SPRINTRAY MIDAS RESTORE
MIDAS RESTORE – PRE ORDER
CONTACT US FOR PRE ORDER: 01142766813 – [email protected]
If we could 3D Print Enamel, This is it.
SprintRay Midas Restore is a definitive restorative resin filled to more than 75% by weight with glass ceramic and zirconia — engineered for full-coverage crowns, inlays, onlays, and veneers. It holds 98% of its polish after 5,000 brushing cycles, resists wear five times better than SprintRay Ceramic Crown, and matches the translucency range of milled lithium disilicate. Scan, press, polish, deliver — in a single visit.
Midas Restore takes the opposite approach. Its resin matrix arrests cracks
rather than simply resisting them, and its flexural modulus sits closer to
dentin than to a glass ceramic. When adhesively bonded to remaining
tooth structure, the restored tooth distributes function as a single unit –
instead of concentrating stress at the interface.
Indicated for definitive full single crowns, definitive partial crowns
(inlays and onlays) in the anterior and posterior, and single veneers.
Available in five natural shades – A1, A2, A3, and B1 –
resin capsules are validated for use with Midas Digital Press.
SPRINTRAY MIDAS RESTORE TECHNICAL DATA https://www.eurodontic.co.uk/
Property
Biaxial flexural
strength
Flexural modulus
Surface hardness
Midas Restore
215 MPa max.
180 MPa mean
10.5 GPa max.
10.0 GPa mean
81.9 ± 6.4 HV
Test Method
ISO 6872, piston-on-three-balls
ISO 4049, 3-point
Vickers microhardness,
ISO-referenced protocol,
independently measured at the
University of Alabama at
Birmingham School of
Dentistry.
What It Means Clinically
Resistance to fracture under occlusal load. Crown HT 203
max/ 168 mean; Ceramic Crown 205 max / 170 mean.
Closer to dentin (17.5 ± 3.8 GPa*). A bonded restoration that flexes
with the tooth transfers load through the interface rather than concentrating stress at it. Crown HT 7.4 GPa; Ceramic Crown 5.8 GPa.
Statistically equivalent to a leading nanofilled direct composite,
and roughly double the hardness of previous-generation printed
restorative resins (20–39 HV). Contributes to wear resistance and
polish retention.
Regulatory Status
CE marked – Class IIa medical device under
Regulation (EU) 2017/745 (EU MDR)
FDA 510(k) – K260661 · Class II · 21 CFR 872.3690,
Tooth Shade Resin Material · Rx only
Composition
More than 75% filler by weight – a dual
filler system combining glass ceramic
and zirconia powder in a lightcurable methacrylate resin matrix.
Test conditions
Unless otherwise noted, all values were
measured on specimens pressed on the
Midas Digital Press and post-processed
per the validated SprintRay workflow.
SURFACE & OPTICAL
PHYSICAL & SAFETY
CLINICAL HANDLING NOTES
Property
Gloss retention
Wear resistance
Translucency
parameter (TP)
Shade and color
stability
Polishability
Midas Restore
98% of initial gloss at
5,000 cycles
5x SprintRay Ceramic
Crown; comparable
to a milled hybrid
ceramic
13.5 (shade A1)
Pass
Polish to final
What It Means Clinically
A surface that holds its polish through daily brushing
resists staining and biofilm accumulation.
Wear performance in the range of a milled restoration, and
five times that of our previous-generation definitive material.
• Milled lithium disilicate HT 13.9
• SprintRay Crown HT 13.4
• SprintRay Ceramic Crown 10.9 (varies by shade).
Shade does not change under accelerated aging.
Green state zirconia or hybrid ceramic polishing systems.
No glaze required.
Test Method
Simulated
toothbrush abrasion
in water.
Internal testing on specimens,
200,000 cycles. No ISO
standard exists for this
method.
Higher TP = more translucent.
All materials measured under
the same protocol.
ISO 10477, after irradiation
and water sorption
ISO 10477 surface finish
MECHANICAL
Midas Restore
22–24 µg/mm³ (limit <40)
1.0–2.5 µg/mm³ (limit <7.5)
Not detectable
Radiopaque –
equivalent to aluminum
Pass
Pass
What It Means Clinically
Dimensional and optical stability in the oral environment.
Resistance to dissolution in the oral environment.
No detectable residual methyl methacrylate.
Margins and recurrent caries are assessable radiographically.
A restoration only works if it stays attached. Measures how firmly
the material holds to the tooth once cemented. A crown that
debonds fails the patient just as surely as one that fractures.
Tested for tissue contact exceeding 30 days.
https://sprintray.com/
SPRINTRAY APEX BASEhttps://www.eurodontic.co.uk/product/sprintray-apex-base/
SprintRay APEX Base is a nanoceramic, biocompatible, FDA-cleared Class II resin designed for 3D printing removable denture bases. It leverages biomaterial innovation to elevate the 3D fabrication and repair of full and partial removable dentures and baseplates. Powered by proprietary NanoFusion™ technology and surpassing ISO high-impact standards, APEX Base is infused with the optimal amount of ceramic, excelling in fracture and wear resistance, outperforming competitor 3D printing and milled materials on multiple fronts. APEX Base features improved translucency for competitively aesthetic 3D printed dentures. Part of a fully integrated SprintRay digital workflow featuring on-demand, customized denture design services and an industry-leading 3D printing ecosystem.
Available in shades: Light Pink, Original Pink, Opaque Original Pink, Dark Reddish Pink
bout SprintRay
Established 2014
SprintRay is a technology company that builds end-to-end 3D printing solutions for dental practices and laboratories. Because we are in charge of the design, manufacturing, and support of our products, we can provide full-stop additive manufacturing solutions that are both cutting-edge and user-friendly.
Dentistry as focal point
For us, finding and solving problems is a way of life. Our design and engineering choices are not just informed by the dental community, they are created in service to the community. We build our products so that they solve problems today, while being prepared for tomorrow.
Product expertise instead of product jumble
We’re here to make a carefully-curated selection of the best manufacturing tools the dental industry has ever seen. Our catalogue isn’t filled with dozens of products in search of solutions. For us to stamp our name on something, it must be carefully considered, targeted, and meticulously designed to meet your needs.
For the Next 100 Years of Dentistry
Our 3D printing products are born from the dental community. They are a collaboration between master designers, world-class dental professionals, and superlative engineers who operate in total alignment with a single goal: revolutionize dentistry by bringing affordable, easy, in-office 3D manufacturing to every dental practice in the world.
We Give Physical Form to Digital Technologies
Intraoral scanning, CAD/CAM design, digital design collaboration, virtual waxups, and many more contemporary dental technologies have changed the way dentistry is practiced. These powerful tools have helped clinicians improve care and efficiency the world.https://sprintray.com/en-uk/3d-printing-products/sprintray-resins/#tan2
