: 5 mins
Hybrid Dentures: 5 mins
Conventional Dentures: 15 mins

Orthodontics
Models for Aligners: 2 mins
Models for Retainers: 2 mins

IDB Trays: 2 mins

General Dentistry
Night Guards: 4 mins
Surgical Guides: 3 mins
Dental Models: 2 mins

Maxed out Mechanicals

Long-wavelength light and heat create
cross-linked reactions, maximizing the
mechanical properties of your appliances.

Shade Perfect

NanoCure produces restorations with
shades closer than ever to your shade
guide, helping meet patient expectations.

Biocompatibility, Fast

Short-wavelength light scatters across the
surface of your parts to quickly cure for
maximum biocompatibility, every time.

Goodbye, Nitrogen

Our Biomaterials Lab formulates resin that
works in perfect harmony with our hardware,
eliminating the need for nitrogen.https://sprintray.com/en-uk/?mtm_campaign=Sprintray%20UK&gad_source=1&gad_campaignid=16871808918&gbraid=0AAAAAodWiif-0cTqKnzkWOs32brap2y2A&gclid=CjwKCAjwtIfPBhAzEiwAv9RTJsF-tQuvWB4AGeOidySsscJSRuWBJ0WOXETyzJSatObhDC4mzcX68xoCPc8QAvD_BwE

SPRINTRAY MIDAS + NANOCURE MIDAS BUNDLE OFFER

The post SPRINTRAY MIDAS + NANOCURE BUNDLE OFFER appeared first on Eurodontic.