SprintRay Nano Wash

SprintRay Nano Wash  Leave the print on the platform. Drop it in.NanoWash submerges the platform, agitates and driesin one sealed six-minutecycle, venting fumes safely
out. Every solvent tank is removable, RFID-tagged, and assigned to a resin – swap tanks, not your work flow,with life and level tracked automatically.

SprintRay workflow shares:

Dual-wavelength, nitrogenfree, and quick enough that finishing stops being the bottleneck. Remove supports, drop parts in, hit Start. It’s already warm – Job Handoff preheated it while NanoWash was running.

SprintRay Nano Wash  Features

• Dual-wavelength, nitrogen-free technology
for thorough surface and volume curing,
ensuring maximum biocompatibility and
medical-grade results.
• Automatic warm-up via Job Handoff
• Cloud-connected cure profiles for
every SprintRay resin
• Lifetime software updates – it gets
better on your counter
Features
• Full-submersion wash with the print
still on the build platform
• Built-in drying – same chamber,
same cycle, six minutes total
• Fully sealed chamber with an
exhaust port for solvent fumes
• Hot-swappable RFID solvent
tanks – one per resin, no cross-
contamination
• Solvent life and level tracked per tank,
with reminders to top up or swap.

The Nano Series is a chairside production workflow built for one-case-at-a-time dentistry. It brings together three new systems — NanoPrint, NanoWash and NanoCure — into a single, intelligently connected print, wash and cure workflow.

Together, NanoPrint, NanoWash and NanoCure fit within 30 in. of counter space, bringing a complete production sequence into a footprint designed for everyday chairside use.

Nano Series supports more than 16 indications and is validated across SprintRay’s restorative materials, bringing professional-grade production capability into a footprint sized for everyday chairside use — without compromising workflow or clinical versatility.

One thing is important to understand from the start: Nano Series isn’t a scaled-down version of SprintRay’s existing production systems. It’s a workflow engineered specifically around single-case chairside production.

Right-sized, per Patient.

For ten years, SprintRay has been advancing chairside dental 3D printing. Now, we’ve taken everything we’ve learned and brought it together in a complete, compact workflow designed to make professional 3D printing easier to bring into more practices, in under 76 cm counter space.

• NanoPrint – Right-sized, per patient. Print, wash and cure for single-patient workflows, in the most compact system we have ever built. 40
• NanoWash – Six minutes. Sealed. Bone dry after one wash and dry cycle, right on the build platform.
• NanoCure – The one that started “Nano” – dual-wavelength technology for optimized biocompatibility and mechanical properties, no nitrogen needed.

https://www.eurodontic.co.uk/sprintray-nano-series-pre-order/

https://sprintray.com/en-uk/nanowash-automated-washer-and-dryer-for-dental-appliances/