SprintRay Resin Die Model BUY-MORE-PAY-LESS OFFER,

£15.95 OFF FOR EACH BOTTLE.

£15.95 OFF FOR EACH BOTTLE.

https://sprintray.com/en-uk/3d-printing-products/sprintray-resins/#tan2 x6 SprintRay Die and Model 2

SprintRay Die and Model 2 resin Tan or Greyhttps://sprintray.com/en-uk/3d-printing-products/partner-resins/

To qualify for £107 each bottle price 6 or more bottles must be order on check out. RRP UNIT PRICE £122.95 per bottle

SprintRay Die & Model 2 represents a big step forward in dental modelling materials. Our new colors mimic classic dental stone and feature almost no pigment settling, which means you can spend more time printing and less time mixing. Improved adhesion to the build plate is matched by an increase in flexural modulus and strength, providing higher success rates and a reduced chance of breakage.

A reduced odor improves the quality of life for 3D printing models for an overall experience that your practice staff will love. Plus, Die & Model 2 resins are easier to separate from thermoforming materials, saving time and labor for more efficient in-office fabrication workflows. With rapid, repeatable results that are easier than ever to use, Die & Model 2 is helping to bring dental 3D printing into dental practices everywhere.

SprintRay Die & Model 2 represents a big step forward in dental modelling
materials. Our new colors mimic classic dental stone and features almost no
pigment settling, which means you can spend more time printing and less
time mixing. Improved adhesion to the build plate is matched by an increase
in flexural modulus and strength, providing higher success rates and a
reduced chance of breakage.
A reduced odor improves the quality of life for 3D printing models for an
overall experience that your practice staff will love. Plus, Die & Model 2 resins
are easier to separate from thermoforming materials, saving time and labor
for more efficient in-office fabrication workflows. With rapid, repeatable
results that are easier than ever to use, Die & Model 2 is helping to bring dental
3D printing into dental practices everywhere.

SprintRay Retainer 3D Resin enables dentists to 3D print crystal-clear retainers, providing patients with same-day retainers. This advanced resin was developed in the SprintRay BioMaterial Innovation Lab as part of a fully integrated SprintRay digital workflow that includes AI retainer design, providing seamless end-to-end fabrication in under 60 minutes total.

Designed to be used exclusively with the all-new SprintRay NanoCure curing unit
Compatible with SprintRay Pro 2https://sprintray.com/en-uk/3d-printing-products/sprintray-resins/

THROUGHPUT MEETS PRECISION

SprintRay Pro 2 is a next-generation dental 3D printer that delivers unprecedented accuracy and throughput. With patent-pending Optical Panel technology and 385 nm UV-A light, Pro 2 is the most advanced 3D printer we’ve ever built.

Precision

Patent-pending 35 µm Optical Panel technology combined with 385 nm light engine puts Pro 2 at the forefront of 3D printing accuracy.

Throughput

SprintRay Pro 2 can 3D print 6+ full arch dental models in a single job or use the Arch Kit to print up to 2x faster. Now you’re in control of your production workflow.

Supported workflows

Pro 2 is the ultimate practice supercharger, supporting workflows across myriad specialties – from clear aligner production to hyper-precise hybrid dentures.

The most accurate SprintRay printer of all time

SprintRay Pro 2 is redesigned to be the most accurate 3D printer on the market. From refactored resin
profiles to the patent-pending Optical Panel, every decision we make is to improve your outcomes
across the 15+ indications our devices serve. With Pro 2, nothing has been left to chance.

NANO CURE

Maxed out Mechanicals

Long-wavelength light and heat create cross-linked chain reactions, maximizing the mechanical properties of your parts. Smart engineering ensures the entire volume is fully cured.

Biocompatibility

Fast Short-wavelength light delivers an intense blast that scatters on the surface of your parts, creating a perfect cure with no tackiness and full biocompatibility.

Shade Perfect

Because of its extremely short cure times, NanoCure produces restorations with shades closer than ever to your shade guide without sacrificing strength or biocompatibility.

Goodbye Nitrogen

The SprintRay Biomaterials Innovation Lab formulates resin that works in perfect tandem with our hardware. These photoinitiators and LEDs remove the need for nitrogen.

SprintRay APEX Base is a nanoceramic, biocompatible, FDA-cleared Class II resin designed for 3D printing removable denture bases. It leverages biomaterial innovation to elevate the 3D fabrication and repair of full and partial removable dentures and baseplates. Powered by proprietary NanoFusion™ technology and surpassing ISO high-impact standards, APEX Base is infused with the optimal amount of ceramic, excelling in fracture and wear resistance, outperforming competitor 3D printing and milled materials on multiple fronts. APEX Base features improved translucency for competitively aesthetic 3D printed dentures. Part of a fully integrated SprintRay digital workflow featuring on-demand, customized denture design services and an industry-leading 3D printing ecosystem.

Available in shades: Light Pink, Original Pink, Opaque Original Pink, Dark Reddish Pinkhttps://www.eurodontic.co.uk/product/sprintray-apex-base/

About SprintRay

Established 2014

SprintRay is a technology company that builds end-to-end 3D printing solutions for dental practices and laboratories. Because we are in charge of the design, manufacturing, and support of our products, we can provide full-stop additive manufacturing solutions that are both cutting-edge and user-friendly.https://sprintray.com/en-uk/

Dentistry as focal point

For us, finding and solving problems is a way of life. Our design and engineering choices are not just informed by the dental community, they are created in service to the community. We build our products so that they solve problems today, while being prepared for tomorrow.

Product expertise instead of product jumble

We’re here to make a carefully-curated selection of the best manufacturing tools the dental industry has ever seen. Our catalogue isn’t filled with dozens of products in search of solutions. For us to stamp our name on something, it must be carefully considered, targeted, and meticulously designed to meet your needs.

For the Next 100 Years of Dentistry

Our 3D printing products are born from the dental community. They are a collaboration between master designers, world-class dental professionals, and superlative engineers who operate in total alignment with a single goal: revolutionize dentistry by bringing affordable, easy, in-office 3D manufacturing to every dental practice in the world.

We Give Physical Form to Digital Technologies

Intraoral scanning, CAD/CAM design, digital design collaboration, virtual waxups, and many more contemporary dental technologies have changed the way dentistry is practiced. These powerful tools have helped clinicians improve care and efficiency the world.

SprintRay #1 in dental 3D Printring

MINISTAR S^®

The compact pressure moulding unit MINISTAR S® equipped with scanning technology: scanner reads the coded material, allowing programming of all important parameters such as heating time, temperature and cooling time. In other words: precise pressure moulding results are reached in record time thanks to the extremely fast, patented heater and working pressure of 4.0 bar, adjustable via pressure regulator. New generation equipped with user-friendly membrane keypad and large display. All operating parameters are monitored and indicated on the display.https://www.scheu-dental.com/en/products/laborgeraete/tiefziehtechnik/ministar-sr/3501

Eurodontic are the official agents for Scheu-Dental in the UK.

We offer free CPD training and support to our customers, as well as offering a machine repair and loan service.

For machine purchases, we ask for a 70% deposit via BACS. We will contact you to arrange this once you place the order.

The compact Scheu Ministar device is equipped with advanced scanning technology. The scanner reads the coded material, allowing programming of all important parameters such as heating time, temperature and cooling time.

A compressor is required to operate the Ministar.

In other words, ultra precise pressure moulding results are achieved in record time, thanks to the rapid, patented heater and working pressure of 4.0 bar, adjustable via pressure regulator. The new generation machines are equipped with user-friendly membrane keypad and large display. All operating parameters are monitored and indicated on the display.

Technical data

- Power: 230/115/100 V, 750 W
- Working pressure: 0.5 – 4.0 bar
- Dimensions (W × H × D): 500 × 210 × 400 mm
- Weight: 9 kgs
- 3 years warranty, 10 years availability of spare parts
- . compressor is recommended with an output greater than 4 bars of pressure, The Ministar S^® comes with airline and Euro male connection, you will need a Euro quick release coupling 1/4inch for your compressor.When you purchase a Bambi Compressor with Ministar S^® from Eurodontic save 5% and receive free installation.

Important

A manufacturer of medical devices must register with the MHRA (Medicines and Health Regulatory Agency) and must understand and comply with (MDR) Medical Device Regulations.

The regulations stipulate that appliances must be manufactured with acceptable materials and must be signed off by a GDC-registered person.

A manufacturing organisation requires a responsible person who is two years post-qualification and is competent in the area of appliance manufacture.

Eurodontic will be exhibiting at the North of England Dentistry Show 2026, Friday 13^th of February at the AO Arena in Manchester.

Looking foward to see you there!!

SprintRay #1 in dental 3D Printring

North of England – Updated

DIE AND MODEL 2 SPECIAL OFFER

Rapidly 3D Print High-contrast Dental Models

Improved flexural modulus and strength
Up to 10% faster print speeds
Print up to eight full arch models in just 15 minutes*
Fantastic color and finish that mimics dental stone
Easy to separate from thermoforming materials

£14.95 OFF EACH BOTTLE DIE AND MODEL 2 SPECIAL OFFER SprintRay Die & Model 2 represents a big step forward in dental modelling materials. Our new colors mimic classic dental stone and feature almost no pigment settling, which means you can spend more time printing and less time mixing. Improved adhesion to the build plate is matched by an increase in flexural modulus and strength, providing higher success rates and a reduced chance of breakage.

SprintRay Resin Die Model BUY-MORE-PAY-LESS OFFER

https://sprintray.com/en-uk/3d-printing-products/sprintray-resins/#tan2

About SprintRay

Established 2014

Dentistry as focal point

Product expertise instead of product jumble

For the Next 100 Years of Dentistry

We Give Physical Form to Digital Technologies

Provides efficient and flexible biomechanics. This appliance significantly enhances treatment capabilities and can be extremely effective in reducing treatment time, surgeries, and extractions. Appliances can be inserted chairside and loaded immediately.

http

Hands-On Courses with Patients

These courses are aimed at giving a personalised explanation to orthodontists and orthodontic labs, who want to expand their knowledge with anchoring treatment.

Each course involves 10 hours of participation, with the combination of theoretical and practical workshops.

Dr. Heinz Winsauer Orthodontic Office – Bregenz, Austria

Tiger Dental 2021 https://youtu.be/s42C5UDJN2o

https://www.eurodontic.co.uk/wp-content/uploads/2020/11/Tiger-Dental-course.pdf

We’ve been working hard on it for a couple of months now, and we’re now delighted to launch our new and improved Eurodontic online shop!

We’ve added 100s more of your favourite, must-have products and added user-friendly new categories to make it super easy to find the products you want.

We’ll be adding even more products to the shop over the coming weeks and months.

Take a look – we’d love to hear what you think!

Don’t have an account? Just visit the shop, add your chosen products to your basket and checkout. Our customer service team will then be in touch to set up your account and finish processing your order.

t Eurodontic, we don’t just talk the talk.

At Eurodontic, we’ve been supplying world-class products to dental professionals for over 35 years. We source the latest products and technology from the world’s leading suppliers, to keep you at the cutting edge of dentistry.

We offer a wide range of products for the manufacture of aligners, retainers, mouthguards and more. From SprintRay 3d printers and Ministar®/ Biostar® thermo-forming machines to resins and materials, all our products have been tried, tested and approved in our in-house laboratory.

Supply SCHEU-DENTAL, SprintRay, DEXIS™, PSM Medical and RMO®

Hands-on approach

We apply this hands-on approach throughout the sales process. We don’t just sell our equipment – we work hard to develop long-lasting relationships with our customers.

We aim to deliver outstanding service, both before and after your purchase, and you’ll also benefit from our expertise and experience in using the very products you’re buying.

That’s why some of our customers have been returning to us for over 35 years

The last couple of months have been difficult for everyone. We sincerely hope that our customers, suppliers and colleagues are all safe and well.

Having undergone a short period of closure, followed by a phased opening on a skeleton staff, we are delighted to say that Eurodontic is now fully operational again.

We’ve carried out a full risk assessment and taken all necessary measures to ensure the safety and wellbeing of all our staff and customers. We’re confident that we can now resume ‘business as usual’.

However, please be aware that due to our increased safety measures, there may be a short delay in getting your order to you. We will do our best to minimise this where possible.

If you have any questions or queries, don’t hesitate to get in touch with us. We’re looking forward to working with our lovely customers once again.

Andrea Johnson is Chair and a founding member of the charity Den-Tech, Orthodontic and maxillofacial laboratory manager at Montagu hospital, Mexborough and the current Chair of the Orthodontic Technicians Association (OTA).

We’re proud to be sponsoring her session at this year’s Dental Technology Conference, which takes place in Edinburgh on 27-28 September.

The session, titled ‘Under Pressure – Thermoforming Tips, Tricks and Advice’ will introduce a range of thermoforming techniques using SCHEU equipment and materials, which will be invaluable both for beginners and more experienced technicians alike.

In April 2019, Eurodontic had the privilege of arranging for Andrea to visit SCHEU’s HQ in Iserlohn, Germany.

Here’s what Andrea made of the visit…

‘SCHEU-DENTAL was founded in In 1926 and is still a family-run business. They develop very high quality dental products and services, including a large range of pressure-moulded appliances, sleep medicine and now 3D printing.

It was with this in mind that I embarked on this journey. I have a very well-loved, old and battered Biostar pressure moulding machine in my lab and quite frankly was looking forward to seeing first hand from the experts how this can be used to its maximum potential with the materials developed especially with it in mind.

I arrived in Iserlohn the evening before my scheduled day at SCHEU and was able to have a little wander around the town. It is a very lovely place and full of the character I have come to expect from the German towns I have visited. It has a very ‘olde world’ feel to it with cobbled streets and characteristic buildings cleverly mixed in with the new without spoiling the overall feel.

The following day was a real learning exercise. I was collected from my hotel in the morning by Martin Göllner who is SCHEU’s sales director. We drove the 10 minutes to the company where I was introduced to Martin’s colleague Antji who was my instructor for the day. I was very impressed by Martin and Antji’s English, it was certainly a huge amount better than my German and the hospitality of them both throughout the day was incredibly impressive.