Multi Unit Capsule – Pre Order
Multi Unit Capsule
CONTACT US FOR PRE ORDER: 01142766813 – [email protected] https://www.eurodontic.co.uk/login/
The Multi Unit Capsule features more than 3x the build area of the Single Unit Capsule and is designed for large-format restorations.
Multi Unit Capsule -Key Features
• Expanded build area
• Supports multi-unit and arch-based cases
• Same DPS high-viscosity capability
Multi Unit Capsule Common Applications
• Smile mock-ups
• Front six restorations
• Split front eight restorations
• Multi-unit bridges
• Temporary bridges
• Temporary implant bridges
The Multi Unit Capsule is ideal for extended restorations and bridge fabrication.
• Use Digital Press Stereolithography
• Support highly-filled composite materials
• Require no resin tanks or reusable build platforms
• Use barcode scanning for automated setup
The choice depends on restoration size, not material capability.
| CrownsFull contour crowns with lifelike aesthetics and mechanicals thanks to extremely high filler content✔️Posterior crowns ✔️Anterior crowns ✔️Implant crownsAI DESIGN AVAILABLE | Smile Mock upPrint a full trial smile in a single print job, or split the arch into two pieces for a quick snap-on smile ✔️Front Six ✔️Split Front Eight | Inlay & OnlaysComplex shapes print with pixel-perfect accuracy on Midas – fabricate up to 2 inlays per capsule✔️Fillings ✔️Onlays ✔️InlaysAI DESIGN AVAILABLE |
| Implant CrownsPerfect screw channel and ceramic strength make Midas a natural choice for implant restorations✔️Screw Retained✔️Cemented | Multi Unit BridgeWith its large print area, the Multi Unit Capsule is perfect for large bridges & other restorative work✔️Temporary Bridge ✔️Temporary Implant Bridge | VeneersPrint up to 3 incredibly thin, strong veneers per capsule for minimally invasive cosmetics✔️No-prep veneers ✔️Prepped veneers |
The Multi Unit Capsule features more than 3x the build area of the Single Unit Capsule and is designed for large-format restorations.
Midas Capsules are available for multiple restorative materials, including:
• Crown HT
• Ceramic Crown
• OnX Tough 2
• Digital Temp
Material availability may vary by capsule format and indication.
Overview
Midas uses Digital Press Stereolithography (DPS), a patented printing method that replaces traditional resin bottles, resin tanks, and reusable build platforms with a sealed Resin Capsule. Each capsule contains the build platform, material, and press mechanism in one single-use unit.
This capsule-based workflow eliminates exposed resin handling while enabling highly-filled, high-viscosity composite printing for chairside restorations.https://sprintray.com/
SprintRay Nano Series – available for pre order.
CONTACT US FOR PRE ORDER: 01142766813 – [email protected]
What Is the Nano Series?
The Nano Series is a chairside production workflow built for one-case-at-a-time dentistry. It brings together three new systems — NanoPrint, NanoWash and NanoCure — into a single, intelligently connected print, wash and cure workflow.
Together, NanoPrint, NanoWash and NanoCure fit within 30 in. of counter space, bringing a complete production sequence into a footprint designed for everyday chairside use.
Nano Series supports more than 16 indications and is validated across SprintRay’s restorative materials, bringing professional-grade production capability into a footprint sized for everyday chairside use — without compromising workflow or clinical versatility.
One thing is important to understand from the start: Nano Series isn’t a scaled-down version of SprintRay’s existing production systems. It’s a workflow engineered specifically around single-case chairside production.
Why Nano Series Is Built for Right-Sized Production
Most dental 3D printing workflows are designed around batch production — larger build volumes, multi-case runs, and post-processing steps that assume volume.
That’s not how most chairside cases work.
Nano Series approaches production differently. Rather than asking practices to manage full-scale production equipment for single-unit cases, Nano Series is purpose-built around the reality of one-case-at-a-time dentistry — without asking clinicians to sacrifice the connected, validated workflow they’d expect from a larger system.
Cloud connectivity, along with technologies like AutoPrint and Job Handoff, moves cases seamlessly from print through post-processing, so the case keeps moving even as it changes hands between steps.
The important distinction isn’t simply that Nano Series is smaller. It’s what the smaller footprint is engineered to accomplish once it’s part of a practice’s daily workflow.
What This Means Clinically
A chairside production system needs to do more than fit on a counter.
It needs to move a case through print, wash and cure efficiently without added handling, support the range of indications a practice actually sees day to day, and stay validated against the materials clinicians already trust.
Nano Series was engineered around those realities.
Right-Sized Without Compromise
Supporting more than 16 indications, Nano Series is built to handle the broad range of chairside cases within a compact production footprint.
Connected by Design
AutoPrint and Job Handoff help a case move through the print, wash and cure sequence automatically, reducing the manual handoffs that typically slow chairside workflows down.
Validated Materials
Nano Series is validated across SprintRay’s restorative material lineup, giving practices access to a broad portfolio across the Nano workflow.
Bringing Scanning Into the Workflow: Foundation and ScanOS
Nano Series addresses production. Foundation and ScanOS address what happens before it.
Foundation is the first intraoral scanner built for ScanOS, extending SprintRay’s connected workflow all the way back to the start of the digital case.
ScanOS makes scanning a native part of the SprintRay Workspace environment — alongside Design Suite and Print Setup. Rather than moving between separate scanner software, separate accounts and manual file transfers, clinicians can move a single case through scan, design, print setup and production within one unified cloud connected digital environment.
That matters because the biggest source of friction in digital workflows is rarely any one step. It’s what happens at the seams between steps — the export, the upload, the format conversion, the second login. ScanOS is designed to remove those seams.
From Scan to Delivery, in One Connected System
Despite the range of technology behind these announcements, the clinical workflow is intentionally straightforward.
Scan the case on Foundation. Move it through Design and Print Setup within ScanOS. Produce it chairside on Nano Series, with AutoPrint and Job Handoff carrying the case through print, wash and cure. Then deliver.
The goal is a connected workflow in which clinicians spend less time moving between technologies and more time focused on the case itself.
Right-sized, per Patient.
For ten years, SprintRay has been advancing chairside dental 3D printing. Now, we’ve taken everything we’ve learned and brought it together in a complete, compact workflow designed to make professional 3D printing easier to bring into more practices, in under 76 cm counter space.
- NanoPrint – Right-sized, per patient. Print, wash and cure for single-patient workflows, in the most compact system we have ever built. 40
- NanoWash – Six minutes. Sealed. Bone dry after one wash and dry cycle, right on the build platform.
- NanoCure – The one that started “Nano” – dual-wavelength technology for optimized biocompatibility and mechanical properties, no nitrogen needed.
ONX TOUGH 2
Introducing SprintRay OnX Tough 2, a groundbreaking dental 3D printing resin for use in creating fixed hybrid dentures. This resin leverages the cutting-edge NanoFusion™ technology, which set a new industry
standard by offering exceptional durability and visual quality.https://www.eurodontic.co.uk/product/onx-tough-2/
he result is a remarkably natural appearance that closely resembles natural enamel.
OnX Tough 2 empowers dental professionals to fabricate fixed hybrids
chairside while rivaling milled PMMA material qualities – all without extra
mixing or rolling. OnX Tough 2 ensures unmatched strength and
high-quality aesthetics, streamlining the process for increased efficiency
and fewer appointments.
500g bottles available now in: A1, A2, B1, Bleach and Hollywood White.
Full Arch Implant Rehabilitation
Rehabilitation of full arch edentulous patients was the primary reason and indication
for dental implants back in 1977 when Branemark introduced the osseointegration
process and endosseous dental implants.
Rehabilitation of patients with the need for full arch implant supported prosthesis
(often called hybrid prosthesis) has been growing rapidly among dental practitioners
and is demanded by many patients nationwide.
1
This treatment enables restoration of
function and aesthetics in very reasonable timeframes. The current trend in implant
rehabilitations is to develop materials to improve the aesthetics and mechanical
properties, reduce treatment time, and ultimately simplify treatment procedures.2
Conventional Methods of Hybrid Denture Fabrication
Conventionally, the provisional prosthesis delivered to patients during the healing
period would be fabricated by connecting temporary cylinders to a premade
PMMA based prosthesis. This procedure, which is performed either on the day of
surgery in case of immediate loading, or at a later time when the implants are fully
osseointegrated. In case of delayed loading, it is time consuming and can cause
discomfort for patients. However, introduction of CAD/CAM in dentistry and
improvements in digital dentistry workflows has enabled clinicians to reduce the
postoperative complications, improve the patient satisfaction, and provide more
predictable treatment outcome.
3
To date, the search for optimum material is
ongoing and constant research and innovation has created very unique materials
applicable for full arch implant rehabilitations.
Flexural Strength and Flexural Modulus
Objective
This study evaluated the flexural strength and flexural modulus of the samples
printed with available dental 3D printing hybrid denture materials in the market.
This study provides a valuable insight into the mechanical properties of these
3D printed resins.
Materials and Methods
For this evaluation, bars with 4 mm thickness, 12.7 mm width, and 125 mm length
were fabricated according to the ASTM D790. For this test the support span was
set at 64 mm. Moreover, bars with 2 mm thickness, 2 mm width, and 25 mm length
dimensions were fabricated according to the ISO 4049 standard. For this test the
support span was set at 20 mm. The materials printed for this study were OnX Tough
2 (SprintRay), Flexcera Smile Ultra Plus (Desktop Health), Rodin Sculpture (Pac-Dent),
and Trusana (Myerson). All samples were printed and cured according to the
manufacturer’s IFU. https://sprintray.com/
Build Platform and Resin tank are purchase separately, please select both for SprintRay Crown Kit.https://www.eurodontic.co.uk/product/sprintray-crown-resin/
- The Crown Kit consists of a compact build platform and a specialized tank, allowing less material use and fast printing of up to 6 crowns in under 15 minutes.
- The Crown Kit is compatible with our SprintRay Crown resin, allowing a workflow from data acquisition to patient delivery in 45 minutes – making this the first real 3D printing Chairside solution in the world.
- AI Crown Design Services in Europe. With artificial intelligence, customers simply need to upload their scan in order to receive a ready-to-print STL file of a posterior crown within a few minutes. This makes the workflow even more frictionless. Sprintray, already serve all customers who design themselves.
The SprintRay Pro S Crown Kit is the first 3D printing solution designed specifically to fabricate ceramic restorations. With the Crown Kit, you can produce up to 6 single unit crowns in 10 minutes, all while reducing resin waste. In this bundle:
– SprintRay Crown Build Platform
A new, compact build platform with a hard anodized aluminum surface and powerful onboard heater. Its 1.5” x 2” build area can fit up to 6 single unit crowns.
– SprintRay Crown Resin Tank
With a 50mL capacity, the compact tank uses resin efficiently and heats up rapidly. Works with the Pro S to track resin usage and lifetime, expected up to 15 liters.
A new, compact resin tank for SprintRay Pro S printers designed for 3D printing ceramic crowns. Features a 50mL capacity for efficient resin usage and rapid heat transfer. Works in tandem with the Pro S printer to track resin usage and tank lifetime. The Crown Kit Resin Tank has an expected life of up to 15 liters of resin. Must be used with the Crown Kit Build Platform .
SprintRay Crown by BEGO® is a ceramic filled hybrid material for 3D printing single crowns, inlays, onlay, and veneers. This material is easy to finish and polish using traditional methods, and features excellent aesthetics to blend with existing teeth.
High strength and resistance to wear make SprintRay Crown by BEGO® a go-to material for restorative 3D printing. And because SprintRay Crown by BEGO® is FDA 510(k) cleared and fulfills all the requirements for a Class II medical device, you can place with confidence.
Crown is available in seven shades: A1, A2, A3, B1, B3, C2, and D3. Available for sale in the US, EU, UK, and EFTA.
- Biocompatible, FDA 510(k) cleared and fulfills all the requirements for a Class II medical device
- Versatile: use as a single crown on natural tooth or abutment, as an inlay, onlay or veneer
- Very low water absorption reduces the tendency to age while a smooth surface means low plaque accumulationhttps://www.eurodontic.co.uk/product/sprintray-crown-resin/
Final-003-EU-ENG-CERAMIC CROWN KIT-Brochure_View_
PRINTRAY MIDAS + NANOCURE £11, 150.00 https://www.eurodontic.co.uk/product/sprintray-midas-nanocure/
SPRINTRAY MIDAS + NANOCURE MIDAS BUNDLE OFFER
Save more with Eurodontic – bundle the SprintRay Midas and Nano Cure for an exclusive deal. For more information : [email protected]
Sprintray Midas features
3D Printing Technology
Viscosity-agnostic Digital Press Stereolithography (DPS)
Continuous pressurized printing system
Advanced cure depth control
Resin Curing Unit
385 nm UV-A LED
SprintRay custom-built UV projector
Factory calibrated for light uniformity and intensity
Minimum Feature Size
45 µm (XY Resolution)
Print Speed
Print up to 3 capsules in less than 10 minutes
Print Glass
Heated glass printing surface
3-capsule max capacity
Removable print template
Easy to clean with IPA and glass cleaner
Resin Capsule
Print Volume (Per capsule)
15 mm diameter
20 mm height
Resin Volume (Per capsule)
4 mL of resin
Connectivity
2.4 and 5 GHz Wi-Fi chipset
Local network via Wi-Fi b/g/n
Local network via Ethernet cable
User Controls
7” glass touchscreen
Direct print via front-facing USB-C port
Android-based PrintOS onboard software
8-core onboard computer
Power Requirement
100-240V, 50-60Hz, 140 watts
Operating Temperature Range 70 – 85°F (21 – 29°C)
Unit Dimensions
(W x D x H)
8 x 8 x 14.5 in.
20 x 20 x 37 cm
Shipping Dimensions & Weight
13 x 18.5 x 14 in.
33 x 47 x 35.5 cm
24 lb.
11 kg
SprintRay NanoCure
NanoCure is host to a triple-threat of technologies in a compact form factor. Expand your capacity while improving speed to care without losing counter space.
- Enables Current and Future BioMaterials Innovations
- Office Space Saver – 50% smaller than ProCure 2
- Easy to Use Touchscreen with WiFi connectivity and Automatic Updates
- Dual Wavelength 365nm and 385nm for maximum biocompatibility
- Up to 4 full arch models, 8 quads models
- Nitrogen free
- Powerful instant heater
Speed
Post cure your prints in just
a few minutes with no need for nitrogen tanks
Power
Maximize mechanical properties
with 365+385 nm LEDs and smart
thermal management
Chemistry
Unlock a whole new
generation of material
chemistry for digital dentistry
Prosthetics
Cemented Restorations: 5 mins
Hybrid Dentures: 5 mins
Conventional Dentures: 15 mins
Orthodontics
Models for Aligners: 2 mins
Models for Retainers: 2 mins
IDB Trays: 2 mins
General Dentistry
Night Guards: 4 mins
Surgical Guides: 3 mins
Dental Models: 2 mins
Maxed out Mechanicals
Long-wavelength light and heat create
cross-linked reactions, maximizing the
mechanical properties of your appliances.
Shade Perfect
NanoCure produces restorations with
shades closer than ever to your shade
guide, helping meet patient expectations.
Biocompatibility, Fast
Short-wavelength light scatters across the
surface of your parts to quickly cure for
maximum biocompatibility, every time.
Goodbye, Nitrogen
Our Biomaterials Lab formulates resin that
works in perfect harmony with our hardware,
eliminating the need for nitrogenhttps://sprintray.com/en-uk/
SprintRay Midas £8,500.00https://www.eurodontic.co.uk/product/sprintray-midas/
CHAIRSIDE RESTORATIONS HAVE NEVER BEEN
SMART AND SIMPLE
SprintRay Midas is the ultimate chairside restoration solution. It uses patented Digital Press Stereolithography (DPS) technology and an innovative capsule system to make producing crowns, inlays, onlays and veneers as easy as using your coffee machine. When you buy Midas, you’ll unlock access to AI Studio and unlimited AI designs for one year.
- Fast – print up to 3 full-contour crowns, 6 inlays/onlays or 9 veneers in less than 10 minutes
- Easy to use – £8,500.00 Midas guides users intuitively from scan upload to design and fabrication. It’s easy to use, clean and maintain.
- Revolutionary – patented DPS and capsule technology allow Midas to print without viscosity limitations, including highly filled composites for future biomaterial innovation.
SprintRay Midas Features
3D Printing Technology
Viscosity-agnostic Digital Press Stereolithography (DPS)
Continuous pressurized printing system
Advanced cure depth control
Resin Curing Unit
385 nm UV-A LED
SprintRay custom-built UV projector
Factory calibrated for light uniformity and intensity
Minimum Feature Size
45 µm (XY Resolution)
Print Speed
Print up to 3 capsules in less than 10 minutes
Print Glass
Heated glass printing surface
3-capsule max capacity
Removable print template
Easy to clean with IPA and glass cleaner
Resin Capsule
Print Volume (Per capsule)
15 mm diameter
20 mm height
Resin Volume (Per capsule)
4 mL of resin
Connectivity
2.4 and 5 GHz Wi-Fi chipset
Local network via Wi-Fi b/g/n
Local network via Ethernet cable
User Controls
7” glass touchscreen
Direct print via front-facing USB-C port
Android-based PrintOS onboard software
8-core onboard computer
Power Requirement
100-240V, 50-60Hz, 140 watts
Operating Temperature Range 70 – 85°F (21 – 29°C)
Unit Dimensions
(W x D x H)
8 x 8 x 14.5 in.
20 x 20 x 37 cm
Shipping Dimensions & Weight
13 x 18.5 x 14 in.
33 x 47 x 35.5 cm
24 lb.
11 kg https://sprintray.com/en-uk/3d-printing-products/sprintray-resins/#tan2
PRO 2 THROUGHPUT MEETS PRECISION https://www.eurodontic.co.uk/
SprintRay Pro 2 is a next-generation dental 3D printer that delivers unprecedented accuracy and throughput. With patent-pending Optical Panel technology and 385 nm UV-A light, Pro 2 is the most advanced 3D printer we’ve ever built.
Precision
Patent-pending 35 µm Optical Panel technology combined with 385 nm light engine puts Pro 2 at the forefront of 3D printing accuracy.
Throughput
SprintRay Pro 2 can 3D print 6+ full arch dental models in a single job or use the Arch Kit to print up to 2x faster. Now you’re in control of your production workflow.
Supported workflows
Pro 2 is the ultimate practice supercharger, supporting workflows across myriad specialties – from clear aligner production to hyper-precise hybrid dentures.
The most accurate SprintRay printer of all time
SprintRay Pro 2 is redesigned to be the most accurate 3D printer on the market. From refactored resin
profiles to the patent-pending Optical Panel, every decision we make is to improve your outcomes
across the 15+ indications our devices serve. With Pro 2, nothing has been left to chance.
SprintRay NanoCure
NanoCure is host to a triple-threat of technologies in a compact form factor. Expand your capacity while improving speed to care without losing counter space.
- Enables Current and Future BioMaterials Innovations
- Office Space Saver – 50% smaller than ProCure 2
- Easy to Use Touchscreen with WiFi connectivity and Automatic Updates
- Dual Wavelength 365nm and 385nm for maximum biocompatibility
- Up to 4 full arch models, 8 quads models
- Nitrogen free
- Powerful instant heater
SprintRay New ProWash S
cleans and dries your 3D printed dental models in just 9 minutes. Designed to be fast, reliable, and connected, SprintRay raises the bar with the best cleaning system in 3D printing.
Solvent, Managed – Guided maintenance helps maximize and recycle IPA
Big Screen, Big Power – A 5” touchscreen helps streamline your everyday workflow
Wash Your Way – Create custom cleaning cycles for maximum workflow control
3X Drying Performance – A drying fan channels air directly into the wash chamber to prepare parts for curing.
Automatic Updates – Receive software and wash profile updates automatically https://sprintray.com/en-uk/3d-printing-products/sprintray-resins/#tan2
SPRINTRAY CERAMIC CROWN CAPSULES https://www.eurodontic.co.uk/product/ceramic-crown-capsules/
Each single-unit SPRINTRAY CERAMIC CROWN CAPSULES can produce up to 1 crown, 2 inlays/onlays, or 3 veneers in ca. 10 minutes. The capsules integrate the build platform, tank, and material into a single unit, simplifying the 3D printing process for dental professionals.
- Ceramic Crown MIDAS CAPSULE – Class IIa and MDR cleared for use in 3D printing definitive individual and fixed full single crowns, definitive partial crowns in the front and posterior area, individual and fixed single veneers.
Stress-free, chairside.
The world’s first digital restoration press
and the simplest and smartest method
of 3D printing dental restorations.
Patented Digital Press
Stereolithography (DPS)
Midas is an all-new solution for chairside
restorations. Digital Press Stereolithography
combines the tank, resin, and platform into
a single capsule, allowing it to print with
materials that are more viscous than
conventional 3D printers.
Print a range of restorations
in 10 minutes
Midas Capsule
OR OR 9 63
Combination of applications across all 3 capsules
Design In Minutes With AI Studio
AI Studio combines the convenience of AI design with the
versatility of CAD to create a simple, cloud-based design
suite. Designing a restoration with Studio is easy for anyone,
while customization options like margin and
adaptation adjustments help create a perfect fit.
When you buy Midas, you’ll unlock access to
AI Studio and unlimited AI designs for one year.https://sprintray.com/en-uk/
Fast
First-ever digital press
Digital Press Stereolithography (DPS) lets you 3D print highly-filled composite restorations in minutes
Easy
AI design, zero upkeep
Midas AI Studio generates AI designs you can customize, then easily print in just a few steps
Revolutionary
Viscosity agnostic
Midas is immune to resin viscosity, supercharging the future of Biomaterial Innovation for highly-filled composites
Meet the New King of Chairside
The most revolutionary 3D printing tech ever to reach dentistry
Midas uses Digital Press Stereolithography, a patent-pending printing method that replaces the resin, tank, and build platform with a Resin Capsule. This advancement allows Midas to print with highly filled resins that are too viscous to use on a conventional 3D printer.
SprintRay Midas £8,500.00 https://www.eurodontic.co.uk/product/sprintray-midas/
CHAIRSIDE RESTORATIONS HAVE NEVER BEEN
SMART AND SIMPLE
SprintRay Midas is the ultimate chairside restoration solution. It uses patented Digital Press Stereolithography (DPS) technology and an innovative capsule system to make producing crowns, inlays, onlays and veneers as easy as using your coffee machine. When you buy Midas, you’ll unlock access to AI Studio and unlimited AI designs for one year.
- Fast – print up to 3 full-contour crowns, 6 inlays/onlays or 9 veneers in less than 10 minutes
- Easy to use – Midas guides users intuitively from scan upload to design and fabrication. It’s easy to use, clean and maintain.
- Revolutionary – patented DPS and capsule technology allow Midas to print without viscosity limitations, including highly filled composites for future biomaterial innovation.
SprintRay Midas Features
3D Printing Technology
Viscosity-agnostic Digital Press Stereolithography (DPS)
Continuous pressurized printing system
Advanced cure depth control
Resin Curing Unit
385 nm UV-A LED
SprintRay custom-built UV projector
Factory calibrated for light uniformity and intensity
Minimum Feature Size
45 µm (XY Resolution)
Print Speed
Print up to 3 capsules in less than 10 minutes
Print Glass
Heated glass printing surface
3-capsule max capacity
Removable print template
Easy to clean with IPA and glass cleaner
Resin Capsule
Print Volume (Per capsule)
15 mm diameter
20 mm height
Resin Volume (Per capsule)
4 mL of resin
Connectivity
2.4 and 5 GHz Wi-Fi chipset
Local network via Wi-Fi b/g/n
Local network via Ethernet cable
User Controls
7” glass touchscreen
Direct print via front-facing USB-C port
Android-based PrintOS onboard software
8-core onboard computer
Power Requirement
100-240V, 50-60Hz, 140 watts
Operating Temperature Range 70 – 85°F (21 – 29°C)
Unit Dimensions
(W x D x H)
8 x 8 x 14.5 in.
20 x 20 x 37 cm
Shipping Dimensions & Weight
13 x 18.5 x 14 in.
33 x 47 x 35.5 cm
24 lb.
11 kg https://sprintray.com/en-uk/
Contact Us for more information : [email protected]
Sprintray Midas featureshttps://www.eurodontic.co.uk/product/sprintray-midas-nanocure/
3D Printing Technology
Viscosity-agnostic Digital Press Stereolithography (DPS)
Continuous pressurized printing system
Advanced cure depth control
Resin Curing Unit
385 nm UV-A LED
SprintRay custom-built UV projector
Factory calibrated for light uniformity and intensity
Minimum Feature Size
45 µm (XY Resolution)
Print Speed
Print up to 3 capsules in less than 10 minutes
Print Glass
Heated glass printing surface
3-capsule max capacity
Removable print template
Easy to clean with IPA and glass cleaner
Resin Capsule
Print Volume (Per capsule)
15 mm diameter
20 mm height
Resin Volume (Per capsule)
4 mL of resin
Connectivity
2.4 and 5 GHz Wi-Fi chipset
Local network via Wi-Fi b/g/n
Local network via Ethernet cable
User Controls
7” glass touchscreen
Direct print via front-facing USB-C port
Android-based PrintOS onboard software
8-core onboard computer
Power Requirement
100-240V, 50-60Hz, 140 watts
Operating Temperature Range 70 – 85°F (21 – 29°C)
Unit Dimensions
(W x D x H)
8 x 8 x 14.5 in.
20 x 20 x 37 cm
Shipping Dimensions & Weight
13 x 18.5 x 14 in.
33 x 47 x 35.5 cm
24 lb.
11 kg
SprintRay NanoCure
NanoCure is host to a triple-threat of technologies in a compact form factor. Expand your capacity while improving speed to care without losing counter space.
- Enables Current and Future BioMaterials Innovations
- Office Space Saver – 50% smaller than ProCure 2
- Easy to Use Touchscreen with WiFi connectivity and Automatic Updates
- Dual Wavelength 365nm and 385nm for maximum biocompatibility
- Up to 4 full arch models, 8 quads models
- Nitrogen free
- Powerful instant heater
Speed
Post cure your prints in just
a few minutes with no need for nitrogen tanks
Power
Maximize mechanical properties
with 365+385 nm LEDs and smart
thermal management
Chemistry
Unlock a whole new
generation of material
chemistry for digital dentistry
Prosthetics
Cemented Restorations: 5 mins
Hybrid Dentures: 5 mins
Conventional Dentures: 15 mins
Orthodontics
Models for Aligners: 2 mins
Models for Retainers: 2 mins
IDB Trays: 2 mins
General Dentistry
Night Guards: 4 mins
Surgical Guides: 3 mins
Dental Models: 2 mins
Maxed out Mechanicals
Long-wavelength light and heat create
cross-linked reactions, maximizing the
mechanical properties of your appliances.
Shade Perfect
NanoCure produces restorations with
shades closer than ever to your shade
guide, helping meet patient expectations.
Biocompatibility, Fast
Short-wavelength light scatters across the
surface of your parts to quickly cure for
maximum biocompatibility, every time.
Goodbye, Nitrogen
Our Biomaterials Lab formulates resin that
works in perfect harmony with our hardware,
eliminating the need for nitrogen.https://sprintray.com/en-uk/?mtm_campaign=Sprintray%20UK&gad_source=1&gad_campaignid=16871808918&gbraid=0AAAAAodWiif-0cTqKnzkWOs32brap2y2A&gclid=CjwKCAjwtIfPBhAzEiwAv9RTJsF-tQuvWB4AGeOidySsscJSRuWBJ0WOXETyzJSatObhDC4mzcX68xoCPc8QAvD_BwE
SPRINTRAY MIDAS + NANOCURE MIDAS BUNDLE OFFER
OnX Tough 2 empowers dental professionals to fabricate fixed hybrids
chairside while rivaling milled PMMA material qualities – all without extra
mixing or rolling. OnX Tough 2 ensures unmatched strength🏋 and
high-quality aesthetics, streamlining the process for increased efficiency
and fewer appointments.🔥🎰ull Arch Implant Rehabilitation
Rehabilitation of full arch edentulous patients was the primary reason and indication
for dental implants back in 1977 when Branemark introduced the osseointegration
process and endosseous dental implants.
Rehabilitation of patients with the need for full arch implant supported prosthesis
(often called hybrid prosthesis) has been growing rapidly among dental practitioners
and is demanded by many patients nationwide.
1
This treatment enables restoration of
function and aesthetics in very reasonable timeframes. The current trend in implant
rehabilitations is to develop materials to improve the aesthetics and mechanical
properties, reduce treatment time, and ultimately simplify treatment procedures.2
Conventional Methods of Hybrid Denture Fabrication
Conventionally, the provisional prosthesis delivered to patients during the healing
period would be fabricated by connecting temporary cylinders to a premade
PMMA based prosthesis. This procedure, which is performed either on the day of
surgery in case of immediate loading, or at a later time when the implants are fully
osseointegrated. In case of delayed loading, it is time consuming and can cause
discomfort for patients. However, introduction of CAD/CAM in dentistry and
improvements in digital dentistry workflows has enabled clinicians to reduce the
postoperative complications, improve the patient satisfaction, and provide more
predictable treatment outcome.
3
To date, the search for optimum material is
ongoing and constant research and innovation has created very unique materials
applicable for full arch implant rehabilitations.
Flexural Strength and Flexural Modulus
Objective
This study evaluated the flexural strength and flexural modulus of the samples
printed with available dental 3D printing hybrid denture materials in the market.
This study provides a valuable insight into the mechanical properties of these
3D printed resins.
Materials and Methods
For this evaluation, bars with 4 mm thickness, 12.7 mm width, and 125 mm length
were fabricated according to the ASTM D790. For this test the support span was
set at 64 mm. Moreover, bars with 2 mm thickness, 2 mm width, and 25 mm length
dimensions were fabricated according to the ISO 4049 standard. For this test the
support span was set at 20 mm. The materials printed for this study were OnX Tough
2 (SprintRay), Flexcera Smile Ultra Plus (Desktop Health), Rodin Sculpture (Pac-Dent),
and Trusana (Myerson). All samples were printed and cured according to the
manufacturer’s IFU.
https://www.eurodontic.co.uk/product-category/cad-cam/sprintray/sprintray-compatible-resins
CHAIRSIDE RESTORATIONS HAVE NEVER BEEN
SMART AND SIMPLE
SprintRay Midas is the ultimate chairside restoration solution. It uses patented Digital Press Stereolithography (DPS) technology and an innovative capsule system to make producing crowns, inlays, onlays and veneers as easy as using your coffee machine. When you buy Midas, you’ll unlock access to AI Studio and unlimited AI designs for one year.
- Fast – print up to 3 full-contour crowns, 6 inlays/onlays or 9 veneers in less than 10 minutes
- Easy to use – Midas guides users intuitively from scan upload to design and fabrication. It’s easy to use, clean and maintain.
- Revolutionary – patented DPS and capsule technology allow Midas to print without viscosity limitations, including highly filled composites for future biomaterial innovation.https://sprintray.com/en-uk/midas-dental-restoratives/
3D Printing Technology
Viscosity-agnostic Digital Press Stereolithography (DPS)
Continuous pressurized printing system
Advanced cure depth control
Resin Curing Unit
385 nm UV-A LED
SprintRay custom-built UV projector
Factory calibrated for light uniformity and intensity
Minimum Feature Size
45 µm (XY Resolution)
Print Speed
Print up to 3 capsules in less than 10 minutes
Print Glass
Heated glass printing surface
3-capsule max capacity
Removable print template
Easy to clean with IPA and glass cleaner
Resin Capsule
Print Volume (Per capsule)
15 mm diameter
20 mm height
Resin Volume (Per capsule)
4 mL of resin
Connectivity
2.4 and 5 GHz Wi-Fi chipset
Local network via Wi-Fi b/g/n
Local network via Ethernet cable
User Controls
7” glass touchscreen
Direct print via front-facing USB-C port
Android-based PrintOS onboard software
8-core onboard computer
Power Requirement
100-240V, 50-60Hz, 140 watts
Operating Temperature Range 70 – 85°F (21 – 29°C)
Unit Dimensions
(W x D x H)
8 x 8 x 14.5 in.
20 x 20 x 37 cm
Shipping Dimensions & Weight
13 x 18.5 x 14 in.
33 x 47 x 35.5 cm
24 lb.
11 kg
