BLUE-BLOKKER ®
BLUE-BLOKKER ®https://www.eurodontic.co.uk/product/blue-blokker/
SCHEU-DENTAL Light-curing, blue transparent blocking out and modelling material. For fabrication of space maintainers for bleaching splints and medical trays, and sealing saw cuts in set-up models. Can also be used in prosthetics. Curing in wavelength range of 380-470nm. 4×1.5g.
BLUE-BLOKKER® is applied directly from the dosing syringe and can be easily combined with conventional waxes. Light-hardened BLUE-BLOKKER® outdoor telescopes are stable and can be lifted off without tension. BLUE-BLOKKER® also burns at large layer thicknesses, residue-free. The casting results are absolutely dimensionally stable with excellent fit accuracy.
The thixotropic adjustment of the material as well as the micro- and Mini cannulas facilitate the targeted dosing and application of the
Material. Curing is carried out using commercially available UV lamps in the spectral range of 380-470 nm. Depending on the material order and Lamp type hardens BLUE-BLOKKER® in 10-30 sec.
– Sealing saw cuts and blocking teeth and teeth segments after adjustment in the set-up technique.
– Precise application of the gel reservoir – (depending on the bleaching
system) – in accurately defined thickness for bleaching and fluorisation splints and medical trays.
– Blocking out cervical margins, gaps, and strongly divergent teeth as
well as fixing wire elements when fabricating hard elastic splints.
– Applying BLUE-BLOKKER ® directly out of the dosing tip. BLUEBLOKKER ® can be very well combined with conventional waxes.
Light-cured BLUE-BLOKKER ® outer telescopes will be very stable
and can be removed easily without tension. Even when working with
higher thicknesses, BLUE-BLOKKER ® will burn without residues. The
results will show high dimensional stability and perfect fitting.
– The ideal viscosity and the micro and mini cannula allow precise application of the material. Curing with standard UV light in the spectral
range of 380-470 nm. Depending on material quantity and type of
light, BLUE-BLOKKER ® cures within 10-30 seconds
Scheu-Dental UNIQ+ pd
The ideal solution for every aligner treatment.
Scheu-Dental innovative thermoforming sheet sets new standards for greater efficiency and comfort during aligner treatment. With just one layer, the Scheu-Dental UNIQ+ pd achieves what many multilayer foils cannot achieve. With its single layer material, it permanently withstands forces
during the entire treatment. The result? A pleasant wearing comfort with gentle initial forces and constant restoring forces. With UNIQ+, we have developed a foil that achieves maximum benefits in every aligner treatment with just one layer!
Innovative
With just one layer, UNIQ+ offers outstanding material properties and also stands out from other aligner foils with its wide range of thicknesses. This makes it a versatile and attractive option for orthodontists and patients.
Long-term elasticity
With UNIQ+, we achieve remarkably high elasticity while guaranteeing consistently good performance throughout the entire aligner treatment. This performance is achieved with just a single layer – a benchmark that many cannot even achieve with multiple layers.
Comfortable
Reduced initial forces and constant restoring forces not only ensure a gentle wearing sensation, but also smooth planning during the entire aligner treatment with UNIQ.
Reliable
The single layer material of the UNIQ+ makes post-processing considerably easier compared to multilayer foils. Fewer breaks can also ensure a smooth clinical procedure.https://www.eurodontic.co.uk/product-category/pressure-moulding/materials-accessories/
Sustainable
Compared to multilayer foils, UNIQ+ requires significantly less energy during production, which not only protects the environment in the long term, but is also much more cost-efficient. The surplus material from production is also recyclable and can be reused.https://scheu-dental.com/en
NightGuard Firm 2
NG Firm 2 is the material of choice for rigid occlusal guards. With leading fracture toughness and resistance to wear, Firm 2 provides a whole new dimension to smile protection. This resin is ready to hold up to the rigors of heavy grinding and clenching.
Firm 2 helps you deliver appliances you know will last under the hard rigors of daily use. Available in an all-new Midnight Purple shade, this material can be polished to a translucent shine for an occlusal guard that will protect patients’ smiles for years to come.
With NG Firm 2, SprintRay is delivering on the frictionless occlusal guard workflow – from scan, to design, to printing and placement, protecting more smiles and delighting
more patients.
NG Firm 2 is SprintRay’s second-generation biocompatible resin for 3D printing rigid night guards. Featuring improved mechanical properties, high durability and resistance to breakage, NG Firm 2 demonstrates outstanding wear resistance and great aesthetics with a Midnight Purple tint.https://sprintray.com/en-uk/ https://www.eurodontic.co.uk/product/nightguard-firm-2/
About SprintRay
Established 2014
SprintRay is a technology company that builds end-to-end 3D printing solutions for dental practices and laboratories. Because we are in charge of the design, manufacturing, and support of our products, we can provide full-stop additive manufacturing solutions that are both cutting-edge and user-friendly.
Dentistry as focal point
For us, finding and solving problems is a way of life. Our design and engineering choices are not just informed by the dental community, they are created in service to the community. We build our products so that they solve problems today, while being prepared for tomorrow.
Product expertise instead of product jumble
We’re here to make a carefully-curated selection of the best manufacturing tools the dental industry has ever seen. Our catalogue isn’t filled with dozens of products in search of solutions. For us to stamp our name on something, it must be carefully considered, targeted, and meticulously designed to meet yourhttps://www.eurodontic.co.uk/product/nightguard-firm-2/
Scheu Dental Biostar 4 Alignerhttps://www.eurodontic.co.uk/scheu-dental-biostar-4-aligner-2/
A win for your daily laboratory and practice routine!
Productive, precise and flexible – start your own high-end production now, enabling you to thermoform up to 4 aligners at the same time.
High Productivity
Make your workflow more comfortable and efficient. With the SCHEU DENTAL BIOSTAR® 4-Aligner it is possible to thermoform up to
4 foils at the same time and thus 120 aligners in one hour.
Precise Results
Each foil is individually heated in its own pressure chamber and thermoformed at 4 bar. The foils fit perfectly to the
tooth rim, thus achieving optimum pressure molding results with the usual high aligner quality.
Flexible Processes
With the Scheu Dental Biostar 4 Aligner , you can choose from various SCHEU-DENTAL foil formats depending on your individual
preference: Round foils (Ø 120-125 mm) or rectangular stripes exclusively available from SCHEU-DENTAL for
quadruple application (499 x 114 mm).
Features BIOSTAR® 4-Aligner
BIOSTAR® 4-Aligner 95-230 V
REF #3030
Power 1450 watt
Working pressure 4 bar
Dimensions (W x D x H) 612 x 337 x 524 mm
Weight 50 kg
With the BIOSTAR® 4-Aligner, you can choose from various SCHEU-DENTAL foil formats depending on your individual
preference: Round foils (Ø 120-125 mm) or rectangular stripes exclusively available from SCHEU-DENTAL for
quadruple application (499 x 114 mm)
An unbeatable combination.
Perfect results with the innovative foil format from SCHEU-DENTAL.
The stripes, which are exclusively available from SCHEU-DENTAL, are designed for quadruple application and are provided with a scannable code. As with all SCHEU-DENTAL thermoforming units, all you have to do is scan the code on the stripes and the parameters for the thermoforming process, such as heating and cooling times, are preset. Round foils (Ø 120-125 mm) can also be thermoformed easily with the BIOSTAR® 4-Aligner to produce up to 2 aligners at the same time.
BIOSTAR 4-Aligner_BRO_PM5374_11_23
SCHEU-DENTAL: Your expert for dental technology / SCHEU-DENTAL
PRO 2 3D PRINTER Bundle offershttps://www.eurodontic.co.uk/product/sprintray-pro-2/
THROUGHPUT MEETS PRECISION
SprintRay Pro 2 is a next-generation dental 3D printer that delivers unprecedented accuracy and throughput. With patent-pending Optical Panel technology and 385 nm UV-A light, Pro 2 is the most advanced 3D printer we’ve ever built.
Precision
Patent-pending 35 µm Optical Panel technology combined with 385 nm light engine puts Pro 2 at the forefront of 3D printing accuracy.
Throughput
SprintRay Pro 2 can 3D print 6+ full arch dental models in a single job or use the Arch Kit to print up to 2x faster. Now you’re in control of your production workflow.
Supported workflows
Pro 2 is the ultimate practice supercharger, supporting workflows across myriad specialties – from clear aligner production to hyper-precise hybrid dentures.
The most accurate SprintRay printer of all time
SprintRay Pro 2 is redesigned to be the most accurate 3D printer on the market. From refactored resin
profiles to the patent-pending Optical Panel, every decision we make is to improve your outcomes
across the 15+ indications our devices serve. With Pro 2, nothing has been left to chance.
SprintRay NanoCure
NanoCure is host to a triple-threat of technologies in a compact form factor. Expand your capacity while improving speed to care without losing counter space.
- Enables Current and Future BioMaterials Innovations
- Office Space Saver – 50% smaller than ProCure 2
- Easy to Use Touchscreen with WiFi connectivity and Automatic Updates
- Dual Wavelength 365nm and 385nm for maximum biocompatibility
- Up to 4 full arch models, 8 quads models
- Nitrogen free
- Powerful instant heater
SprintRay New ProWash S
cleans and dries your 3D printed dental models in just 9 minutes. Designed to be fast, reliable, and connected, SprintRay raises the bar with the best cleaning system in 3D printing.
Solvent, Managed – Guided maintenance helps maximize and recycle IPA
Big Screen, Big Power – A 5” touchscreen helps streamline your everyday workflow
Wash Your Way – Create custom cleaning cycles for maximum workflow control
3X Drying Performance – A drying fan channels air directly into the wash chamber to prepare parts for curing.
Automatic Updates – Receive software and wash profile updates automaticallyhttps://sprintray.com/en-uk/?mtm_campaign=Sprintray%20UK&gad_source=1&gad_campaignid=16871808918&gbraid=0AAAAAodWiidk54wy6CcKsdlPVKGPjmPce&gclid=Cj0KCQjwyvfDBhDYARIsAItzbZG_ON-upWF66YJg3Di9tuOfwTOaKO41eBubqZFT4PXqCKnZnZNc6OYaAj6wEALw_wcB
The New Standard for Chairside Definitive Restorationshttps://www.eurodontic.co.uk/product/sprintray-crown-ht-chairside-definitive-restorations/
A New Standard in Chairside Aesthetics:
Crown HT – The first Midas-Exclusive Resin
Now EU MDR Class IIa Certified
SprintRay’s new high-translucency restorative resin Crown HT – developed exclusively for the Midas Digital Press system – has officially received EU MDR Class IIa certification. This marks an important step for aesthetic-focused clinicians who want to deliver beautiful, lifelike restorations in a single visit.https://sprintray.com/en-uk/sprintray-crown-ht-the-next-step-in-dentistry-with-midas/
Designed for Midas’ capsule-based Digital Press workflow, the material combines ceramic-filled strength with more than 60% ceramics and exceptional optical properties. Its translucency, shade fidelity, and smooth surface finish allow you to create restorations that integrate seamlessly with the natural dentin – perfect for anterior crowns, inlays, onlays, and veneers produced chairside.
With Midas, aesthetic dentists benefit from a guided, mess-free workflow that eliminates complexity:
- Print chairside restorations in less than 10 minutes
- Achieve consistent, highly aesthetic results with minimal post-processing
- Deliver durable, translucent restorations that blend in beautifully with
natural teeth - Integrate fast AI-powered design tools for a predictable, patient-centric
experience
The combination of the new EU MDR-certified material and Midas’ Digital Press technology brings aesthetics, efficiency, and reliability together, empowering you to elevate your same-day dentistry offerings with confidence.
Beautiful restorations. Minimal steps. Maximum control – now fully certified for clinical use across Europe.
CHAIRSIDE RESTORATIONS HAVE NEVER BEEN
SMART AND SIMPLE
SprintRay Midas is the ultimate chairside restoration solution. It uses patented Digital Press Stereolithography (DPS) technology and an innovative capsule system to make producing crowns, inlays, onlays and veneers as easy as using your coffee machine. When you buy Midas, you’ll unlock access to AI Studio and unlimited AI designs for one year.
- Fast – print up to 3 full-contour crowns, 6 inlays/onlays or 9 veneers in less than 10 minutes
- Easy to use – Midas guides users intuitively from scan upload to design and fabrication. It’s easy to use, clean and maintain.
- Revolutionary – patented DPS and capsule technology allow Midas to print without viscosity limitations, including highly filled composites for future biomaterialhttps://www.eurodontic.co.uk/product/sprintray-midas/
SCHEU-DENTAL Bioplast® Bleach Soft, pliable, rubber-like, transparent material. Does not bond to acrylic.https://www.eurodontic.co.uk/product/bioplast-bleach/
Applications – bleach -rays-for-teeth-whitening use with Bioplast insulating agent
4391502_Datasheet-BIOPLAST-bleach 4392990_BIOPLAST_bleach_BPZ_PM0249_DE_GB_FR_ES
4392990_BIOPLAST_bleach_BPZ_PM0249_DE_GB_FR_ES
Description: BIOPLAST® bleach is a soft elastic rubber-like thermoforming material made of ethylene vinyl acetate (EVA) that
does not bond to acrylic. The material does not require predrying before pressure moulding, as it is not hygroscopic.
The material has been tested and approved for its biological safety.
Indication: Due to its material characteristics, BIOPLAST® bleach is ideally suited for bleach trays for teeth whitening and medical trays. The material has a higher degree of stability than the standard BIOPLAST® material, ensuring a more precise marginal adaptation.
Contraindication: Allergic reactions to components of BIOPLAST® bleach (EVA) cannot be ruled out in sensitized people. Any use not
stated above is contraindicated.
Preparing the model: Apply BLUE-BLOKKER® that serves as a space holder in the required layer thickness to the surfaces that you want to
bleach or treat. We recommend using BIOPLASTIC® insulating agent (REF 3189/3166) for model isolation. Apply one
thin layer of the insulating agent to the model, making sure to prevent the liquid from accumulating in the cavities as
well as from drying out.
Pressure moulding: Generally speaking, we recommend to place dental arches on the model and to embed full models into the pellets.
Adhesion of pellets to the model and the resulting loss of pellets can be considerably reduced by using the pellet cover
(REF 3006 large/REF 3007 small).
Finishing: You can reduce the splint to its final extension using the foil scissors A (REF 3460) and DIMO® PRO SLIM (REF 3376).
Cleansing/care: Our CETRON® cleansing and care products are the best choice for bleach trays for teeth whitening made of BIOPLAST® bleach.https://www.scheu-dental.com/en
SCHEU DENTAL
About us
In 1926, dentist Rudolf Scheu founded the company SCHEU-DENTAL, which significantly shaped the industry in the following decades through research and development work. In 2020, SCHEU-DENTAL, SCHEU-DENTAL custom-made GmbH and SMILE Dental combined their expertise under one roof – with the clear aim of providing innovative dental technology at the highest level and from a single source. This claim has enabled us to establish ourselves as the market leader in the field of dental printing mould technology,
sleep medicine and 3D printing.
Scheu Dental Biostar 4 Alignerhttps://www.eurodontic.co.uk/product/scheu-dental-biostar-4-aligner/
A win for your daily laboratory and practice routine!
Productive, precise and flexible – start your own high-end production now, enabling you to thermoform up to 4 aligners at the same time.
High Productivity
Make your workflow more comfortable and efficient. With the SCHEU DENTAL BIOSTAR® 4-Aligner it is possible to thermoform up to
4 foils at the same time and thus 120 aligners in one hour.
Precise Results
Each foil is individually heated in its own pressure chamber and thermoformed at 4 bar. The foils fit perfectly to the
tooth rim, thus achieving optimum pressure molding results with the usual high aligner quality.
Flexible Processes
With the Scheu Dental Biostar 4 Aligner , you can choose from various SCHEU-DENTAL foil formats depending on your individual
preference: Round foils (Ø 120-125 mm) or rectangular stripes exclusively available from SCHEU-DENTAL for
quadruple application (499 x 114 mm).
Features BIOSTAR® 4-Aligner
BIOSTAR® 4-Aligner 95-230 V
REF #3030
Power 1450 watt
Working pressure 4 bar
Dimensions (W x D x H) 612 x 337 x 524 mm
Weight 50 kg
With the BIOSTAR® 4-Aligner, you can choose from various SCHEU-DENTAL foil formats depending on your individual
preference: Round foils (Ø 120-125 mm) or rectangular stripes exclusively available from SCHEU-DENTAL for
quadruple application (499 x 114 mm)
An unbeatable combination.
Perfect results with the innovative foil format from SCHEU-DENTAL.
The stripes, which are exclusively available from SCHEU-DENTAL, are designed for quadruple application and are provided with a scannable code. As with all SCHEU-DENTAL thermoforming units, all you have to do is scan the code on the stripes and the parameters for the thermoforming process, such as heating and cooling times, are preset. Round foils (Ø 120-125 mm) can also be thermoformed easily with the BIOSTAR® 4-Aligner to produce up to 2 aligners at the same time.
BIOSTAR 4-Aligner_BRO_PM5374_11_23
SCHEU-DENTAL: Your expert for dental technology / SCHEU-DENTAL
PSM Benefit® Screw 2.0mm is the standard implant for appliances like TADMAN BENEslider, Mesialslider, Hybrid Hyrax etc. The implant is delivered in a sterile blister and is picked up with the screwholder from the color-coded sterile holder ready for insertion to the patient.
About PSM
Always making the world of orthodontics a little bit better – that is our mission. Started as a pioneer, PSM Medical is now one of the world’s most important manufacturers of orthodontic implants and everything that goes with them. With the BENEfit® screw, we have developed a standard in the field of palatal and skeletal anchorage. The fact that, in addition to screws, implants, instruments and a wide set of accessories are now also part of the PSM portfolio underlines our claim to be a top manufacturer and premium partner for orthodontics.
The BENEfit®-System, PSM Benefit® Screw 2.0mm
In collaboration with leading specialists, PSM Medical launched the unique BENEfit® Implant System back in 2007. One of the most important requirements for a successful orthodontic treatment is a very stable and reliable anchorage. In this area, our BENEfit® system has established itself worldwide as the benchmark for temporary skeletal anchorage over the past 15 years.
One of the most important advantages is the low surgical invasivity, as well as the low costs.
Compared to conventional mini-implant systems, which sometimes reach their limits when it comes to the connection from the mini-implant to the orthodontic appliance, the BENEfit® system offers a secure connection. Due to the internal thread in the head of the screw, a wide variety of equipment can be integrated safely and reliably.
A variety of prefabricated appliance parts, like plates, abutments etc. are rounding the system off appropriately and are serving almost every indication in modern orthodontics.
Sustainability
What does sustainability mean to you? For us at PSM Medical, sustainability is more than just values, results and numbers – sustainability has a lot to do with attitude and conviction. This is why we set out, and not just since yesterday.https://www.eurodontic.co.uk/product/psm-benefit-screw-2-0mm/
DENTAL MODEL 3KG BOTTLE
Bigger bottles for high-volume production
Labs, orthodontists and larger practices print a lot of model
resin and often need to repurchase material. To improve resin
management, dental professionals can now use Dental Model
resin in 3kg containers. This 3D printing material excels in
durability, accuracy, and speed, becoming a crucial tool for
modern dentistry.
SprintRay Dental Model resin produces robust models with
superior surface finishes, ensuring precise, smooth, and
accurate patient treatment evaluations. It supports both
horizontal and vertical printing, allowing for high dimensional
accuracy.
Enhance your practice’s efficiency with our resin’s fast printing
capabilities, significantly cutting down production times.
The high-contrast colors, Dune and Graphite, make details
crisp and distinct, aiding in precise adjustments.
Discover the power of advanced 3D printing with SprintRay
Dental Model Resin and propel your practice into the futurhttps://www.eurodontic.co.uk/product/dental-model-3kg-bottle/?preview_id=66009&preview_nonce=d787571203&_thumbnail_id=66012&preview=true
About SprintRayhttps://sprintray.com/en-uk/about-us/
Established 2014
SprintRay is a technology company that builds end-to-end 3D printing solutions for dental practices and laboratories. Because we are in charge of the design, manufacturing, and support of our products, we can provide full-stop additive manufacturing solutions that are both cutting-edge and user-friendly.
Dentistry as focal point
For us, finding and solving problems is a way of life. Our design and engineering choices are not just informed by the dental community, they are created in service to the community. We build our products so that they solve problems today, while being prepared for tomorrow.
Product expertise instead of product jumble
We’re here to make a carefully-curated selection of the best manufacturing tools the dental industry has ever seen. Our catalogue isn’t filled with dozens of products in search of solutions. For us to stamp our name on something, it must be carefully considered, targeted, and meticulously designed to meet your needs.
For the Next 100 Years of Dentistry
Our 3D printing products are born from the dental community. They are a collaboration between master designers, world-class dental professionals, and superlative engineers who operate in total alignment with a single goal: revolutionize dentistry by bringing affordable, easy, in-office 3D manufacturing to every dental practice in the world.
We Give Physical Form to Digital Technologies
Intraoral scanning, CAD/CAM design, digital design collaboration, virtual waxups, and many more contemporary dental technologies have changed the way dentistry is practiced. These powerful tools have helped clinicians improve care and efficiency the world.
Duo Kit for Pro 2 Printers https://www.eurodontic.co.uk/product/duo-kit-resin-tank/
The SprintRay Duo Kit combines groundbreaking technology with unparalleled efficiency to enable dual-material printing in a single print job. This innovation streamlines workflows, saves time, reduces resin waste, and enhances the production capabilities of dental professionals. By eliminating the need for material swaps mid-job, the Duo Kit transforms the way clinics and labs handle multi-material and multi-shade applications, ensuring greater accuracy, faster turnarounds, and an improved patient experience.https://sprintray.com/en-uk/
Dual-Material Printing
Combine two materials in a single print job, eliminating the need for material swaps.
Enhanced Workflow Efficiency
Reduce handling and cleanup time while increasing productivity.
Minimizes errors
No more mid-job material changes, ensuring consistent results.
New Swappable Resin Tanks
150mL Capacity
Individually Tracked
Rubber Lid
Stackable
New Print Platform
Hard Anodized
Unibody Design
Easy to Maintain
UPRGADE AND SAVE!! Get 10%off your total when you purchase the SprintRay Arch Kit Resin Tank together with the platform.
Introducing the all new SprintRay PRO 2 Arch Kit.
Pro 2 Arch Kit comes with the proprietary Optical Polish Technology, enabling users to 3d printed appliances with a pre-polished surface, reducing post -processing time significantly.
Streamline Workflow Efficiency
SprintRay PRO 2 3D Printer.
The SprintRay Arch Kit is designed to unlock the speed potential of SprintRay PRO 2 3D printers.
3D print 2 dental models in as little as 13 minutes, maximize resin usage, and provide more same-day care.
Built for Single-Patient Prints
The Arch Kit build platform features a powerful onboard heater and a hard anodized coating to resist corrosion and oxidation.
Reduce Resin Waste
The 125 ml capacity compact tank uses resin efficiently and heats up rapidly to form a perfect pair with the Arch Kit Build Platform.
3D Print More, Faster
3D print the most common dental appliances up to 2X faster without compromising quality or accuracy
Appliance Print Times
Digital Dentures
Standard Kit 110 mins
Arch Kit 70 mins
Implant Dentures
Standard Kit 35 mins
Arch Kit 20 mins
Night Guard
Standard Kit 45 mins
Arch Kit 22 mins
Dental Model
Standard Kit 25 mins
Arch Kit 12 mins
PLATFORM
Pro 2 Arch Kit Build Platform is a compact build platform that ensures faster printing. Made from hard anodized aluminum, this platform is designed for durability and precision and includes a powerful built-in heater. The 4.1”x2.9” print area can fit up to 2 full arches, making it perfect for various full arch applications such as models, night guards, surgical guides, full arch hybrids, and dentures. Must be used with the (SRI-0503047) Arch kit resin Tank.
RESIN TANK
SprintRay Pro 2 Arch Kit Resin Tank is a compact resin tank with a 150mL capacity. This tank ensures faster prints and optimal resin usage and rapid heat transfer for Pro 2 series printers. Must be used with the (SRI-0503046) Pro 2 Arch Kit Build Platform.https://sprintray.com/en-uk/3d-printing-products/partner-resins/
